PLASTIC FILM CAPACITORS PL - Non-inductive construction - The more excellent permissible current characteristics than PC series at high frequency - Epoxy resin coating - Very low dissipation factor at high frequency - Applications : S correction of TV, charge and discharge use Non-Inductive Metallized Polypropylene Film Series item Characteristics Operating temperature range -40 ~ +85C Capacitance tolerance +5%(J), 10%(K) at 1kHz, 20C Dissipation factor 0.001 max. at 1kHz, 20C (0.008 max. at 10kHz 20C) Insulation resistance Cs 0.33F : 25000 MQ min., C>0.33eF : 7500 OF min. ~ Test voltage Rated voltage x 1.5 Rated voltagex1.75 Withstand voltage Terminal to terminal _ 60~65 s 1~5s | Terminal to coating 1-58 | @ DRAWING Unit : mm W max. T max. + . 6d+0.05 @ DIMENSIONS & PERMISSIBLE CURRENT wv 450VDC (2W) 630VDC (2) | Permissible DIMENSIONS (mm) Permissible DIMENSIONS (mm) \ current TO ~ Op a ee current | \, Code (Arms) T w of Pp od (Arms) T w | H p od eo 100kHz 100kHz 0.033 1.35 a5 | 135 | 155 | 100 | 08 0.039 1.46 90 | 135 | 163 | 100] 08 0.047 1.34 83 | 135 | 156 | 100 | O8 1.53 100 | 135 | 170 | 100 | 08 0.056 151 90 | 135 | 162 | 100 | 08 1.60 100 | 135 | 190 | 100 | 08 0.068 1.67 100 135 | 170 | 100 | o8 1.69 11.0 | 135 | 198 | 100 | 08 0.082 1.77 106 | 135 | 180 | 100 | 08 180 | 120 | 135 | 210 | 100] 08 0.1 1.90 120 | 135 | 190 | 100, 08 1.93 13.3) 135 | 220 | 1001 08 | 0.12 1.96 120 | 135 | 210 | 100 08 2.00 10.0 185 | 205 | 150. 08 0.15, 2.03 120) 135 | 210 | 100: 08 2.05 110 | 185 | 220 | 15.0 | 08 0.18 2.08 135 | 135 | 225 | 100 08 2.09 120) 185 | 230 | 150. 08 022 | 211 100 | 185 | 210 | 150. 08 213 135 | 185 | 245 | 150) 08 027 | 2022 110 185 (220 | 150 | O08 | 18.0 185 | 255 15.0 | 08 033 | 244 | 125 185 230 | 1501 08 2.49 ' 165 | 185 | 275 150 | 08 0.39 2.62 | 440 | 185 23.0 15.0 0.8 | (Applicable to taping of lead center spacing=7.5mm sid 047 | 281 | 155 185 245 15.0 o8 fo