www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.025/02/13
Glass Passivated Bridge Rectifier
Features:
• Rating to 1,000V PRVP
• Ideal for Printed Circuit Board
• Low Forward Voltage Drop, High Current Capability
• Reliable Low Cost Construction Utilizing Moulded Plastic Technique
Results in Inexpensive Product
Note:
(1) Measured at 1MHz and applied reverse voltage of 4V DC
(2) Thermal resistance from junction to ambient mounted on PCB with 0.5ʺ × 0.5ʺ (13 × 13mm) copper pads
Characteristic Symbol DF06S-T Units
Maximum repetitive peak reverse voltage VRRM 600 V
Maximum RMS voltage VRWS 420 V
Maximum DC blocking voltage V DC 600 V
Maximum average forward Output current at TA = 40°C IF(AV) 1 A
Peak forward surge current 8.3ms single half-sine-wave superimposed
on rated load (JEDEC METHOD) IFSM 50 A
Maximum instantaneous forward voltage at 1A DC VF1.1 V
Maximum DC reverse current TJ=25°C
at rated DC blocking voltage TJ=125°C IR10
500 μA
It Rating for fusing (t < 8.3ms) I2t 10.4 A2S
Typical junction capacitance per element (Note1) CJ25 pF
Typical thermal resistance (Note 2) RθJA 40 °CW
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C
Maximum Ratings and Thermal Characteristics
Ratings at 25°C ambient temperature unless otherwise specied
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate by 20%.
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.025/02/13
Glass Passivated Bridge Rectifier
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.025/02/13
Glass Passivated Bridge Rectifier
DFS
Dim. Min. Max.
A 8.2 8.6
B 6.1 6.5
C2.35 2.65
D 9.6 10.1
E0.25 Typ.
F 0.9 1.5
G 0.2 Max.
H 2.5 2.8
I 1 1.4
K 4.8 5.2
Dimensions : Millimetres
Package Outline Dimensions
Device Package Shipping
DF06S-T DFS 50unit/pipe
Package Information
Description Part Number
Glass Passivated Bridge Rectier DF06S-T
Part Number Table
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
