SPEC NO: DSAD0620 REV NO: V.11B DATE: APR/03/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003769
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2.Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
L-36BGD Green (GaP) Green Diffused 12 25 60°
Iv (mcd)
V= 9V
Symbol Parameter Device Min. Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 565 nm
λD Dominant Wavelength Green 568 nm
Δλ1/2 Spectral Line Half-width Green 30 nm
IF Forward Current Green 8 22 mA Min:VF=3.5V
Typ:VF=5V
ISON Supply Current Green 8 mA VF=3.5V
ISON Supply Current Green 44 mA VF=14V
f Blink Frequency Green 1.5 3 Hz VF=3.5V~14V
Parameter Green Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Note:
1. Wavelength value is traceable to the CIE127-2007 compliant national standards.