External dimensions (Unit : mm) RPR-220 6.4 2.8 Applications Unit mA 5 V PD 80 mW Collector-emitter voltage VCEO 30 V Emitter-collector voltage VECO 4.5 V Collector current IC 30 mA Collector power dissipation PC 80 mW Compact disc players Copiers Game machines Office automation equipment C -30 to +85 C 4-0.6 4- Symbol Min. Typ. Max. Unit VF - 1.34 1.6 V IF=50mA Output Input charac- characteristics teristics IR - - 10 A VR=5V ICEO - - 0.5 A VCE=10V Peak sensitivity wavelength P - 800 - nm Transfer characteristics Conditions Forward voltage Collector current IC 0.08 0.3 0.8 mA VCE(sat) - 0.1 0.3 tr tf - 10 Cut-off frequency fC - Peak light emitting wavelength P - Dark current Infrared light emitter diode - Reflector VCE=2V, IF=10mA V IF=20mA, IC=0.1mA - s VCE=5V, IF=20mA, RL=100 1 - MHz 940 - nm (2.8) (2.5) d = 6mm Collector-emitter saturation voltage Response time Photo transistor 2.5 0.1 Electrical and optical characteristics (Ta=25C) Reverse current 0.5 0.1 Response time Maximum sensitivity wavelength (1) -25 to +85 Tstg 1) A plastic lens is used for high sensitivity. 2) A built-in visible light filter minimizes the influence of stray light. 3) Lightweight and compact. (0.6) Topr Storage temperature (3.2) Features Operating temperature Parameter (0.6) 50 VR 1.4 IF Reverse voltage 4- 1.0 0.35 6.5 Limits Forward current Power dissipation 2.8 Min.20 Input (LED) Output (phototransistor ) Symbol Through hole 2.2 2.5 Absolute maximum ratings (Ta=25C) Parameter 2- 4.9 Reflective photosensor (photoreflector) tr tf - 10 - s P - 800 - nm Reflective photointerrupter Anode IF=50mA Collector Non-coherent Infrared light emitting diode used. VCC=5V, IC=1mA, RL=100 Cathode This product is not designed to be protected against electromagnetic wave. Notes: 1. Unspecified tolerance shall be 0.2 . 2. Dimension in parenthesis are show for reference. Emitter - Reflector object : Standard white paper. (Reflection ratio = 90%) 60 40 20 10 1 Standard paper(90%reflection) d=6mm 2.4 2.0 1.5 1.0 0.5 2.2 2.0 1.8 IF=40mA 1.6 1.4 30mA 1.2 1.0 0.8 20mA 0.6 15mA 0.4 10mA 5mA 0.2 2 4 6 8 10 12 0 0 14 Fig.1 Relative output vs. distance 2.0 1.6 1.2 10mA 1mA 0.8 0.4 0 0 20 40 60 80 100 AMBIENT TEMPERATURE : Ta (C) Fig.4 Forward voltage vs.ambient temperature POWER DISSIPATION / COLLECTOR POWER DISSIPATION : PD / PC (mW) 100 20 40 60 80 100 1.4 1.6 1.8 2.0 Fig.2 Forward current vs. ambient temperature Fig.3 Forward current vs. forward voltage PD 40 20 0 1.2 AMBIENT TEMPERATURE : Ta (C) 60 0 1.0 FORWARD VOLTAGE : VF (V) PC 80 0.1 0.8 RELATIVE COLLECTOR CURRENT : IC (%) 1 0 DISTANCE : d (mm) FORWARD VOLTAGE : VF (V) 100 2.5 20 40 60 80 100 AMBIENT TEMPERATURE : Ta (C) Fig.5 Power dissipation / collector power dissipation vs. ambient temperature 120 100 80 60 40 20 20 40 60 80 20 30 40 50 Fig.7 Collector current vs. forward current 140 0 10 FORWARD CURRENT : IF (mA) 160 0 -60 -40 -20 0 0 100 AMBIENT TEMPERATURE : Ta (C) Fig.6 Relative output vs. ambient temperature DARK CURRENT : ICEO (A) 80 VCE=2V d=6mm Ta=25C COLLECTOR CURRENT : IC (mA) 10 FORWARD CURRENT : IF (mA) 100 COLLECTOR CURRENT : IC (mA) 1A 100 FORWARD CURRENT : IF (mA) RELATIVE COLLECTOR CURRENT : IC (%) Electrical and optical characteristics curves 0 0 5 10 15 20 COLLECTOR-EMITTER : VCE (V) Fig.8 Output characteristics 25 1 VCE=30V 20V 10V 0.1 0.01 0.001 -100 -80 -60 -40 -20 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE : Ta (C) Fig.9 Dark current vs. ambient temperature Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1