CERAMOS Lead (Pb) Free Product - RoHS Compliant LUW C9EN Released Besondere Merkmale * Gehausetyp: SMD Keramik Gehause mit diffusem Silikonverguss * Typischer Lichtstrom: 78 lm bei 500 mA * Besonderheit des Bauteils: hocheffiziente Lichtquelle bei geringem Platzbedarf * Farbort: x = 0,31, y = 0,32 nach CIE 1931 (wei) * typische Farbtemperatur: 6500 K * Abstrahlwinkel: Lambertscher Strahler 120 * Technologie: ThinGaN * optischer Wirkungsgrad: 43 lm/W bei 500 mA * Gruppierungsparameter: Lichtstrom, Farbort * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 4000/Rolle, o180 mm * ESD-Festigkeit: 2 kV nach JESD22-A114-D 8 kV nach IEC 61000-4-2, level 4 (contact discharge) * Erweiterte Korrosionsfestigkeit: Details siehe Seite 11 Features * package: SMD ceramic package with diffused silicone resin * typical Luminous Flux: 78 lm at 500 mA * feature of the device: high efficient lightsource at small dimensions * color coordinates: x = 0.31, y = 0.32 acc. to CIE 1931 (white) * typ. color temperature: 6500 K * viewing angle: Lambertian Emitter 120 * technology: ThinGaN * optical efficiency: 43 lm/W at 500 mA * grouping parameter: luminous flux, color coordinates * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 4000/reel, o180 mm * ESD-withstand voltage: 2 kV acc. to JESD22-A114-D 8 kV acc. to IEC 61000-4-2, level 4 (contact discharge). * Superior Corrosion Robustness: details see page 11 Anwendungen * Blitzlicht * Taschenlampe * Videoleuchte * Fassadenbeleuchtung im Innenbereich * Display Hinterleuchtung mit hohem Helligkeitsbedarf z. B. TFT Applications * camera flash light / strobe light * torch light * video light * indoor commercial and residential architectural lighting * display backlight where high brightness is required e.g. TFT 2012-03-07 1 LUW C9EN Released Bestellinformation Ordering Information Typ Type LUW C9EN-N4N6-EG Emissionsfarbe Lichtstrom1) Seite 18 Color of Emission Luminous Flux1) page 18 Luminous Intensity2) page 18 IF = 500 mA V(lm) IF = 500 mA IV (cd) white Lichtstarke Bestellnummer 2) Seite 18 75.0 ... 105.0 28 (typ.) Ordering Code Q65110A9846 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LUW C9EN-N4N6-EG bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen N4, N5 oder N6 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LUW C9EN-N4N6-EG bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -E, -F oder -G enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LUW C9EN-N4N6-EG means that only one group N4, N5 or N6 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LUW C9EN-N4N6-EG means that only 1 chromaticity coordinate group -E, -F or -G will be shippable (see page 5 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. 2012-03-07 2 LUW C9EN Released Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur (PC-Board FR4) Operating temperature range (PC board FR4) Top - 40 ... + 100 C Betriebstemperatur (Metallkernplatine) Operating temperature range (Metal core board) Top - 40 ... + 85 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj 175 C (min.) IF (max.) 20 500 mA mA mA Durchlassstrom Forward current (TS=25C) Stostrom Surge current t 50 ms, D = 0.016, TS=25C IFM 750 Sperrspannung Reverse voltage (TS=25C) VR not designed for V reverse operation 2012-03-07 3 LUW C9EN Released Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Symbol Symbol Farbkoordinate x nach CIE 19313) Seite 18 (typ.) 3) page 18 Chromaticity coordinate x acc. to CIE 1931 IF = 500 mA x 0.31 - Farbkoordinate y nach CIE 19313) Seite 18 (typ.) 3) page 18 Chromaticity coordinate y acc. to CIE 1931 IF = 500 mA y 0.32 - Abstrahlwinkel bei 50 % V (Vollwinkel) Viewing angle at 50 % V (typ.) 2 120 Grad deg. Durchlassspannung 4) Seite 18) Forward voltage4) page 18 IF = 500 mA (min.) (typ.) (max.) VF VF VF 2.8 3.5 3.8 V V V Sperrstrom Reverse current (max.) IR Warmewiderstand Thermal resistance Sperrschicht/Lotpad Junction/solder point Rth JS Rth JS (typ.) (max.) *Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-03-07 4 Wert Value Einheit Unit not designed for reverse operation A 32 40* K/W K/W LUW C9EN Released Farbortgruppen3) Seite 18 3) page 18 Chromaticity coordinate groups 0.44 Cy 0.43 0.42 0.9 0.41 520 530 Cy 0.8 0.40 540 510 0.39 550 0.7 0.6 0.4 580 590 600 610 620 630 E 0.3 490 0.36 0.35 F 0.34 + 0.33 0.2 480 470 460 450 0.1 0 0.37 570 500 0.5 G 0.38 560 0 0.32 E 0.31 0.30 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Cx 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.27 0.27 0.28 0.28 Cx OHA03750 Gruppe Group E F 2012-03-07 Cx Cy 0.319 0.317 0.302 Gruppe Group Cx Cy 0.350 0.405 0.282 0.347 0.373 0.292 0.316 0.337 0.352 0.310 0.352 0.328 0.387 - - 0.346 0.423 0.337 0.352 0.319 0.317 0.310 0.352 0.328 0.387 - - G 5 LUW C9EN Released Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group N4 N5 N6 Lichtstrom1) Seite 18 Luminous Flux1) page 18 V (lm) 75.0 ... 82.0 82.0 ... 97.0 97.0 ... 105.0 Lichtstarke2) Seite 18 Luminous Intensity2) page 18 IV (cd) 26.0 (typ.) 30.0 (typ.) 34.0 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus nur wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of only a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: N4-E Example: N4-E Helligkeitsgruppe Brightness Group Farbortgruppe Chromaticity Coordinate Group N4 E Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 2012-03-07 6 LUW C9EN Released Relative spektrale Emission2) Seite 18 Relative Spectral Emission2) page 18 V() = spektrale Augenempfindlichkeit / Standard eye response curve rel = f (); TS = 25 C; IF = 500 mA OHL13926 100 % rel 80 V 60 40 20 0 400 450 500 550 600 650 700 nm 750 Abstrahlcharakteristik2) Seite 18 Radiation Characteristic2) page 18 rel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-03-07 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LUW C9EN Released Durchlassstrom2) Seite 18 Forward Current2) page 18 IF = f (VF); TS = 25 C IF Relative Lichtstrom2) 5)1) Seite 18 Relative Luminous Flux2) 5)1) page 18 V/V(500 mA) = f (IF); TS = 25 C OHL04472 500 mA OHL04473 1.4 V V (500 mA) 400 1.0 300 0.8 0.6 200 0.4 100 0.2 0 2.6 2.8 3.0 3.2 3.4 3.6 0 100 V 4.0 Farbortverschiebung2) Seite 18 Chromaticity Coordinate Shift2) Seite 18 x, y = f (IF); TS = 25 C OHL04471 0.010 Cx, Cy 0.008 0.007 0.006 0.005 0.004 Cx Cy 0.003 0.002 0.001 0 100 200 300 400 mA 500 IF 2012-03-07 200 300 400 mA 500 IF VF 8 LUW C9EN Released Relative Vorwartsspannung2) Seite 18 Relative Forward Voltage2) Seite 18 VF = VF - VF(25 C) = f (Tj); IF = 500 mA VF Relative Lichtstrom2)1) Seite 18 Relative Luminous Flux2)1) page 18 V/V(25 C) = f (Tj); IF = 500 mA OHL04476 0.3 V OHL04475 1.2 V V (25 C) 0.2 0.1 0.8 0 0.6 -0.1 0.4 -0.2 -0.3 0.2 -0.4 -40 -20 0 20 40 60 80 0 -40 -20 0 C 120 Tj OHL04474 Cx, Cy 0.02 0.01 Cy 0 Cx -0.01 -0.02 -0.03 -40 -20 0 20 40 60 80 C 120 Tj 2012-03-07 C 120 Tj Farbortverschiebung2) Seite 18 Chromaticity Coordinate Shift2) Seite 18 x, y = f (Tj); IF = 500 mA 0.03 20 40 60 80 9 LUW C9EN Released Angestrebte mittlere Lebensdauer2) Seite 17 fur mittlere Helligkeitsgruppe Target median Lifetime2) page 17 for median Brightness Group Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS); on FR4-boards IF OHL04129 550 mA Bedingungen mittlere Lebensdauer Conditions median Lifetime IF = 250mA >100'000 450 400 350 TA = 25C 300 IF = 500 mA TA = 85C 250 * lifetime L50 / B50 >100'000 Einheit Unit Betriebsstunden operating hours Betriebsstunden operating hours 200 150 100 50 0 0 20 40 60 80 100 C 120 TS Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 85 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TS = 25 C 0.90 A IF OHL04130 t D = TP 0.90 A tP IF IF T 0.80 0.75 0.70 0.65 0.60 0.55 OHL04131 t D = TP tP IF T 0.80 D= 0.75 0.005 0.01 0.02 0.05 0.1 0.2 0.3 0.5 1 0.70 0.65 0.60 0.55 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.3 0.5 1 0.50 0.50 0.45 0.45 0.40 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.40 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2012-03-07 tp 10 LUW C9EN Released Mazeichnung5) Seite 18 Package Outlines5) page 18 Anm.: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschalten ist. Note: LED is protected by ESD device which is connected in parallel to LED-Chip. Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: 2012-03-07 Markierung mark 7.8 mg 11 LUW C9EN Released Gurtung / Polaritat und Lage6) Seite 18 Method of Taping / Polarity and Orientation6) page 18 2012-03-07 12 Verpackungseinheit 4000/Rolle, o180 mm Packing unit 4000/reel, o180 mm LUW C9EN Released Empfohlenes Lotpaddesign6) Seite 18 Recommended Solder Pad6) page 18 Reflow Loten Reflow Soldering 0.35 (0.014) 3 (0.118) 5.2 (0.205) 1.55 (0.061) 3 (0.118) 0.6 (0.024) 1.2 (0.047) OHLY2868 Hinweise zur Augensicherheit: Wegen der geplanten Streichung der LED aus der IEC 60825 erfolgt die Bewertung der Augensicherheit nach dem Standard CIE S009/E:2002 ("photobiological safety of lamps and lamp systems") Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LED die "low risk"- Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 100 s bezieht). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, konnen temporar eingeschranktes Sehvermogen und Nachbilder je nach Situation zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Eye safety Information: Due to the planned cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard CIE S009/E:2002 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "low risk" group (relating to devices in the visible spectrum with an exposure time of 100 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. 2012-03-07 13 LUW C9EN Released Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.1) (acc. to J-STD-020D.1) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2012-03-07 14 s 300 LUW C9EN Released Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code m (1T) LOT NO: Lot Number R077 Sa Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A 180 (7) 2012-03-07 W Nmin W1 W2 max 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 15 LUW C9EN Released Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE el . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 RS _ inf pa < % ins VE to ak of ITI TO 90 urs d nta ). < ns (pe or urs d co NSUC , Ho de cte itio g SEND Ho urs an bje ing C co 72 nd Ho urs 5 ba E CO te C su ss 48 e Ho co ce is UR 24 6 da e y MI 40 be tim C h ThISTSE l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C MO Flo s tim TO at or ca at re. Flo d tha ale el or nth nti OP Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al Le ist urere en ref e e 10 tim for se ale op se for > se , Mo ististu ure 3 is or . , is ha se Mo be nk ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy e 4 8 ref red reqy is 2. bo e Mo /JE tim 16 dit2b req : a) tim e e Sto es or mi IPC ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo U A C Barcode label N TIO O S R A M d Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label el M Y DE R 18 -1 -1 +Q P 44 01 98 C: (9 D) : 34 (Q )Q TY : H 12 O 20 00 D/ 210 02 19 S S em R ic AM o nd O u p ct to o H rs NO BA P) 5 14 2 (6 NO :1 T 11 00 LO OD NO : (1 T) PR (X ) M Y DE -1 18 Q + P -1 G RO UP : (G ) u L lt S iT Y O T6 P 7 L 6 R E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: 01 D/ C: (9 D) 0 AM 00 TY :2 )Q 5 O SR (Q A 21 00 21 99 8 R ic NO : H 12 O S em BA TC H 3G : 12 (X ) PR O D NO : (1 T) 11 00 LO T 14 2 NO (6 P) S 34 o M n O d u p ct to o rs 44 M 23 G TC Nns IVEORS ai IT ntNS CT TIO DU U g EcoSE ON Ais ba IC UR M Muster C RO UP : L G E V LE see . lab e H) nk, cod (R bla r If ty ba . idi RH m hu 0% e /6 ive d C re ag lat ra ck re 30 _ < inf pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or Th STSE th r pr < ll tim ct ). OI 23 oo r wi nt tim e at l wi fa r M TO Fl oo tim s at at ale C at e. ica Fl th th oo r ur el OP nt Fl oo on es uiv if: read ed l 4 5 Fl , lab m ide eq low oc ve l vic is ingen de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al d Le r en re re e re 10 ois tu tim se fo tu re ale op se fo > , M ois r se 3 is , is ha se M ois tu nk be oo . 03 nk rd g M ois in r-p bla in Fl RH g, DM ba Ca po If blath % kinr life is (if . ar ST p. wi 10 ba to et Jelf r th va Ye ar ks s m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho no ire DE Af flody In qu 1. e ou 4 8 re ed re ty is qu JE 2. bo M or tim e e 16 re C/ : es idi 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l Le re Ba te Le ve tu re Le Da ois tu re tu re M ois M ois tu M ois M (G ) M u L lt S iT Y O T67 P L 6 Muster E Bi D n1 Bi Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2012-03-07 16 OHA02044 LUW C9EN Released Revision History: 2012-03-07 Previous Version: 2010-12-08 Page Subjects (major changes since last revision) Date of change all Preliminary datasheet created 2010-04-28 all Final datasheet released 2010-06-30 2 Correlation table deleted 2010-12-08 7 Changed minimum current 2012-03-06 Patent List Patent No. US 6 066 861 US 6 277 301 US 6 245 259 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components7) page 18 may only be used in life-support devices or systems8) page 18 with the express written approval of OSRAM OS. 2012-03-07 17 LUW C9EN Released Funoten: 1) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Farbkoordinaten werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,005 und einer erweiterten Messunsicherheit von +/- 0,01 gemessen (gema GUM mit Erweiterungsfaktor k = 3). 4) Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). 5) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 6) Mae werden wie folgt angegeben: mm (inch) 7) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 8) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) 3) 4) 2012-03-07 5) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 6) Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 7) 8) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 18 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to GUM with a coverage factor of k = 3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.