precision metal film resistor SIP networks EU features * * * * * * Custom design network Ultra-precision performance for precision analog circuits Tolerance to 0.1%, matching to 0.05% T.C.R. to 25ppm/C, tracking to 2ppm/C Marking: Black body color with laser marking Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. dimensions and construction L D Type L (max.) MRPL03 h MRPA03 H .335 (8.5) Dimensions inches (mm) D (max.) P H .098 (2.5) .100.008 (2.540.2) B h (max.) .256 (6.5) .118.02 (3.00.5) .335 (8.5) .01.02 (0.250.5) P P x No. of Pins ordering information New Part # MRP L03 Type Size L03 A03 E A D 103/103 T.C.R. (ppm/C) E: 25 C: 50 T.C.R. Tracking A: 2 Y: 5 T: 10 Termination Material D: SnAgCu Resistance Value 3 significant figures/ 3 significant figures Tolerance B: 0.1% C: 0.25% D: 0.5% F: 1.0% custom circuit ordering information New Part # MRP Type A Tolerance Ratio E: 0.025% A: 0.05% B: 0.1% C: 0.25% D: 0.5% KxxxxD Custom Code Factory will assign applications and ratings Ratings Type Power Rating (mW) Element Package Absolute T.C.R. T.C.R. Tracking Resistance Resistance Range* Tolerance Maximum Working Voltage Maximum Overload Voltage Rated Operating Ambient Temperature Temperature Range A: 2 B: 0.1% (R1/R210) C: 0.25% -55C to 100 200 50-100k D: 0.5% 100V 200V +70C Y: 5 +125C MRPA03 T: 10 F: 1% * Resistance combination for R1, R2 is standardized to 200/20k, 1k/1k, 1k/2k, 1k/4k, 1k/9k, 1k/10k, 1k/20k, 10k/10k, 10k/100k, 50k/50k, 100k/100k MRPL03 E: 25 C: 50 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/21/11 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 97 resistors MRP resistors MRP precision metal film resistor SIP networks applications and ratings (continued) Resistance Range Resistance Ratio Tolerance Absolute Resistance Tolerance E: 0.025% A: 0.025% B: 0.1% C: 0.25% D: 0.5% B: 0.1% 50 - 100k 50 - 100k 50 - 100k --- --- C: 0.25% 50 - 100k 50 - 100k 50 - 100k 50 - 100k --- D: 0.5% 50 - 100k 50 - 100k 50 - 100k 50 - 100k 50 - 100k F: 1% 50 - 100k 50 - 100k 50 - 100k 50 - 100k 50 - 100k 100 max. 100 max. 150 max. 150 max. 150 max. R1/R2 Relative Resistance Ratio standard circuit schematic R1 R2 custom circuit schematics X W V Z environmental applications Derating Curve 100 (Examples only. Contact factory for other custom layout requests.) % Rated Power 80 60 40 20 0 -60 -40 -55 -20 0 80 70 Ambient Temperature (C) 20 40 60 100 120 140 125 Performance Characteristics Parameter Resistance T.C.R. Overload (Short Time) Resistance to Soldering Heat Rapid Change of Temperature Moisture Resistance Endurance at 70C Insulation Resistance Requirement Within specified tolerance Within specified T.C.R. 0.05% 0.1% 0.1% 0.1% 0.1% No abnormality in outer coating and markings 10,000M or above Withstanding Voltage 0.5% Resistance to Solvents Test Method 25C +25C/+65C Rated voltage x 2.5 or max. overload voltage, whichever is lower, 5 seconds +350C 10C, 3.5 0.5 seconds -55 +0/-5C (30 min.), +125 +3/-0C (30 min.) 5 cycles 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Soaking in 2-propanol of +20C ~ +25C for 180 seconds 10 seconds 500V (d.c.) for 1 minute between terminals and coatings 500V (a.c.) for 1 minute between terminals and coatings Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 98 12/28/10 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com