© Semiconductor Components Industries, LLC, 2015
March, 2015 − Rev. 14 1Publication Order Number:
MMSZ5221BT1/D
MMSZ52xxxT1G Series,
SZMMSZ52xxxT1G Series
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style. Zener voltage
in this series are specified with device junction in thermal equilibrium.
Features
500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 2.4 V to 110 V @ Thermal
Equilibrium*
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
General Purpose, Medium Current
ESD Rating of Class 3 (> 16 kV) per Human Body Model
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These are Pb−Free Devices*
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
MAXIMUM RATINGS
Rating Symbol Max Units
Total Power Dissipation on FR−5 Board,
(Note 1) @ TL = 75°C
Derated above 75°C
PD500
6.7 mW
mW/°C
Thermal Resistance, Junction−to−Ambient
(Note 2) RqJA 340 °C/W
Thermal Resistance, Junction−to−Lead
(Note 2) RqJL 150 °C/W
Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be af fected.
1. FR−5 = 3.5 X 1.5 inches, using the minimum recommended footprint.
2. Thermal Resistance measurement obtained via infrared Scan Method.
*For additional info on thermal equilibrium, please download, ON Semiconductor
TVS/Zener Theory and Design Considerations Handbook, HBD854/D.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Device Package Shipping
ORDERING INFORMATION
SOD−123
CASE 425
STYLE 1
1
Cathode 2
Anode
MARKING DIAGRAM
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 o
f
this data sheet.
DEVICE MARKING INFORMATION
For information on tape and reel specifications,
including part orientation and tape sizes, please
refer t o our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
MMSZ52xxBT1G,
SZMMSZ52xxBT1G SOD−123
(Pb−Free) 3,000 /
Tape & Reel
MMSZ52xxBT3G,
SZMMSZ52xxBT3G SOD−123
(Pb−Free) 10,000 /
Tape & Reel
www.onsemi.com
xx = Device Code (Refer to page 3)
M = Date Code
G= Pb−Free Package
(Note: Microdot may be in either location)
xx MG
G
1
MMSZ52xxCT1G,
SZMMSZ52xxCT1G SOD−123
(Pb−Free) 3,000 /
Tape & Reel
MMSZ52xxCT3G,
SZMMSZ52xxCT3G SOD−123
(Pb−Free) 10,000 /
Tape & Reel
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol Parameter
VZReverse Zener Voltage @ IZT
IZT Reverse Current
ZZT Maximum Zener Impedance @ IZT
IZK Reverse Current
ZZK Maximum Zener Impedance @ IZK
IRReverse Leakage Current @ VR
VRReverse Voltage
IFForward Current
VFForward Voltage @ IFZener Voltage Regulator
IF
V
I
IR
IZT
VR
VZVF
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
3
5% TOLERANCE FG ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Device* Device
Marking
Zener Voltage (Notes 3 and 4) Zener Impedance (Note 5) Leakage Cur-
rent
VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IR @ VR
Min Nom Max mA W W mA mAVolts
MMSZ5221BT1G C1 2.28 2.4 2.52 20 30 1200 0.25 100 1
MMSZ5222BT1G C2 2.38 2.5 2.63 20 30 1250 0.25 100 1
MMSZ5223BT1G C3 2.57 2.7 2.84 20 30 1300 0.25 75 1
MMSZ5224BT1G C4 2.66 2.8 2.94 20 30 1400 0.25 75 1
MMSZ5225BT1G C5 2.85 3.0 3.15 20 29 1600 0.25 50 1
MMSZ5226BT1G D1 3.14 3.3 3.47 20 28 1600 0.25 25 1
MMSZ5227BT1G D2 3.42 3.6 3.78 20 24 1700 0.25 15 1
MMSZ5228BT1G D3 3.71 3.9 4.10 20 23 1900 0.25 10 1
MMSZ5229BT1G D4 4.09 4.3 4.52 20 22 2000 0.25 5 1
MMSZ5230BT1G D5 4.47 4.7 4.94 20 19 1900 0.25 5 2
MMSZ5231BT1G E1 4.85 5.1 5.36 20 17 1600 0.25 5 2
MMSZ5232BT1G E2 5.32 5.6 5.88 20 11 1600 0.25 5 3
MMSZ5233BT1G E3 5.70 6.0 6.30 20 7 1600 0.25 5 3.5
MMSZ5234BT1G E4 5.89 6.2 6.51 20 7 1000 0.25 5 4
MMSZ5235BT1G E5 6.46 6.8 7.14 20 5 750 0.25 3 5
MMSZ5236BT1G F1 7.13 7.5 7.88 20 6 500 0.25 3 6
MMSZ5237BT1G F2 7.79 8.2 8.61 20 8 500 0.25 3 6.5
MMSZ5238BT1G F3 8.27 8.7 9.14 20 8 600 0.25 3 6.5
MMSZ5239BT1G F4 8.65 9.1 9.56 20 10 600 0.25 3 7
MMSZ5240BT1G F5 9.50 10 10.50 20 17 600 0.25 3 8
MMSZ5241BT1G H1 10.45 11 11.55 20 22 600 0.25 2 8.4
MMSZ5242BT1G/T3G H2 11.40 12 12.60 20 30 600 0.25 1 9.1
MMSZ5243BT1G H3 12.35 13 13.65 9.5 13 600 0.25 0.5 9.9
MMSZ5244BT1G H4 13.30 14 14.70 9.0 15 600 0.25 0.1 10
MMSZ5245BT1G H5 14.25 15 15.75 8.5 16 600 0.25 0.1 11
MMSZ5246BT1G J1 15.20 16 16.80 7.8 17 600 0.25 0.1 12
MMSZ5247BT1G J2 16.15 17 17.85 7.4 19 600 0.25 0.1 13
MMSZ5248BT1G J3 17.10 18 18.90 7.0 21 600 0.25 0.1 14
MMSZ5249BT1G J4 18.05 19 19.95 6.6 23 600 0.25 0.1 14
MMSZ5250BT1G J5 19.00 20 21.00 6.2 25 600 0.25 0.1 15
MMSZ5251BT1G K1 20.90 22 23.10 5.6 29 600 0.25 0.1 17
MMSZ5252BT1G K2 22.80 24 25.20 5.2 33 600 0.25 0.1 18
MMSZ5253BT1G K3 23.75 25 26.25 5.0 35 600 0.25 0.1 19
MMSZ5254BT1G K4 25.65 27 28.35 4.6 41 600 0.25 0.1 21
MMSZ5255BT1G K5 26.60 28 29.40 4.5 44 600 0.25 0.1 21
MMSZ5256BT1G M1 28.50 30 31.50 4.2 49 600 0.25 0.1 23
MMSZ5257BT1G M2 31.35 33 34.65 3.8 58 700 0.25 0.1 25
MMSZ5258BT1G/T3G M3 34.20 36 37.80 3.4 70 700 0.25 0.1 27
MMSZ5259BT1G M4 37.05 39 40.95 3.2 80 800 0.25 0.1 30
MMSZ5260BT1G M5 40.85 43 45.15 3.0 93 900 0.25 0.1 33
MMSZ5261BT1G N1 44.65 47 49.35 2.7 105 1000 0.25 0.1 36
MMSZ5262BT1G N2 48.45 51 53.55 2.5 125 1100 0.25 0.1 39
MMSZ5263BT1G N3 53.20 56 58.80 2.2 150 1300 0.25 0.1 43
MMSZ5264BT1G N4 57.00 60 63.00 2.1 170 1400 0.25 0.1 46
MMSZ5265BT1G N5 58.90 62 65.10 2.0 185 1400 0.25 0.1 47
MMSZ5266BT1G P1 64.60 68 71.40 1.8 230 1600 0.25 0.1 52
MMSZ5267BT1G P2 71.25 75 78.75 1.7 270 1700 0.25 0.1 56
MMSZ5268BT1G P3 77.90 82 86.10 1.5 330 2000 0.25 0.1 62
MMSZ5269BT1G P4 82.65 87 91.35 1.4 370 2200 0.25 0.1 68
MMSZ5270BT1G P5 86.45 91 95.55 1.4 400 2300 0.25 0.1 69
MMSZ5272BT1G/T3G R2 104.5 110 115.5 1.1 750 3000 0.25 0.1 84
3. “B” Suffix Type numbers shown have a standard tolerance of ±5% on the nominal Zener voltages.
4. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ±1°C.
5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied.
The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 kHz.
*Includes SZ-prefix devices where applicable.
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
4
2% TOLERANCE FG ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Device* Device
Marking
Zener Voltage (Notes 6 and 7) Zener Impedance (Note 8) Leakage Cur-
rent
VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IR @ VR
Min Nom Max mA W W mA mAVolts
MMSZ5226CT1G TD 3.234 3.3 3.366 20 28 1600 0.25 25 1
MMSZ5231CT1G TG 4.998 5.1 5.202 20 17 1600 0.25 5 2
MMSZ5232CT1G TH 5.488 5.6 5.712 20 11 1600 0.25 5 3
MMSZ5245CT1G TK 14.70 15 15.30 8.5 16 600 0.25 0.1 11
MMSZ5248CT1G TL 17.64 18 18.36 7.0 21 600 0.25 0.1 14
MMSZ5250CT1G TN 19.60 20 20.40 6.2 25 600 0.25 0.1 15
MMSZ5252CT1G TQ 23.52 24 24.48 5.2 33 600 0.25 0.1 18
MMSZ5256CT1G TW 29.40 30 30.60 4.2 49 600 0.25 0.1 23
MMSZ5258CT1G TX 35.28 36 36.72 3.4 70 700 0.25 0.1 27
6. “C” Suffix Type numbers shown have a standard tolerance of ±2% on the nominal Zener voltages.
7. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ±1°C.
8. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied.
The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 kHz.
*Includes SZ-prefix devices where applicable.
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
5
TYPICAL CHARACTERISTICS
VZ, NOMINAL ZENER VOLTAGE (V)
−3
−2
−1
0
1
2
3
4
5
6
7
8
12111098765432
Figure 1. Temperature Coefficients
(Temperature Range −55°C to +150°C)
TYPICAL TC VALUES
FOR MMSZ52xxBT1G SERIES,
SZMMSZ52xxBT1G SERIES
VZ @ IZT
1000
10
110 20
0
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 2. Temperature Coefficients
(Temperature Range −55°C to +150°C)
1.2
1.0
0.8
0.6
0.4
0.2
01501251007550250 T, TEMPERATURE (°C)
Figure 3. Steady State Power Derating
PD versus TA
PD versus TL
0.1 PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1 10 100 100
0
1000
100
10
1
RECTANGULAR
WAVEFORM, TA = 25°C
100
VZ, NOMINAL ZENER VOLTAGE
Figure 5. Effect of Zener Voltage on
Zener Impedance
101
1000
100
10
1
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IZ = 1 mA
5 mA
20 mA
VF, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
1
.2
1.11.00.90.80.70.60.50.4
1000
100
10
1
75 V (MMSZ5267BT1G)
91 V (MMSZ5270BT1G)
150°C75°C 25°C 0°C
qVZ, TEMPERATURE COEFFICIENT (mV/°C)
qVZ, TEMPERATURE COEFFICIENT (mV/°C)
Ppk, PEAK SURGE POWER (WATTS)
Z
ZT
, DYNAMIC IMPEDANCE (
W
)
IF, FORWARD CURRENT (mA)
100
100
TYPICAL TC VALUES
FOR MMSZ52xxBT1G SERIES,
SZMMSZ52xxBT1G SERIES
VZ @ IZT
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
6
TYPICAL CHARACTERISTICS
C, CAPACITANCE (pF)
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 7. Typical Capacitance
1000
100
10
1101
BIAS AT
50% OF VZ NOM
TA = 25°C
0 V BIAS
1 V BIAS
12
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.01 1086420
TA = 25°C
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.01 10 30 50 70 90
TA = 25°C
9
0
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 8. Typical Leakage Current
1000
100
10
1
0.1
0.01
0.001
0.0001
0.00001 80706050403020100
+150°C
+25°C
−55°C
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V) Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
IR, LEAKAGE CURRENT (mA)
IZ, ZENER CURRENT (mA)
I
Z
, ZENER CURRENT (mA)
Figure 11. SOD−123 (plastic) 500 Watt Device
PW, PULSE WIDTH (ms)
10K1K100101
0.970
0.975
0.985
0.995
1.000
1.005
1.015
VZ, ZENER VOLTAGE (NORMALIZED)
100K 1M
0.980
0.990
1.010
47 V
VZ = 3.0 V
91 V
MMSZ52xxxT1G Series, SZMMSZ52xxxT1G Series
www.onsemi.com
7
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
ÂÂÂÂ
ÂÂÂÂ
E
b
DA
L
C
1
2
A1
DIM MIN NOM MAX
MILLIMETERS INCHES
A0.94 1.17 1.35 0.037
A1 0.00 0.05 0.10 0.000
b0.51 0.61 0.71 0.020
c
1.60
0.15
0.055
D1.40 1.80
E2.54 2.69 2.84 0.100
---
3.68 0.140
L0.25
3.86
0.010
HE
0.046
0.002
0.024
0.063
0.106
0.145
0.053
0.004
0.028
0.071
0.112
0.152
MIN NOM MAX
3.56
HE
---
--- ---
0.006
--- ---
--- ---
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.22
0.048
ÉÉ
ÉÉ
ÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ǒmm
inchesǓ
SCALE 10:1
ÉÉ
ÉÉ
ÉÉ
q
--- ---
q00
10 10
°°° °
STYLE 1:
PIN 1. CATHODE
2. ANODE
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent− Marking.pdf. S CILLC reserves the r ight to make changes without f urther n otice to a ny products herein. S CILLC makes n o warranty, representat ion
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all l iabilit y, including without limit at ion s pecial, c onsequent ial o r incidental damages. “Typical” parameters which may be provided in S CI LLC d at a sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application b y c ust omer’s technical e xperts. SCILLC does n ot c onvey a ny license under its patent r ights n or the rights o f o thers. SCILLC products a re n ot d esigned, i ntended,
or authorized for use as c omponent s i n s yst ems i nt ended f or s urgic al i m plant i nt o the body, or other applications intended to support o r s ust ain life, o r for any other application in w hich
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC an d it s officers, em ployees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and r easonable a ttorney f ees a rising o ut of, directly o r i ndirectly, any c laim o f p ersonal i njury o r d eath a ssociated w ith such unintended o r u naut horized u se, e ven if such claim
alleges that SCILLC was negligent regarding the d esign or manufacture of the p art. SCILLC is a n Equal O pportunit y/Aff irmative A ction E mployer . T his l iterature i s subject t o all applicable
copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MMSZ5221BT1/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative