15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Main product characteristics VWM 17V - 280V VBR(min) 19V - 312V IPP 515A - 33A VCL(MAX) 29.3V - 454.5V PPP 15000W RoHS COMPLIANT HALOGEN FREE P600 Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtually instantaneous. As a result, they may also be used effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments and induced RF. They can also be used for protecting other sensitive components from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. * RoHS compliant (2002/95/EC), MSL level 1 (J-STD-020) * Qualified to automotive grade - AEC Q101 * Bi-directional devices are denoted by the suffixes C or CA, electrical characteristics apply in both directions. Maximum ratings and characteristics(1) Symbol PPPM IPPM Peak power dissipation with a 10/1000s waveform (fig. 1) (2) Value Unit Min. 15000 W See next table A 8.0 W 400 A 8.0 C/W 40 C/W RJL Peak pulse current with a 10/1000s waveform Steady state power dissipation at TL = 75C, lead lengths 0.375" (9.5mm) (3) Non repetitive peak forward surge current (8.3ms single half sine wave) (4) Typical thermal resistance junction to lead RJA Typical thermal resistance junction to ambient TSTG Storage temperature -55 to +175 C TJ Junction temperature -55 to +175 C PM(AV) IFSM (1) (2) (3) (4) Parameter All ratings at 25C unless specified otherwise Non-repetitive current pulse, per Fig. 3 and derated above TA = 25C per Fig. 2 Mounted as shown in Fig.5 Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Copyright (c) 2009 Aug Rev A www.Microsemi.com 1/6 15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Electrical characteristics(1) DEVICE BREAKDOWN (2) VOLTAGE , VBR VBR (V) @ IT (mA) Min TEST CURRENT IT (mA) Max STANDOFF VOLTAGE VWM (V) MAXIMUM STANDBY CURRENT (4) ID (A) @ VWM MAXIMUM PEAK PULSE CURRENT (3) IPP (A) MAXIMUM CLAMPING VOLTAGE VC (V) @ IPP MAXIMUM TEMPERATURE COEFFICIENT OF VBR VBR (%/ C) 15KPA17e3 / 15KPA17Ce3 18.99 20.89 50 17 5000 515.4 29.3 0.1 15KPA17Ae3 / 15KPA17CAe3 18.99 19.94 50 17 5000 515.4 29.3 0.1 15KPA18e3 / 15KPA18Ce3 20.11 22.12 50 18 5000 488.7 30.9 0.1 15KPA18Ae3 / 15KPA18CAe3 20.11 21.12 50 18 5000 488.7 30.9 0.1 15KPA20e3 / 15KPA20Ce3 22.34 24.57 20 20 1500 440.2 34.3 0.1 15KPA20Ae3 / 15KPA20CAe3 22.34 23.46 20 20 1500 440.2 34.3 0.1 15KPA22e3 / 15KPA22Ce3 24.57 27.03 10 22 500 407.0 37.1 0.1 15KPA22Ae3 / 15KPA22CAe3 24.57 25.80 10 22 500 407.0 37.1 0.1 15KPA24e3 / 15KPA24Ce3 26.81 29.49 5 24 150 371.0 40.7 0.1 15KPA24Ae3 / 15KPA24CAe3 26.81 28.15 5 24 150 371.0 40.7 0.1 15KPA26e3 / 15KPA26Ce3 29.04 31.94 5 26 50 343.2 44.0 0.1 15KPA26Ae3 / 15KPA26CAe3 29.04 30.49 5 26 50 343.2 44.0 0.1 15KPA28e3 / 15KPA28Ce3 31.28 34.41 5 28 25 317.9 47.5 0.1 15KPA28Ae3 / 15KPA28CAe3 31.28 32.84 5 28 25 317.9 47.5 0.1 15KPA30e3 / 15KPA30Ce3 33.51 36.86 5 30 15 297.8 50.7 0.1 15KPA30Ae3 / 15KPA30CAe3 33.51 35.19 5 30 15 297.8 50.7 0.1 15KPA33e3 / 15KPA33Ce3 36.90 40.59 5 33 2 276.1 54.7 0.1 15KPA33Ae3 / 15KPA33CAe3 36.90 38.75 5 33 2 276.1 54.7 0.1 15KPA36e3 / 15KPA36Ce3 40.20 44.22 5 36 2 252.5 59.8 0.1 15KPA36Ae3 / 15KPA36CAe3 40.20 42.21 5 36 2 252.5 59.8 0.1 15KPA40e3 / 15KPA40Ce3 44.70 49.17 5 40 2 229.5 65.8 0.1 15KPA40Ae3 / 15KPA40CAe3 44.70 46.94 5 40 2 229.5 65.8 0.1 15KPA43e3 / 15KPA43Ce3 48.00 52.80 5 43 2 216.3 69.8 0.1 15KPA43Ae3 / 15KPA43CAe3 48.00 50.40 5 43 2 216.3 69.8 0.1 15KPA45e3 / 15KPA45Ce3 50.30 55.33 5 45 2 207.4 72.8 0.1 15KPA45Ae3 / 15KPA45CAe3 50.30 52.82 5 45 2 207.4 72.8 0.1 15KPA48e3 / 15KPA48Ce3 53.60 58.96 5 48 2 194.3 77.7 0.1 15KPA48Ae3 / 15KPA48CAe3 53.60 56.28 5 48 2 194.3 77.7 0.1 15KPA51e3 / 15KPA51Ce3 57.00 62.70 5 51 2 182.1 82.9 0.1 15KPA51Ae3 / 15KPA51CAe3 57.00 59.85 5 51 2 182.1 82.9 0.1 (1) All ratings at 25C unless specified otherwise (2) VBR measured after IT applied for 300s, IT=square wave pulse or equivalent (3) Surge current waveform per Fig.3 and derated per Fig.2 (4) For bidrectional types with VWM of 30 volts and less, the ID limit is doubled Copyright (c) 2009 Aug Rev A www.Microsemi.com 2/6 15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Electrical characteristics (cont.) DEVICE BREAKDOWN VOLTAGE, VBR VBR (V) @ IT (mA) Min TEST CURRENT IT (mA) STANDOFF VOLTAGE VWM (V) MAXIMUM STANDBY CURRENT ID (A) @ VWM MAXIMUM PEAK PULSE CURRENT IPP (A) MAXIMUM CLAMPING VOLTAGE VC (V) @ IPP MAXIMUM TEMPERATURE COEFFICIENT OF VBR VBR (%/ C) Max 15KPA54e3 / 15KPA54Ce3 60.30 66.33 5 54 2 172.2 87.7 0.1 15KPA54Ae3 / 15KPA54CAe3 60.30 63.32 5 54 2 172.2 87.7 0.1 15KPA58e3 / 15KPA58Ce3 64.80 71.28 5 58 2 161.0 93.8 0.1 15KPA58Ae3 / 15KPA58CAe3 64.80 68.04 5 58 2 161.0 93.8 0.1 15KPA60e3 / 15KPA60Ce3 67.00 73.70 5 60 2 155.0 97.4 0.1 15KPA60Ae3 / 15KPA60CAe3 67.00 70.35 5 60 2 155.0 97.4 0.1 15KPA64e3 / 15KPA64Ce3 71.50 78.65 5 64 2 144.9 104.2 0.1 15KPA64Ae3 / 15KPA64CAe3 71.50 75.08 5 64 2 144.9 104.2 0.1 15KPA70e3 / 15KPA70Ce3 78.20 86.02 5 70 2 132.9 113.6 0.1 15KPA70Ae3 / 15KPA70CAe3 78.20 82.11 5 70 2 132.9 113.6 0.1 15KPA75e3 / 15KPA75Ce3 83.80 92.18 5 75 2 123.8 122.0 0.1 15KPA75Ae3 / 15KPA75CAe3 83.80 87.99 5 75 2 123.8 122.0 0.1 15KPA78e3 / 15KPA78Ce3 87.10 95.81 5 78 2 119.7 126.1 0.1 15KPA78Ae3 / 15KPA78CAe3 87.10 91.46 5 78 2 119.7 126.1 0.1 15KPA85e3 / 15KPA85Ce3 94.90 104.39 5 85 2 109.7 137.6 0.1 15KPA85Ae3 / 15KPA85CAe3 94.90 99.65 5 85 2 109.7 137.6 0.1 0.1 15KPA90e3 / 15KPA90Ce3 100.50 110.55 5 90 2 103.7 145.6 15KPA90Ae3 / 15KPA90CAe3 100.50 105.53 5 90 2 103.7 145.6 0.1 15KPA100e3 / 15KPA100Ce3 111.70 122.87 5 100 2 93.6 161.3 0.1 15KPA100Ae3 / 15KPA100CAe3 111.70 117.29 5 100 2 93.6 161.3 0.1 15KPA110e3 / 15KPA110Ce3 122.90 135.19 5 110 2 84.5 178.6 0.1 15KPA110Ae3 / 15KPA110CAe3 122.90 129.05 5 110 2 84.5 178.6 0.1 15KPA120e3 / 15KPA120Ce3 134.00 147.40 5 120 2 78.5 192.3 0.1 15KPA120Ae3 / 15KPA120CAe3 134.00 140.70 5 120 2 78.5 192.3 0.1 15KPA130e3 / 15KPA130Ce3 145.20 159.72 5 130 2 72.5 208.3 0.1 15KPA130Ae3 / 15KPA130CAe3 145.20 152.46 5 130 2 72.5 208.3 0.1 15KPA150e3 / 15KPA150Ce3 167.60 184.36 5 150 2 62.4 241.9 0.1 15KPA150Ae3 / 15KPA150CAe3 167.60 175.98 5 150 2 62.4 241.9 0.1 15KPA160e3 / 15KPA160Ce3 178.70 196.57 5 160 2 58.4 258.6 0.1 15KPA160Ae3 / 15KPA160CAe3 178.70 187.64 5 160 2 58.4 258.6 0.1 15KPA170e3 / 15KPA170Ce3 189.90 208.89 5 170 2 55.4 272.7 0.1 15KPA170Ae3 / 15KPA170CAe3 189.90 199.40 5 170 2 55.4 272.7 0.1 15KPA180e3 / 15KPA180Ce3 201.10 221.21 5 180 2 52.3 288.5 0.1 15KPA180Ae3 / 15KPA180CAe3 201.10 211.16 5 180 2 52.3 288.5 0.1 15KPA200e3 / 15KPA200Ce3 223.40 245.74 5 200 2 47.3 319.1 0.1 15KPA200Ae3 / 15KPA200CAe3 223.40 234.57 5 200 2 47.3 319.1 0.1 Copyright (c) 2009 Aug Rev A www.Microsemi.com 3/6 15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Electrical characteristics (cont.) DEVICE BREAKDOWN VOLTAGE, VBR VBR (V) @ IT (mA) Min TEST CURRENT IT (mA) Max STANDOFF VOLTAGE VWM (V) MAXIMUM STANDBY CURRENT ID (A) @ VWM MAXIMUM PEAK PULSE CURRENT IPP (A) MAXIMUM CLAMPING VOLTAGE VC (V) @ IPP MAXIMUM TEMPERATURE COEFFICIENT OF VBR VBR (%/ C) 15KPA220e3 / 15KPA220Ce3 245.70 270.27 5 220 2 35.2 428.6 0.1 15KPA220Ae3 / 15KPA220CAe3 245.70 257.99 5 220 2 35.2 428.6 0.1 15KPA240e3 / 15KPA240Ce3 268.10 294.91 5 240 2 39.3 384.6 0.1 15KPA240Ae3 / 15KPA240CAe3 268.10 281.51 5 240 2 39.3 384.6 0.1 15KPA260e3 / 15KPA260Ce3 290.40 319.44 5 260 2 36.2 416.7 0.1 15KPA260Ae3 / 15KPA260CAe3 290.40 304.92 5 260 2 36.2 416.7 0.1 15KPA280e3 / 15KPA280Ce3 312.80 344.08 5 280 2 33.2 454.5 0.1 15KPA280Ae3 / 15KPA280CAe3 312.80 328.44 5 280 2 33.2 454.5 0.1 Copyright (c) 2009 Aug Rev A www.Microsemi.com 4/6 15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Fig. 2 - Pulse Derating Curve Fig. 1 - Peak Pulse Power Rating Curve 100 Peak Pulse Power (P PP) or Current (I PP) Derating in Percentage % PPPM-Peak Pulse Power (kW) 1000 100 10 1 0.000001 80 60 40 20 0 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200 TA-Ambient temperature (o C) td -Pulse Width (sec.) Fig. 6 - Maximum Non-repetitive Forward Surge Current IFSM, Peak Forward Surge Current (A) 450 400 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz Copyright (c) 2009 Aug Rev A www.Microsemi.com 5/6 15KPA17e3 to 15KPA280CAe3 15000W Transient Voltage Suppressor (TVS) protection device Mechanical Characteristics Physical dimensions Package materials & information Case : Epoxy meets UL94V-0 Electrode finish : Matte Sn plating fully RoHS compliant Terminals : solderable per MIL-STD750, Method 2026 Marking code : MSC-YYWW 15KPAxxQZ YYWW = Date code xx = Breakdown voltage, VBR Q = "C" if bi-directional or blank if unidirectional Z = "A" if VBR has 5% tolerance or blank if VBR has 10% tolerance POLARITY : For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation. Ordering information Product order code Package Weight Base qty Delivery mode P600 0.07oz. 2.5g 800 Tape and reel (13 inch) 15KPAxxYZe3/TR13 For example : 15KPA17CAe3/TR13 or 15KPA36Ae3/TR13 Commercial Business Unit Microsemi Corporation Microsemi Commercial Offshore de Macau Limitada Avenida Doutor Mario Soares Bank of China Building, 18/F, Unit D Macau SAR Copyright (c) 2009 Aug Rev A Please refer to www.microsemi.com for the terms and conditions of purchase www.Microsemi.com 6/6