MCC 1N5913B THRU 1N5942B omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * * * * * * 1.5 Watt Zener Diode 3.3 to 51 Volts Wide Voltage Range Available Glass Package High Temp Soldering: 260C for 10 Seconds At Terminals Marking : Cathode band and type number Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Moisture Sensitivity Level 1 Maximum Ratings * * * * * DO-41G Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C 1.5 Watt DC Power Dissipation Power Derating: 12 mW/C above 75C Forward Voltage @ 200mA: 1.2 Volts Figure 1 - Typical Capacitance D 100 At zero volts At -2 Volts V R A pf Cathode Mark 10 B D 1 0 100 200 VZ C Typical Capacitance (pf) - versus - Zener voltage (VZ) Figure 2 - Derating Curve DIMENSIONS INCHES 2.0 MM DIM W 1.0 NOTE MIN MAX MIN MAX A ----- 0.177 ----- 4.50 B ----- 0.110 ----- 2.80 Diameter C 0.026 0 . 0 34 0.70 0.90 Diameter D 1.000 ----- 25.40 ----- 0 50 100 150 Temperature C Power Dissipation (mW) - Versus - Temperature C Note: 1. Lead in Glass Solder Exemption Applied, see EU Directive Annex 5. Revision: A www.mccsemi.com 1 of 3 2011/01/01 MCC 1N5913B thru 1N5942B Micro Commercial Components ELECTRICAL CHARACTERISTICS @25C MCC PART NUMBER ZENER VOLTAGE VZ TEST CURRENT IZT 1N5913B 1N5914B 1N5915B 1N5916B 1N5917B VOLTS 3.3 3.6 3.9 4.3 4.7 mA 113.6 104.2 96.1 87.2 79.8 1N5918B 1N5919B 1N5920B 1N5921B 1N5922B 1N5923B 1N5924B 1N5925B 1N5926B 1N5927B 1N5928B 1N5929B 1N5930B 1N5931B 1N5932B 1N5933B 1N5934B 1N5935B 1N5936B 1N5937B 1N5938B 1N5939B 1N5940B 1N5941B 1N5942B 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 MAXIMUM DYNAMIC IMPEDANCE ZZT @ IZT OHMS 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 KNEE CURRENT IZK KNEE IMPEDANCE ZZK mA 1.0 1.0 1.0 1.0 1.0 OHMS 500 500 500 500 500 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 MAXIMUM REVERSE CURRENT IR A 100 75 25 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 REVERSE VOLTAGE VR MAXIMUM DC CURRENT IZM VOLTS 1.0 1.0 1.0 1.0 1.5 mA 454 416 384 348 319 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 294 267 241 220 200 182 164 150 125 125 115 100 93 83 75 68 62 55 50 45 41 38 34 31 29 Note 1: No suffix indicates a 20% tolerance on nominal VZ, Suffix A denotes a 10% tolerance, B denotes a 5% tolerance, C denotes a 2%. o 2: Zener voltage(V Z ) measured at TL = 30 C. Voltage measurement to be performed 20 seconds after application of DC current. 3: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the DC Zener current(IZT or IZK) is superimposed on IZT or IZK. Revision: A www.mccsemi.com 2 of 3 2011/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 2.5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 3 of 3 2011/01/01 3