SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21A226MAQNNNE CAP, 22, 25V, 20%, X5R, 0805 Description : Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series CL 21 A 226 M A Q N N N E Samsung Multi-layer Ceramic Capacitor Size 0805 (inch code) Dielectric X5R Capacitance Capacitance L: 2.0 0.15 25 V Rated Voltage Thickness 1.25 0.15 mm 1.25 0.15 mm W: Inner electrode Ni Termination Cu Plating Sn 100% 22 20 % tolerance mm (Pb Free) Product Normal Special Reserved for future use Packaging Embossed Type, 7" reel B. Samsung Reliability Test and Judgement condition Performance 0.50.1Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characteristics Adhesive Strength (From -55 to 85, Capacitance change should be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 12020% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours 3 direction (x, y, z) With rated voltage Resistance Tan : IR : 0.2 max 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : IR : within 12.5% within 12.5% 0.2 max With 100% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.