NOTES: APH-SMAPMCXP REVISIONS . DRAWING NO. REV DESCRIPTION DATE ECO APPR 1. MATERIALS AND FINISHES: THIRD ANGLE PRO. @ & |A RELEASE TO MFG. 9/12/06 | 46264 | CPM/ BODY BRASS (ASTMB16 H02, C36000), GOLD PLATING CONTACT PIN BeCu, GOLD PLATING INSULATOR PTFE PER ASTM D 1710 OR EQUIV. 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC 6 GHz 3. MECHANICAL: A. TEMPERATURE RANGE: -65 C TO +165 C 4, PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, APHSMAPMCXP, AND DATE CODE ary o " oO oO 23.90 [.942] UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: | MATERIAL DRAWN TLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES C. McGRATH Amphenol +.015 (0,381 mm) +.005 (0,127 mm) +1 ENGINEER SMA MALE TO Amphenol Corporation . BARTHELMES RF/Microwave Operations NOTICE These drawings, specifications, or other data (1) are, and remain the REFERENCE APPROVED M CX M ALE Danbury, Conn. U.S.A. 06810 property of Amphenol Corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they O. BARTHELMES AD A PTE R are given by Amphenol Corp. The furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is SCALE: 2:1 SHEET OF not to be regarded by implication or otherwise in any manner licensing, granting ISSUE rights or permitting such holder or any other person to manufacture, use or sell any CODE ID DWG SIZE DRAWING NO. product, process or, Gesign, patented, or otherwise, that ray in any way be reloted tol cap FH: DEPT611\ASSY\APH\SMAPMCXP 74868 APHSMAP=MCXP | A