GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 105
1 x 105 at 10A ,250VAC Res.
10ms at nominal coil voltage
4ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
5000Vrms contact to coil
2500Vrms between open contacts
3000Vrms between contact sets
1000 megohms min. at 20°C, 500VDC,
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
at nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
0.062" (1.5mm) DA at 10–55 Hz
10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
Approx. 18 grams
CONTACTS
Arrangement DPST (2 Form A)
Ratings Resistive load:
Max. switched power: 240W or 2500VA
Max. switched current: 12A
Max. switched voltage: 250VDC* or 277VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
TÜV
10A at 250VAC, 100k cycles [1]
12A at 277VAC, resistive, 70°C, 80K cycles [2]
1/3HP at 125VAC [2]
3/4HP at 250VAC [2]
TV-3 at 125VAC, 25k cycles [1]
12A at 250VAC, resistive, 70°C, 10k cycles [2][3]
10A at 250VAC, resistive, 70°C, 30k cycles [1][2][3]
10A at 30VAC, resistive, 70°C, 10k cycles [1]
Material Silver cadmium oxide [1], Silver tin oxide [2],
Silver nickel [3] , Gold plating available
Resistance < 50 milliohms initially
(24V, 1A voltage drop method)
12A DPST MINIATURE
POWER RELAY
FEATURES
Dielectric strength 5000Vrms
1.5mm contact gap (2.0mm contact gap available)
•Epoxy sealed version available
•
12 Amp switching — double pole contacts
Isolation spacing greater than 8mm
UL Class B insulation system, Class F available
•UL, CUR file E44211
•TÜV file R50129285
COIL
Power
At Pickup Voltage 450mW
(typical)
Max. Continuous
Dissipation
Temperature Rise
2.0W at 20°C (68°F) ambient
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/15/19
40°C (83°F) at nominal coil voltage