855035 140 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 1dB bandwidth of 0.47 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions: 19.00 x 6.50 x 1.75mm Hermetically sealed RoHS compliant, Pb-free Input Gnd Gnd Gnd Output 10 9 8 7 6 1 2 3 4 5 Gnd Gnd Gnd Gnd Gnd General Description Pin Configuration The 855035 is a high-performance IF SAW filter with a center frequency of 140 MHz and a 1dB bandwidth of 0.47 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # SE Description 10 6 1,5 2,3,4,7,8,9 Input Output Ground Case ground This device is RoHS compliant and Pb-free. Ordering Information Part No. Description 855035 855035-EVB packaged part evaluation board Standard T/R size = 2000 units/reel. Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855035 140 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) +25 C Parameter (3) Conditions Center Frequency Minimum Insertion Loss 1.0 dB Lower Bandedge (5) 1.0 dB Upper Bandedge (5) 1.0 dB Bandwidth (5) 40.0 dB Bandwidth (5) Passband Ripple(6) 139.823 - 140.188 MHz 139.823 - 140.188 MHz Group Delay Variation Absolute Group Delay Relative Attenuation 10 - 63.507 MHz 63.507 - 137.013 MHz 142.998 - 210 MHz - Source Impedance (single-ended) (7) Load Impedance (single-ended) (7) Min Typical (4) Max 18.2 140.188 0.35 - 140 18.5 139.78 140.26 0.47 2.4 0.05 21.3 139.823 3.98 0.2 MHz dB MHz MHz MHz MHz dB p-p 50.4 50.4 50.4 - 78 1.88 79 63 55 50 50 200 - ns p-p s dB dB dB Units Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. Passband Ripple is defined as the worst case difference between a peak and an adjacent valley within defined frequency points 7. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature(8) Storage Temperature -40 to +85 oC -40 to +85 oC 8. Device may operate over this range with degraded Electrical Specifications Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855035 140 MHz SAW Filter Reference Design - 50 SE Input, 50 SE Output Schematic 110nH 10 50 Single-ended Input 50 270nH 6 1,2,3,4 5,7,8,9 270nH 50 Single-ended Output 50 Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration 8.86 960911 2.51 L1 L3 L2 523750 SAWTEK 855035 JJJYHH 6.70 2.00 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick 1.22 .69 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 L2 L3 SMA PCB 270nH 110nH 270nH N/A N/A Coil Wire-wound, 0805, 5% Coil Wire-wound, 0805, 5% Coil Wire-wound, 0805, 5% SMA connector 3-layer Coilcraft Coilcraft Coilcraft Radiall USA Inc. multiple 0805CS-271XJLC 0805CS-111XJLC 0805CS-271XJLC 9602-1111-018 960656 Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855035 140 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855035 140 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-75 Dimensions: 19.00 x 6.50 x 1.75mm 523750 SAWTEK 855035 JJJYHH ID Dot Date Code 1.75 NOM. 1.96 MAX. Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 19.0 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and H= the hour of the day - Military (2 digits) 1.91 1.80 R0.51 6.50 2.31 1.02 Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters ID dot 32.8 2.7 Section A-A O330 0.3 4.0 2.0 O1.5 R0.75 A 1.75 14.2 O102 32.0 19.6 O20.2 O13.0 2.0 28.4 Direction of travel 0.20 2.3 Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - 7.1 12.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 855035 140 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 2 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes 3300 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: C Value: Passes 800 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev - 5/27/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)