Libertyville, IL (847) 680-7400
18
DK
18
DKSeries
Enhanced Performance K Series
RFI Power Line Filters
UL Recognized
CSA Certified
VDE Approved
DK Series
The DK series RFI power line filters are general
purpose common mode and differential mode filters
with higher performance line-to-line attenuation than
the VK series.
The EDK series has the same high performance
line-to-line attenuation while still meeting the very low
leakage current requirements of VDE portable
equipment and UL544 nonpatient care equipment.
Electrical Schematic
Specifications
Maximum leakage current,
each line-to-ground
@ 120 VAC 60 Hz:.4 mA.22 mA
@ 250 VAC 50 Hz:.7 mA.38 mA
Hipot rating (one minute):
line-to-ground2250 VDC
line-to-line1450 VDC
Operating frequency:50/60 Hz
Rated voltage:120/250 VAC
Rated current:@ 120 VAC@ 250 VAC
1VDK/1EDK1A1A
3VDK/3EDK3A3A
6VDK/6EDK6A6A
10VDK/10EDK10A8A
20EDK/20EDK20A16A
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
CurrentFrequency–MHz
Rating.15.5151030
VDK Models
1A, 3A183040484840
6A, 10A, 20A102230394450
EDK Models
1A, 3A172733454540
6A, 10A, 20A101925344046
Line-to-line in 50 ohm circuit
CurrentFrequency–MHz
Rating.15.5151030
VDK, EDK Models
1A, 3A184762605045
6A, 10A, 20A204355656055
Resistor location for reference only.
DK6
DK1
DK3
VDK ModelsEDK Models
Libertyville, IL (847) 680-7400
DK
19
Case Dimensions
Metric shown in italics.
AB C D E
Part No.(max)(max)(max)(max)
1VDK1, 1EDK13.352.071.162.3752.81
85.152.629.560.3371.4
1VDK3, 1EDK32.072.071.162.3752.81
52.652.629.560.3371.4
3VDK1, 3EDK13.852.071.162.9383.35
6VDK1, 6EDK197.852.629.574.6385.1
3VDK3, 3EDK32.562.071.162.9383.35
6VDK3, 6EDK365.052.629.574.6385.1
10VDK1,3.852.071.322.9383.35
10EDK197.852.633.574.6385.1
10VDK3,2.572.071.322.9383.35
10EDK365.352.633.574.6385.1
20VDK1,3.852.581.782.9383.35
20EDK197.865.545.274.6385.1
20VDK63.462.581.782.9383.35
87.965.545.274.6385.1
Ordering Information
Consult your local Corcom sales representative for pricing.
Case Styles
Metric shown in italics.
Series DK
20VDK1/20EDK1
VDK1/EDK1
VDK3/EDK3
Torque 18± 2 in.lb.
± .015
± .38
Available Part Numbers
1VDK11EDK1
1VDK31EDK3
3VDK13EDK1
3VDK33EDK3
6VDK16EDK1
6VDK36EDK3
10VDK110EDK1
10VDK310EDK3
20VDK120EDK1
20VDK6
Typical dimensions
Wire leads: Min. Mounting holes: Dia. (2)
4.0
101.6.188
4.78
Typical dimensions
Terminals: (5) Holes: Dia.(4) Slot: Mounting holes: Dia.(2)
.250
6.35.07
1.8.188
4.78
.07 x .16
1.8 x 4.1
Typical dimensions
Terminals: (5) Holes: Dia.(4) Slot: Mounting holes: Dia.(2)
.250
6.35.07
1.8.188
4.78
.07 x .16
1.8 x 4.1
20VDK6
