854668 70 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 3 dB bandwidth of 16.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions: 13.30 x 6.50 x 1.75mm Hermetic RoHS compliant, Pb-free Gnd Gnd Gnd Gnd 10 9 8 7 Input 11 Gnd General Description 12 1 2 3 4 Gnd Gnd Gnd Gnd 6 Gnd 5 Output Pin Configuration The 854668 is a high-performance IF SAW filter with a center frequency of 70 MHz and a 3.0 dB bandwidth of 16.5 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # SE Description 11 5 6,12 1,2,3,4 7,8,9,10 Input Output Ground Case Ground Case Ground The device is RoHS compliant and Pb-free. Ordering Information Part No. Description 854668 854668-EVB packaged part evaluation board Standard T/R size = 2000 units/reel. Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854668 70 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) +25 C Parameter Center Frequency Insertion Loss 1 dB Bandwidth(4) 3 dB Bandwidth(4) 40 dB Bandwidth(4) Passband Ripple Phase Linearity Group Delay Variation Absolute Delay Variation Temperature Coefficient Source Impedance single-ended (5) Load Impedance single-ended (5) Conditions At Center Frequency 62.8- 77.2 MHz 62.8- 77.2 MHz 62.8- 77.2 MHz 62.8- 77.2 MHz Min Typical (3) Max 69.8 15.2 16 - 70 12.5 15.52 16.5 21.4 0.27 7.75 70 1.07 -94 50 50 70.2 13.5 22 1.0 11.5 100 - Units MHz dB MHz MHz MHz dB p-p o p-p ns p-p s ppm/ C Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. All specifications are tested at room temperature only 3. Typical values are based on average measurements at room temperature 4. Relative to Insertion loss at center frequency 5. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature (6) Storage Temperature Input Power (at +55 C for 10K hours max) -40 to +85 oC -40 to +85 oC +20dBm 6. Device may operate over this range with degraded Electrical Specifications Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854668 70 MHz SAW Filter Reference Design 1 - 50 SE Input, 50 SE Output Schematic 120nH 100nH 11 50 Single-ended Input 50 5 50 Single-ended Output 50 1,2,3,4,6 7,8,9,10,12 Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 13.51 1.70 3.53 960685 L1 6.70 SAWTEK 854668 JJJYHH L2 .99 .99 1.55 1.70 8.61 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 L2 SMA PCB 120 nH 100 nH N/A N/A Coil Wire-wound, 0805, 5% Coil Wire-wound, 0805, 5% SMA connector 3-layer Coilcraft Coilcraft Radiall USA Inc. multiple 0805CS-121XJBC 0805CS-111XJBC 9602-1111-018 960685 Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854668 70 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854668 70 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-53A Dimensions: 13.30 x 6.50 x 1.75 mm SAWTEK 854668 JJJYHH ID Dot Date Code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating 1.75 NOM. 1.96 MAX. All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 13.3 The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year (1 digit), and HH = hour (2 digits) 2.54 2.18 6.50 2.54 1.17 x 3.76 0.79 1.50 Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters 2.7 ID dot 24.8 O330 Section A-A 0.3 4.0 2.0 O1.5 A 1.75 11.5 O102 Direction of travel O20.2 O13.0 13.9 24 2.0 2.3 Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - 7.1 12.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854668 70 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 2 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes 3800 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: C Value: Passes 1100 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev A 5/10/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)