TOSHIBA Octal Bus Buffer TC74HC7240 Inverted, 3-State Outputs TC74HC7241 Non-Inverted, 3-State Outputs TC74HC7244 Non-Inverted, 3-State Outputs The TC74HC240A, 241A AND 244A are high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate CMOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The TC74HC? 240A/7241A/7244A have same pin con- figuration and function as the TC74HC240A/241A/244A. And they have a hysteresis characteristics with each input, so TC74HC7240A/7241A/7 244A can be used as a line receiver, etc. The 74HC7 240A is an inverting 3-state buffer having two active low output enables. The TC74HC7241A and HC7244A are non-inverting 3-state buffers that differ only in that the 7241A has one active-high and one active-low output enable, and the HC7244A has two active-low output enables. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Features High Speed: thy = 15ns(Typ.) at Voc = 5V Low Power Dissipation: leg = 4uA(Max.) at Ta = 25C High Noise Immunity: Vai = 1.1V(Typ.) at Veg = 5V * Output Drive Capability: 15 LSTTL Loads TC74HC7240AP/AF TC74HC7241AP/AF TC74HC7244AP/AF F * Symmetrical Output Impedance: Iloy! = lo, = BMA(Min.) * Balanced Propagation Delays: ty, = toa Wide Operating Voltage Range: Vec(opr) = 2V ~ 6V * Pin and Function Compatible with 74LS240/241/244 TC74HC7240A 16 1 1A1 2 C Ba

- Note (1) Cpp is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: lecwopn = Cen * Voc * fin + loc/8(per bit) 774 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.