13U... - Series
Stainless Steel Isolated Pressure Sensor Cells
January 1998/073
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com
FEATURES
· 0 ... 1000 to
0 ... 5000 psia
· Low Cost
· Isolated
· Rugged - Stainless Steel
· Small Size
· Absolute Pressure
· Reliable Semiconductor
Technology
GENERAL DESCRIPTION
These stainless steel devices were
developed for pressure applications that
involve measurement of a hostile media in
harsh environments. These sensors will
accommodate any media that will not
adversely attack 316 stainless steel. This
series uses SenSym´s proven
piezoresistive semiconductor sensor chip
in an oil isolated housing. This design has
proven to be highly reliable,stable and
accurate.
The13U series sensors feature either a
weld ring collar or threaded mail port for
pressure connection.
APPLICATIONS
· OEM industrial
process control
EQUIVALENT CIRCUIT
ELECTRICAL CONNECTIONS
13U... Cell 13U... with Port
Scale: 1cm 1 inch
PRESSURE SENSOR CHARACTERISTICS (all devices)
Environmental Specifications
Temperature Ranges:
Operating -10°C to +85°C
Storage -20°C to +125°C
Shock: 75G for 6 mscc
Insulation Resistance: 100 MΩ at 50 vdc
Vibration: 17g RMS
Maximum Ratings
Supply Voltage VS+7.5 VDC
13U... - Series
Stainless Steel Isolated Pressure Sensor Cells
January 1998/073
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com
PRESSURE RANGE SPECIFICATIONS
Sensym Part Number
13U1000A(C,M)
13U2500A(C,M)
13U5000A(C,M)
PERFORMANCE CHARACTERISTICS1
Min.
-20
100
---
-2600
+690
---
---
---
---
---
---
Max.
+20
200
1.0
-2000
+810
---
---
---
---
---
---
Typ.
0
150
0.2
-2300
+750
+4
0.1
0.1
4.0
4.0
0.1
Unit
mV
mV
%FS
ppm/°C
ppm/°C
µV/V/°C
%FS
ms
kΩ
kΩ
%FS
Characteristic
Zero Pressure Offset TA = 72°F
Full-scale Span2
Combined Linearity and Hysteresis3
Temperature Coefficient of Span
Temperature Coefficient of Resistance4
Temperature Effect on Offset4
Long Term Stability of Offset and Sensitivity5
Response Time (10% to 90%)6
Input Impedance TA = 25°C
Output Impedance
Repeatability4
Pressure Range
0-1000 PSIA
0-2500 PSIA
0-5000 PSIA
Burst Pressure
10,000 PSIA
10,000 PSIA
10,000 PSIA
PHYSICAL DIMENSIONS
Cell package
Mass: 11 g
Ported Male package
Mass: 23 g Dimensions in inches (mm)
13U... - Series
Stainless Steel Isolated Pressure Sensor Cells
January 1998/073
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com
SPECIFICA TION NOTES:
1. Reference conditions (unless otherwise noted): Supply Voltage, VS = 5 VDC; TA = 25°C;
2. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage
3. Linearity is based on besst fit straight line. Hysteresis is the maxium output difference at any point within the operating pressure range for increasing and decreasing pressure.
4. Typical error of the offset voltage over the 0 to 50°C reading. Note, the typical temperature coefficients of span and resistance are based on best fit line between 0 to 50°C.
5. Long term stability over a one year period.
6. Response time for 0 psi to full scale span pressure step change
ORDERING INFORMA TION
Pressure range
0 to 1,000 psi
0 to 2,500 psi
0 to 5,000 psi
cell
13U1000AC
13U2500AC
13U5000AC
male port
13U1000AM
13U2500AM
13U5000AM
SenSym and Sensortechnics reserve the right to make changes to any products herein. SenSym and Sensortechnics do not assume any liability arising out of the application or use of any product
or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.