B5TE001SG - OMRON - Datasheet.Directory

B5T-001001(G)

Human Vision Components

Human “Sensing” and “Understanding”

by OMRON image sensing technology

• People’s conditions recognizable simply by mounting

an HVC on equipment

• Full range of functions

Ten different sensing functions are incorporated to

recognize the intentions and conditions of people

from a variety of perspectives.

Available functions are:

1) Human Body Detection, 2) Hand Detection, 3) Face Detection,

4) Face Direction Estimation, 5) Age Estimation, 6) Gender Estimation,

7) Blink Estimation, 8) Expression Estimation (satisfied, unsatisfied,

five different expressions:happiness, surprise, anger, sadness, and neutral),

9) Face Recognition, and 10) Gaze Estimation

• High precision

Application Example

• Home appliances

• Marketing research (POS registers and automatic venders)

• Industrial equipment (food processing equipment)

• Robotics (robotic pets)

Ordering Information

■ Standard Models with Surface Mounting Terminals

Note: There are 2 product models, the development kit is B5T-E-001-S(G).

Refer to page 11 for details.

RoHS compliant

Packaging Model Minimum Order Quantity

BOX B5T-001001(G) 1

B5T-001001(G) Human Vision Components

B5T-001001(G)

Ratings, Specifications, and Function

■ Rating

■ Specifications and Functions

Input Image Specifications

Output Image Specifications

Image Sensing Functions

Item Specifications

Power supply voltage 5 V ±10%

Power consumption Less than 0.25 A

Operating temperature 0 to +50°C (no condensation or freezing)

Operating humidity Below 90% RH (no condensation or freezing)

Storage temperature -30 to +70°C (no condensation or freezing)

Storage humidity Below 90% RH (no condensation or freezing)

Item Specifications

Resolution 640 × 480 pixels

Horizontal detection range (angle of view) 49+/-3deg

Vertical detection range (angle of view) 37+/-3deg

Optical axis angle range +/-7deg

Alignment angle range +/-3deg

Item Specifications

Output image No image / 160 × 120 pixels / 320 × 240 pixels (choose one)

Image format RAW (8-bit, Y data)

Function Output Details

Human Body Detection,

Hand Detection,

Face Detection

Number of detected objects Maximum of 35 per object type

Position (center coordinates) Coordinates on the screen from the top-left corner of the screen (in pixels)

Size Pixel size on the input image

Degree of confidence Confidence in the detection result (0 to 1000), a higher value indicates a higher confidence

Face Direction Estimation

Yaw angle Positive to the right (in degrees)

Pitch angle Positive upwards (in degrees)

Roll angle Positive clockwise (in degrees)

Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence

Age Estimation Age 0 to 75 (75 includes higher ages)

Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence

Gender Estimation Gender Male or female

Degree of confidence Confidence in the estimation result (0 to 1000), a higher value indicates a higher confidence

Blink Estimation Blink degree Output for both eyes (1 to 1000), a higher value indicates the eye is closer to being fully shut

Expression Estimation

Score for 5 expressions

0 to 100

The score will be output for each expression (“neutral”, “happiness”, “surprise”, “anger” and

“sadness”). The score indicates the likeliness of a face displaying the estimated expression,

where a higher score indicates a higher likeliness of being that expression.

Expression degree (positive or negative)

+100 to -100

A degree closer to +100 indicates a high degree of “happiness” while a degree closer to

-100 indicates a high degree of “surprise”, “anger” or “sadness”.

Face Recognition

Individual identification result Displays the registered User ID, or “non-registered” for non-registered individuals Maximum

number of users: 500

Score

Matching degree (0 to 1000)

The result of the user with the highest matching degree is output.

A degree closer to 1000 indicates a higher likeliness of being that user.

Gaze Estimation Yaw angle Positive to the right (in degrees)

Pitch angle Positive upwards (in degrees)

B5T-001001(G) Human Vision Components

B5T-001001(G)

Detection Distance (for reference *)

* Caution: Please note that the detection and estimation performance will gradually fall when exceeding the maximum distance indicated for reference.

Please note that being within the range indicated above does not always guarantee successful detection.

Angle range (for reference *1)

*1. The detection and estimation accuracy will fall when outside the specified angle range.

Please note that being within range indicated above does not always guarantee successful detection.

*2. “Up direction 15°” indicates that the camera is looking up to the target from a 15° downward angle and “Down direction -30°” indicates that the camera is looking

down to the target from a 30° upward angle.

*3. This indicates all the directions to the left and right of the human body.

*4. This is the angle when facing the camera.

Specifications for Signal with Host

Function Maximum distance

Human Body Detection 2.8 meters

Hand Detection 1.5 meters

Face Detection, Face Direction

Estimation, Gaze Estimation, Blink

Estimation, Age Estimation, Gender

Estimation, Expression Estimation, Face Recognition

1.3 meters

Function Pitch angle Yaw angle Roll angle

Human Body Detection Up direction 15°

Down direction -30° *2 360° *3 +/-10°

Hand Detection +/-20° +/-30°

Face Detection +/-30° +/-90°

+/-45°

Face Direction Estimation

Face direction +/-20° Face direction +/-30°

Age Estimation

Gender Estimation

Blink Estimation

Expression Estimation

Face Recognition

Gaze Estimation Gaze angle +/-20° *4

(up to +/-10° for face direction)

Gaze angle +/-30° *4

Up to +/-20° for face direction

Item Specifications

Outline Receives the command controlling the module from the host and sends

back the detection result info

Transmission system Full-duplex bidirectional system

Transmission protocol Non-procedure

Synchronization system Asynchronous method

Data format Start: 1 bit, Data: 8 bit, Stop: 1 bit, no parity

Transmission code NRZ, Logic Low: 0V Logic High: 3.3V

Transmission speed Please refer to the description of the DIP Switch SW2.

B5T-001001(G) Human Vision Components

B5T-001001(G)

■ Definition of the image input specification

Horizontal and vertical detection ranges.

Optical axis angle

Alignment angle

Vertical detection

range

Horizontal detection range

Reference surface

Shooting image

A: Optical axis from the camera center when mounted

in default position.

B: Optical axis displaying the camera's shooting range.

The optical axis angle will be the angle difference

between A and B.

Shooting image

Default horizontal line

C: Default horizontal line when mounted in

default position.

D: Horizontal line for the shooting image.

The alignment angle is the angle

difference between C and D.

B5T-001001(G) Human Vision Components

B5T-001001(G)

Connection

■ Block Diagram

UART

(3.3V)

UART (3.3V)

Command Response

Reset

5 VDC power source

Circuit board

(Customer side)

Camera module

Recognition

Processing

Section

CN1

HVC-P

B5T-001001(G) Human Vision Components

B5T-001001(G)

Parts Name and Functions

Front

Back

* DIP Switch SW2 setting.

The function of each bit is as follows:

SW2-1: Fixed to ON (Please do not set it to OFF).

SW2-2 to 2-4: Used to set the transmission rate setting of the UART signal.

Signal Name Function

CN1 Connector 1 UART signal, power switch, reset input

(cannot be connected simultaneously with CN4)

CN2 Connector 2 Not usable

LED1 LED1 Lit when power is ON

Signal Name Description

CN4 Connector 4 Reserved for OMRON HVC-P Evaluation Kit.

(cannot be connected simultaneously with CN1)

SW1 Tact switch Reset input for The Product

SW2 DIP switch Transmission rate setting of the UART signal *

Transmission rate (bps) SW2-2 SW2-3 SW2-4

9,600 OFF OFF OFF

38,400 ON OFF OFF

115,200 OFF ON OFF

230,400 ON ON OFF

460,800 OFF OFF ON

921,600 (factory setting) ON OFF ON

UART 5Pin

Camera module

A protective seal is applied on the lens of

any new product in order to protect it.

Please make sure to remove it before

using the product.

CN1CN2 LED1

OFF

CN４

SW1SW2

SW2-4

SW2-3

SW2-2

SW2-1

B5T-001001(G) Human Vision Components

B5T-001001(G)

Dimensions (Unit: mm)

Front

Camera Device

Four-3.2 dia.

53.5±0.1 3

4034±0.1

5.8

8.4

3.8

44.3

17±0.5

1.4±0.5

35.9

2.54 × 5

9.1

32.3

32.8

5.3

Side

Back

6.0

1 to 2 mm (×4)

Glue is applied as mentioned

above for camera fixing.

1.9 33.8±0.2

6.0 dia.

5.0 dia.

B5T-001001(G) Human Vision Components

B5T-001001(G)

Connector Pin Configuration

Please keep CN2 free of any connection.

CN4 is reserved for the OMRON HVC-P Evaluation Kit.

CN4 cannot be used simultaneously with CN1.

CN1 is used to connect to the power supply and the UART signal interface.

Connector: SM05B-SRSS-TB (made by J.S.T. Mfg. Co. Ltd.)

Recommended connector on the other end:

Housing: SHR-05V-S (made by J.S.T. Mfg. Co. Ltd.)

Contact: SSH-003T-P0.2 (made by J.S.T. Mfg. Co. Ltd.)

* Set the UART RX logic 0 to 0V when the Product is turned OFF.

Mounting (Unit: mm)

*1. This figure is for a frontal mounting direction (0°) of the module.

The software settings need to be changed when set to a 90°, 180° or 270° clockwise mounting direction from the front (0°).

*2. Use the M3 screws to fix the board in the four corners.

Make sure to not bend or break the board when fixing the screws.

Make sure to also use the tightening torques provided.

Make sure to fix the board so that it is not warped, bent or any under unreasonable stress.

Make sure that the board is sufficiently distanced from any electrically-conductive part.

*3. The 6 dia. (×4) hatching sections indicate the acceptable area for metallic components.

*4. Do not subject the board to stress, such as twisting or bending, when fixing it.

*5. Fix the board in a safe distance from the surrounding current-carrying elements.

Pin number Signal I/O Description

1 Vcc - Power supply: 5.0VÅ}10%

2 UART RX * Input UART signal (from host to HVC-P)

Logic 0: 0V Logic 1: 3.3V

3 UART TX Output UART signal (from HVC-P to host)

Logic 0: 0V Logic 1: 3.3V

4 GND - Ground

5 RESET Input

Reset signal (from host to HVC-P)

Logic 0: 0V Logic 1: 3.3V

Reset is active on logic 0

Four-3.2 dia. (Hole) *2Mounting direction *1

Four-6 dia. (Hatching) *3

B5T-001001(G) Human Vision Components

B5T-001001(G)

Safety Precautions

Definition

The definition of terms used in these Terms and Conditions are

as follows:

(1)

Omron Product: HVC-P described in specifications.

(2)

Usage conditions: Usage conditions, rating, performance,

operating environment, handling instructions, cautions, pro-

hibited use, etc. of Omron products described in specifica-

tions, documentations or manuals.

(3)

Customer devices etc.: Parts/components, electronic sub-

strates, devices, equipment or systems manufactured by

customers.

(4)

Customer application: Application of Omron products by

customers which include embedding and/or using Omron

products in Customer devices etc.

(5)

Fitness: (a) Fitness, (b) performance, (c) non-infringement

of third-party intellectual property, (d) compliance with laws

and regulations and (e) conformity to various standards.

Caution on Descriptions

Attention is required to the following points on descriptions in

specifications.

(1)

Rated values and performance values are the product of

tests performed for separate single conditions, including but

not limited to temperature and humidity. It is not intended to

warrant rated values and performance values for multiple

combined conditions.

(2)

Reference data are provided for reference only. Omron does

NOT warrant that Omron products work properly at all time

in the range of reference data.

(3)

Application examples are provided for reference only.

Omron does NOT warrant the Fitness of Omron products

under such application.

(4)

Omron may discontinue the production of Omron products

or change the specifications of them for the purpose of

improving such products or other reasons entirely at its own

discretion.

(5)

Descriptions in specifications and technical information pro-

vided by Omron shall be deemed confidential information of

Omron. Please do not disclose them to any third party.

Precautions

Please be aware of and accept the following when you introduce

or use Omron products:

(1)

Please use Omron products in compliance with usage con-

ditions including rating and performance.

(2)

Customers are granted to use software program provided as

a part of Omron products (hereinafter referred to as "Soft-

ware") solely combined with Omron product to be integrated

into Customer devices etc. Please do NOT do or have oth-

ers do any of the following.

(a)Use other than Customer application

(b)Transfer or loan Omron products singularly for purposes

other than Customer application

(d)Decompile, disassemble or reverse-engineer Software.

(e)Disclose performance information of singular Omron

products for purposes other than Customer application.

(f) Agree anything conflicting with Warranty and Limited

Warranty herein with customers of Customers or end

users of Customer devices etc.

(3)

Please confirm fitness of Omron products in your application

and use your own judgment to determine the appropriate-

ness of using them in such application. Omron shall not war-

rant the fitness of Omron products in customer application.

(4)

Please confirm that Omron products are properly wired and

installed for their intended use in your overall system.

(5)

When using Omron products, please make sure to (i) main-

tain a margin of safety vis-?-vis the published rated and per-

formance values, (ii) design to minimize risks to customer

application in case of failure of Omron products, such as

introducing redundancy, (iii) introduce system-wide safety

measures to notify risks to users of Customer devices etc.,

and (iv) conduct regular maintenance on Omron products

and customer application.

(6)

Omron products are designed and manufactured as gen-

eral-purpose products for use in general industrial products.

They are not intended to be used in the following applica-

tions.

If you are using Omron products in the following applica-

tions, Omron shall not provide any warranty for such Omron

products.

(a)Applications with stringent safety requirements, including

but not limited to nuclear power control equipment, com-

bustion equipment, aerospace equipment, railway equip-

ment, elevator/lift equipment, amusement park

equipment, medical equipment, safety devices and other

applications that could cause danger/harm to people's

body and life.

(b)Applications that require high reliability, including but not

limited to supply systems for gas, water and electricity,

etc., 24 hour continuous operating systems, financial set-

tlement systems and other applications that handle rights

and property.

ment, including but not limited to outdoor equipment,

equipment exposed to chemical contamination, equip-

ment exposed to electromagnetic interference and equip-

ment exposed to vibration and shocks.

(d) Applications under conditions and environment not

described in specification.

(7)

In addition to the applications listed from (a) to (d) above,

Omron products are not intended for use in automotive

applications (including two wheel vehicles). Please do NOT

use Omron products for automotive applications. Please

contact Omron sales staff for products for automotive use.

Warranty and Limited Warranty

B5T-001001(G) Human Vision Components

B5T-001001(G)

Warranty Terms and Conditions

The terms and conditions for warranty of Omron products are as

follows:

(1)

Warranty period: One year after the purchase.

(2)

Coverage: Omron will provide free replacement of the mal-

functioning Omron products with the same number of

replacement/alternative products.

(3)

Exceptions: Omron will not cover Omron products under its

warranty if the cause of the malfunction falls under any of

the following.

(a)Usage in a manner other than the original intended use

for the Omron product.

(b)Usage outside of the usage conditions.

other than Omron personnel.

(d)Software program embedded by other than Omron or

alteration of originally installed software by other than

Omron.

(e)Cause which could not have been foreseen with the level

of science and technology at the time of shipping from

Omron.

(f) Causes originating from other than Omron or Omron

products (including force majeure such as but not limited

to natural disasters).

Limitation of Liability

The warranty set out in these Terms and Conditions is the whole

and sole liability for Omron products. There are no other warran-

ties, expressed or implied. Omron and the distributors of Omron

products are not liable for any damages which may arise from or

be related to Omron products.

Export Controls

Customers of Omron products shall comply with all applicable

laws and regulations of other relevant countries with regard to

security export control, when exporting Omron products and/or

technical documents or providing such products and/or docu-

ments to a non-resident.

Omron may not provide customers with Omron products and/or

technical documents should Omron judge that they fail to comply

with such laws and regulations.

• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious

influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or

equipment, and be sure to provide the system or equipment with double safety mechanisms.

OMRON Corporation

Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. A234-E1-03

0715(1014)(O)

Note: Do not use this document to operate the Unit.

B5T-001001(G)

Human Vision Components

Appendix HVC-P Package Contents

B5T-001001(G)

Human Vision Components

Appendix HVC-P CN4 Specification

■Reserved for OMRON HVC-P Evaluation Kit

It cannot be connected simultaneously with CN1.

■Connector Pin Configuration

Connector：XG8S-0631（OMRON）

CN4

１6