DATA SH EET
Product specification
Supersedes data of 7th June 1999
File under Advanced Ceramics and Modules, ACM2
1999 Dec 06
ADVANCED CERAMICS AND MODULES
Class 2, X7R 16/25/50/100/200
and 500 V
Noble Metal Electrode
Surface mount ceramic
multilayer capacitors
1999 Dec 06 2
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
FEATURES
•Seven standard sizes
•High capacitance per unit volume
•Supplied in tape on reel or in bulk
case
•NiSn terminations (AgPd on
request).
APPLICATIONS
•Consumer electronics, for
example:
– Tuners
– Television receivers
– Video recorders
– All types of cameras
•Telecommunications
•Automotive
•Data processing.
DESCRIPTION
The capacitor consists of a
rectangularblockofceramicdielectric
in which a number of interleaved
precious metal electrodes are
contained. This structure gives rise to
a high capacitance per unit volume.
Theinnerelectrodesareconnectedto
the two terminations, either by silver
palladium (AgPd) alloy in the ratio
65 : 35, or silver dipped with a barrier
layer of plated nickel and finally
covered with a layer of plated tin
(NiSn). A cross section of the
structure is shown in Fig.1.
QUICK REFERENCE DATA
Notes
1. Non E12 values are available on request.
2. Also applicable for applications up to 63 V.
DESCRIPTION VALUE
Rated voltage UR (DC) 16 V, 25 V, 50 V, 100 V,
200 V and 500 V (IEC)
Capacitance range (E12 series);
note 1:
16 V 4.7 nF to 100 nF
25 V 3.3 nF to 220 nF
50 V; note 2 100 pF to 470 nF
100 V 180 pF to 330 nF
200 V 180 pF to 120 nF
500 V 470 pF to 15 nF
Tolerance on capacitance ±20%; ±10%; ±5%
Test voltage (DC) for 1 minute:
16 V, 25 V, 50 V and 100 V 2.5 ×UR
200 V 3 ×UR
500 V 2 ×UR
Sectional specifications IEC 60384-10, second edition 1989-04;
also based on CECC 32 100
Detailed specification based on CECC 32 101-801
Climatic category (IEC 60068) 55/125/56
MLB457
,
,
terminations
electrodes
ceramic material
,
,
Fig.1 Construction of a ceramic multilayer capacitor.
1999 Dec 06 3
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
MECHANICAL DATA
Physical dimensions
Table 1 Capacitor dimensions
CASE SIZE L1WTL
2and L3L4
MIN.
MIN. MAX. MIN. MAX.
Dimensions in millimetres
0402 1.0 ±0.05 0.5 ±0.05 0.45 0.55 0.20 0.30 0.40
0603 1.6 ±0.10 0.8 ±0.07 0.73 0.87 0.25 0.65 0.40
0805 2.0 ±0.10 1.25 ±0.10 0.50 1.35 0.25 0.75 0.55
1206 3.2 ±0.15 1.6 ±0.15 0.50 1.75 0.25 0.75 1.40
1210 3.2 ±0.20 2.5 ±0.20 0.50 1.80 0.25 0.75 1.40
1812 4.5 ±0.20 3.2 ±0.20 0.50 1.80 0.25 0.75 2.20
2220 5.7 ±0.20 5.0 ±0.20 0.50 1.80 0.25 0.75 2.90
Dimensions in inches
0402 0.040 ±0.002 0.020 ±0.002 0.018 0.022 0.008 0.012 0.016
0603 0.063 ±0.004 0.032 ±0.003 0.029 0.035 0.010 0.026 0.016
0805 0.079 ±0.004 0.049 ±0.004 0.020 0.053 0.010 0.030 0.022
1206 0.126 ±0.006 0.063 ±0.006 0.020 0.069 0.010 0.030 0.056
1210 0.126 ±0.008 0.098 ±0.008 0.020 0.072 0.010 0.030 0.056
1812 0.177 ±0.008 0.126 ±0.008 0.020 0.072 0.010 0.030 0.088
2220 0.224 ±0.008 0.197 ±0.008 0.020 0.072 0.010 0.030 0.114
MBB211
T
L4
L1
L2L3
W
Fig.2 Component outline.
For dimensions see Table 1.
1999 Dec 06 4
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16 V and 25 V
Noble Metal Electrode
SELECTION CHART FOR 16 V AND 25 V
Thickness classification and packaging quantities
C
(nF)
LAST
TWO DIGITS
OF 12NC
16 V 25 V
0402 0603 0805 1206 0402 0603 0805 1206 1210
3.3 29
3.9 31 0.5 ±0.05
4.7 32
5.6 33
6.8 34
8.2 35
10 36 0.5 ±0.05
12 37
15 38 0.8 ±0.07
18 39 0.6 ±0.1
22 41
27 42
33 43
39 44
47 45 0.8 ±0.07
56 46 0.6 ±0.1 0.85 ±0.1
68 47
82 48
100 49
120 51
150 52 0.85 ±0.1 0.85 ±0.1
180 53
220 54
270 55 0.85 ±0.1 1.15 ±0.1 0.5 to 1.0
330 56
390 57 1.25 ±0.1
470 58 0.9 to 1.3
560 59
680 61 1.15 ±0.1 Values in shaded cells indicate thickness classification.
820 62
1000 63
THICKNESS
CLASSIFICATION
(mm)
8 mm TAPE WIDTH
AMOUNT PER REEL AMOUNT
PER BULK CASE
∅180 mm; 7" ∅330 mm; 13"
PAPER BLISTER PAPER BLISTER 0402 0603 0805
0.5 ±0.05 10000 −50000 −50000 −−
0.6 ±0.1 4000 −20000 −−−10000
0.85 ±0.1 4000 −15000 −−−8000
0.5 to 1.0 −4000 −10000 −−−
0.8 ±0.07 4000 −15000 −−15000 −
0.9 to 1.3 −3000 −10000 −−−
1.15 ±0.1 −3000 −10000 −−−
1.25 ±0.1 −3000 −10000 −−5000
1999 Dec 06 5
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16 V and 25 V
Noble Metal Electrode
ORDERING INFORMATION FOR 16 V AND 25 V
Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC.
Clear text code
Example: 08052R104K8BB00
SIZE
CODE TEMP.
CHAR. CAPACITANCE TOL. VOLTAGE TERMINATION PACKAGING MARKING SERIES
0402
0603
0805
1206
1210
2R = X7R 104 = 100000 pF;
the third digit
signifies the
multiplying factor:
2=×100
3=×1000
4=×10000
5=×100000
J=±5%
K=±10%
M=±20%
7 = 16 V
8 = 25 V
B = Ni-barrier 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking
2 = 2-character
marking in North
America only
0 = conv.
ceramic
Ordering code 12NC
handbook, full pagewidth
2 2 X X X X X X 6 X X X
Carrier type
22
38
54
blister
paper
bulk
Rated voltage - Termination
78
91 16 V; Ni-barrier
25 V; Ni-barrier
Size
7
6
0
1
2
0402
0603
0805
1206
1210
Capacitance value(1)
Tolerance
5
6
7
±5%
±10%
±20%
Packaging(2)
1
5
4
reel: ∅180 mm; 7"
reel: ∅330 mm; 13"
bulk case
CCA611
(1) Refer to chapter “Selection chart for 16 V and 25 V”.
(2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”.
1999 Dec 06 6
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 50 V
Noble Metal Electrode
SELECTION CHART FOR 50 V
C
(pF)
LAST
TWO DIGITS
OF 12NC
50 V
0402 0603 0805 1206 1210 1812 2220
100 01
120 02
150 03
180 04
220 05
270 06
330 07
390 08
470 09
560 11 0.5 ±0.05
680 12
820 13
1000 14
1200 15 0.8 ±0.07
1500 16
1800 17 0.6 ±0.1
2200 18
2700 19
3300 21
3900 22
4700 23
5600 24
6800 25 0.85 ±0.1
8200 26
10000 27
12000 28
15000 29
18000 31
22000 32
27000 33
33000 34 0.5 to 1.0
39000 35 0.85 ±0.1
47000 36
56000 37
68000 38
82000 39 1.25 ±0.1
100000 41
120000 42
150000 43
180000 44 1.15 ±0.1 0.9 to 1.3 0.5 to 1.0
220000 45
270000 46
330000 47
390000 48 0.5 to 1.0
470000 49 0.9 to 1.3
560000 51
680000 52 Values in shaded cells indicate thickness classification.
820000 53
1000000 54 0.9 to 1.3
1999 Dec 06 7
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 50 V
Noble Metal Electrode
Thickness classification and packaging quantities
ORDERING INFORMATION FOR 50 V
Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC.
Clear text code
EXAMPLE: 08052R104K9BB00
THICKNESS
CLASSIFICATION
(mm)
8 mm TAPE WIDTH
AMOUNT PER REEL 12 mm TAPE WIDTH
AMOUNT PER REEL AMOUNT
PER BULK CASE
∅180 mm; 7" ∅330 mm; 13" ∅180 mm; 7" BLISTER
PAPER BLISTER PAPER BLISTER 1812 2220 0402 0603 0805
0.5 ±0.05 10000 −50000 −−−50000 −−
0.6 ±0.1 4000 −20000 −−−−−10000
0.85 ±0.1 4000 −15000 −−−−−8000
0.5 to 1.0 −4000 −10000 2000 1500 −−−
0.8 ±0.07 4000 −15000 −−−−15000 −
0.9 to 1.3 −3000 −10000 1500 1500 −−−
1.15 ±0.1 −3000 −10000 −−−−−
1.25 ±0.1 −3000 −10000 −−−−5000
SIZE
CODE TEMP.
CHAR. CAPACITANCE TOL. VOLTAGE TERMINATION PACKAGING MARKING SERIES
0402
0603
0805
1206
1210
1812
2220
2R = X7R 104 = 100000 pF;
the third digit
signifies the
multiplying factor:
1=×10
2=×100
3=×1000
4=×10000
5=×100000
J=±5%
K=±10%
M=±20%
9 = 50 V B = Ni-barrier
A = AgPd
(2220 only)
2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking
2 = 2-character
marking in North
America only
0 = conv.
ceramic
Ordering code 12NC
handbook, full pagewidth
2 2 X X X X X X 6 X X X
Carrier type
22
38
54
blister
paper
bulk
Rated voltage - Termination
58
59 50 V; Ni-barrier
50 V; AgPd (2220 only)
Size
7
6
0
1
2
4
5
0402
0603
0805
1206
1210
1812
2220
Capacitance value(1)
Tolerance
5
6
7
±5%
±10%
±20%
Packaging(2)
1
5
4
reel: ∅180 mm; 7"
reel: ∅330 mm; 13"
bulk case
CCA612
(1) Refer to chapter “Selection chart for 50 V”.
(2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”.
1999 Dec 06 8
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 100 V, 200 V and 500 V
Noble Metal Electrode
SELECTION CHART FOR 100 V, 200 V AND 500 V
C
(pF)
LAST
TWO DIGITS
OF 12NC
100 V 200 V 500 V
0805 1206 1210 1812 0805 1206 1210 1812 1206 1210 1812
180 13
220 14
270 15
330 16
390 17
470 18
560 19
680 21
820 22
1000 23 0.85 ±0.1 1.15 ±0.1
1200 24
1500 25 0.6 ±0.1
1800 26
2200 27
2700 28
3300 29 0.85 ±0.1 0.85 ±0.1
3900 31 0.9 to 1.3
4700 32
5600 33
6800 34 1.25 ±0.1 1.2 to 1.75
8200 35
10000 36
12000 37 0.9 to 1.3
15000 38
18000 39 0.85 ±0.1
22000 41 1.15 ±0.1
27000 42 0.8 to 1.0
33000 43
39000 44
47000 45 0.9 to 1.3
56000 46 0.5 to 1.0
68000 47 0.5 to 1.0
82000 48 1.15 ±0.1
100000 49 0.9 to 1.3
120000 51 0.9 to 1.3
150000 52 0.5 to 1.0
180000 53
220000 54 Values in shaded cells indicate thickness classification.
270000 55 0.9 to 1.3
330000 56
1999 Dec 06 9
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 100 V, 200 V and 500 V
Noble Metal Electrode
Thickness classification and packaging quantities
ORDERING INFORMATION FOR 100 V, 200 V AND 500 V
Components may be ordered by using either a simple 15-digit clear text code or Philips unique 12NC.
Clear text code
Example: 18122R104KBBB00
THICKNESS
CLASSIFICATION
(mm)
8 mm TAPE WIDTH
AMOUNT PER REEL 12 mm TAPE WIDTH
AMOUNT PER REEL AMOUNT
PER BULK CASE
∅180 mm; 7" ∅330 mm; 13" ∅180 mm; 7" BLISTER
PAPER BLISTER PAPER BLISTER 1812 0805
0.6 ±0.1 4000 −20000 −− 10000
0.85 ±0.1 4000 −15000 −− 8000
0.8 to 1.0 −4000 −10000 −−
0.5 to 1.0 −4000 −10000 2000 −
0.9 to 1.3 −3000 −10000 1500 −
1.15 ±0.1 −3000 −10000 −−
1.25 ±0.1 −3000 −10000 −5000
1.2 to 1.75 −2500 −10000 −−
SIZE
CODE TEMP.
CHAR. CAPACITANCE TOL. VOLTAGE TERMINATION PACKAGING MARKING SERIES
0805
1206
1210
1812
2R = X7R 104 = 100000 pF;
the third digit
signifies the
multiplying factor:
1=×10
2=×100
3=×1000
4=×10000
J=±5%
K=±10%
M=±20%
0 = 100 V
B = 200 V
D = 500 V
B = Ni-barrier 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking
2 = 2-character
marking in North
America only
0 = conv.
ceramic
Ordering code 12NC
handbook, full pagewidth
2 2 X X X X X X 6 X X X
Carrier type
22
38
54
blister
paper
bulk
Rated voltage - Termination
60
93
97
100 V; Ni-barrier
200 V; Ni-barrier
500 V; Ni-barrier
Size
0
1
2
4
0805
1206
1210
1812
Capacitance value(1)
Tolerance
5
6
7
±5%
±10%
±20%
Packaging(2)
1
5
4
reel: ∅180 mm; 7"
reel: ∅330 mm; 13"
bulk case
CCA613
(1) Refer to chapter “Selection chart for 100 V, 200 V and 500 V”.
(2) Amount on reel depends on thickness classification, see section “Thickness classification and packaging quantities”.
1999 Dec 06 10
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
ELECTRICAL CHARACTERISTICS
Class 2 capacitors; X7R dielectric; AgPd and NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1°C, an atmospheric pressure of
86 to 106 kPa, and a relative humidity of 63 to 67%.
Notes
1. Measured at 1 V, 1 kHz, using a four-gauge method.
2. Tolerance of ±1% available on request.
DESCRIPTION VALUE
Capacitance range (E12 series); note 1 100 pF to 100 nF
Tolerance on capacitance after 1000 hours ±20%; ±10%; ±5%; note 2
Tan δ; note 1 ≤2.5%; 16 V range ≤3.5%
Insulation resistance after 1 minute at UR (DC):
C≤10 nF Rins >100 GΩ
C>10 nF Rins ×C>1000 seconds
Maximum capacitance change as a function of temperature
(for typical values see Fig.3) ±15%
Ageing typical 1% per time decade
Fig.3 Typicalcapacitance change as
a function of temperature.
handboo, halfpage
15
5
−15
MGA488 - 1
−40 0 40 80 120
T (
o
C)
10
−10
∆C
C
(%)
−5
0
Fig.4 Typical tan δ as a function of temperature.
handbook, halfpage
600
400
200
0
MEA611 - 1
−40 0 40 80 120
T (oC)
tan δ
(× 10
−4
)
(1)
(2)
(3)
(4)
Curve 1 = 16 V product.
Curve 2 = 25 V product.
Curve 3 = 50 V and 100 V products.
Curve 4 = 200 V and 500 V products.
1999 Dec 06 11
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
Fig.5 Typicalcapacitancechangewithrespect
to the capacitance at 1 V as a function of
DC voltage at 20 °C.
0102030
MGA448 - 2
VDC (V)
0
−50
−10
−20
−30
−40
C
(%)
∆C
16 V product
25 V product
Fig.6 Typicalcapacitancechangewithrespect
tothecapacitance at 1 V as a function of
DC voltage at 20 °C.
0
0204060VDC (V)
CCA049
−80
−60
−40
−20
80 100
100 V product
50 V product
C
(%)
∆C
Fig.7 Typicalcapacitancechangewithrespect
tothecapacitance at 1 V as a functionof
DC voltage at 20 °C.
0 100 200 400 500
0
−100
−20
MGA446 - 1
300
−40
−60
VDC (V)
C
(%)
∆C
−80
500 V product
200 V product
1999 Dec 06 12
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Application information
Where application information is given, it is advisory and does not form part of the specification.
1999 Dec 06 13
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
NOTES
1999 Dec 06 14
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
NOTES
1999 Dec 06 15
Philips Components Product specification
Surface mount ceramic
multilayer capacitors Class 2, X7R 16/25/50/100/200 and 500 V
Noble Metal Electrode
NOTES
PhilipsComponents–aworldwidecompany
Australia: Philips Components Pty Ltd., HOMEBUSH,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
Austria: Österreichische Philips Industrie GmbH, WIEN,
Tel. +43 1 60 101 12 41, Fax. +43 1 60 101 12 11
Belarus: Philips Office Belarus, MINSK,
Tel. +375 172 200 924/733, Fax. +375 172 200 773
Benelux: Philips Components B.V., EINDHOVEN, NL,
Tel. +31 40 25 90 772, Fax. +31 40 25 90 777
Brazil: Philips Components, SÃO PAULO,
Tel. +55 11 821 2333, Fax. +55 11 829 1849
Canada: Philips Electronics Ltd., SCARBOROUGH,
Tel. +1 416 292 5161, Fax. +1 416 754 6248
China: Philips Company, SHANGHAI,
Tel. +86 21 6354 1088, Fax. +86 21 6354 1060
Denmark: Philips Components A/S, COPENHAGEN V,
Tel. +45 3329 3333, Fax. +45 3329 3905
Finland: Philips Components, ESPOO,
Tel. +358 9 615 800, Fax. +358 9 615 80510
France: Philips Composants, SURESNES,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6493
Germany: Philips Components GmbH, HAMBURG,
Tel. +49 40 2489-0, Fax. +49 40 2489 1400
Hong Kong: Philips Hong Kong, KOWLOON,
Tel. +852 2784 3000, Fax. +852 2784 3003
India: Philips India Ltd., MUMBAI,
Tel. +91 22 4930 311, Fax. +91 22 4930 966/4950 304
Indonesia: P.T. Philips Development Corp., JAKARTA,
Tel. +62 21 794 0040, Fax. +62 21 794 0080
Ireland: Philips Electronics (Ireland) Ltd., DUBLIN,
Tel. +353 1 7640 203, Fax. +353 1 7640 210
Israel: Rapac Electronics Ltd., TEL AVIV,
Tel. +972 3 6450 444, Fax. +972 3 6491 007
Italy: Philips Components S.r.l., MILANO,
Tel. +39 2 6752 2531, Fax. +39 2 6752 2557
Japan: Philips Japan Ltd., TOKYO,
Tel. +81 3 3740 5135, Fax. +81 3 3740 5035
Korea (Republic of):Philips Electronics (Korea) Ltd., SEOUL,
Tel. +82 2 709 1472, Fax. +82 2 709 1480
Malaysia: Philips Malaysia SDN Berhad,
Components Division, PULAU PINANG,
Tel. +60 3 750 5213, Fax. +60 3 757 4880
Mexico: Philips Components, EL PASO, U.S.A.,
Tel. +52 915 772 4020, Fax. +52 915 772 4332
New Zealand: Philips New Zealand Ltd., AUCKLAND,
Tel. +64 9 815 4000, Fax. +64 9 849 7811
Norway: Philips Components, STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI,
Tel. +92 21 587 4641-49, Fax. +92 21 577 035/+92 21 587 4546
Philippines: Philips Semiconductors Philippines Inc.,
METRO MANILA, Tel. +63 2 816 6345, Fax. +63 2 817 3474
Poland: Philips Poland Sp. z.o.o., WARSZAWA,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: Philips Portuguesa S.A.,
Philips Components: LINDA-A-VELHA,
Tel. +351 1 416 3160/416 3333, Fax. +351 1 416 3174/416 3366
Russia: Philips Russia, MOSCOW,
Tel. +7 95 755 6918, Fax. +7 95 755 6919
Singapore: Philips Singapore Pte Ltd., SINGAPORE,
Tel. +65 350 2000, Fax. +65 355 1758
South Africa: S.A. Philips Pty Ltd., JOHANNESBURG,
Tel. +27 11 470 5911, Fax. +27 11 470 5494
Spain: Philips Components, BARCELONA,
Tel. +34 93 301 63 12, Fax. +34 93 301 42 43
Sweden: Philips Components, STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
Switzerland: Philips Components AG, ZÜRICH,
Tel. +41 1 488 22 11, Fax. +41 1 481 7730
Taiwan: Philips Taiwan Ltd., TAIPEI,
Tel. +886 2 2134 2900, Fax. +886 2 2134 2929
Turkey: Türk Philips Ticaret A.S., UMRABIYE/ISTANBUL,
Tel. +90 216 522 18 00, Fax. +90 216 522 18 14
United Kingdom: Philips Components Ltd., DORKING,
Tel. +44 1306 512 000, Fax. +44 1306 512 345
United States:
• Philips Components, SAN JOSE, CA,
Tel. +1 408 570 5600, Fax. +1 408 570 5700
• Philips Display Components, ANN ARBOR, MI,
Tel. +1 734 996 9400, Fax. +1 734 761 2776
• Philips Discrete Ceramics, CHARLOTTE, NC,
Tel. +1 915 860 3267, Fax. +1 915 860 3270
• Philips Ferrite Ceramics, ROSWELL, GA,
Tel. +1 877 433 77483, Fax. +1 770 992 0725
Yugoslavia (Federal Republic of):Philips Components, BELGRADE,
Tel. +381 11 625 344 / +381 11 3341 299,Fax. +381 11 635 777
Internet:
• Discrete and Ferrite Ceramics:www.acm.components.philips.com
• Display Components:www.philipsdisplay.com
For all other countries apply to:
Philips Components, Building BAE-1, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31 40 27 22 599
COD33 © Philips Electronics N.V. 1999
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner.
The information presented in this document does not form part of any quotation or
contract, is believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or
intellectual property rights.
Printed in The Netherlands
041010/500/03/pp16 Date of release: 1999 Dec 06
Document order number: 9397 378 57011
