NOTES: 1. MATERIALS AND FINISHES: BODY & COUPLING NUT 4. PACKAGING: - BRASS, NICKEL PLATING INSULATOR & INSULATOR DISC - PTFE, NATURAL CONTACT - BRASS, GOLD PLATING GASKETS - SILICONE RUBBER, RED 3. RETAINING RING - STAINLESS STEEL, NATURAL A. FERRULE - COPPER, NICKEL PLATING B HEAT SHRINK TUBING - POLYOLEFIN, BLACK C. D 2. ELECTRICAL: A. IMPEDANCE: 50 OHM E B. FREQUENCY RANGE: DC - 8 GHz F C. VSWR: 1.20 MAX. G 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65C TO +165C [?> shows CABLE ENTRY DIMENSIONS. INTERFACE PER MIL-STD-348 SERIES: SMA PLUG f \ A. B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 901-10660 DATE CODE" QUANTITY: SINGLE PACK CABLE ASSEMBLY INSTRUCTIONS: TRIM CABLE AS SHOWN. . SLIDE HEAT SHRINK TUBING, SOLDER CABLE CENTER CONDUCTOR TO CONTACT. . INSERT CABLE, UNTIL IT BOTTOMS, WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL. . CRIMP FERRULE OVER BRAID WITH APPLY HEAT SHRINK TUBING OVER FERRULE. . HEAT SHRINK TUBING SHOULD FULLY (360) COVER THE BUMP ON BODY AND END WITHIN AREA "A". 6. ADHESIVE LINED HEAT SHRINK TUBE IS INCLUDED 23,22 REF [.914] rm 8,4. REF > AREA "A" [. 331] 1.50 MAX. [.059] | FROM BODY TO HST 8.00 MM WRENCH 8,714 REF [.344] TYP(2) | YY 18 5/16" WRENCH TYP(2) .213" HEX DIE. THIRD ANGLE PROJ. (NOT SHOWN). FERRULE AND INSULATOR DISC ONTO CABLE. DIE CENTE [ @ 4 REVISIONS REV DESCRIPTION DATE ECN APPR A RELEASE TO MFG, 17-Oct-19 13304 KR | ,2 |g 8,5 _ [.047] [.335] LECTRIC & FOIL BRAID 2,9 098] SCALE 2.000 R CONDUCTOR 0,2 x45 . 008] RECOMMENDED CABLE STRIPPING_ DIMENSIONS Di,2 | D1, 18 05,33 [.047] [.046] [.210] \ owner INSULATOR DISC FERRULE CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: MATERIAL DRAWN DATE TITLE <o.5mm = 0.5 - 6mm 6 - 30mm 30 - 120mm ANGLES Wiki 5-Nov-19 Amp henol RF + 0.05mm 0. Imm +0. 2mm + 0.3mm | SEE NOTES ov SMA STR PLUG IP 67 NOTICE - These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE FOR LMR 200 CABLE property of Amphenol corp. (2) must be returned upon request; and (3) are REF ERENCE STAR 12-Dec-19 www.amphenolrf.com confidential and not to be disclosed to any person other than those to whom they ee are given by Amphenol Corp. the furnishing of these drawings, specifications, or |FAR# 8898 PP T . other data by Amphenol Corp., or to any other person to anyone for any purpose is APPROVED DATE DRAWING NO. 90 | 10660 not to be regarded by implication or otherwise in any manner licensing, granting |REF: 901-10639 STAR 12-Dec-19 SCALE: 6.8:1.0 | SHEET 2 OF 2 ITEM NO 901-10660 rights to permitting such holder or any other person to manufacture, use or sell : . - any product, process or design, patented or otherwise, that may in any way be CONFIGURATION LEVEL: In Work CAD FILE DWG SIZE REV related to or disclosed by said drawings, specifications, or other data. FINISH B A PART NO. 901-10660