T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10QBC/G Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Blue source color devices are made with InGaN Light z Popular T-1 diameter package. Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 1 OF 6 ERP: 1101029215 Selection Guide Part No. Dice WP710A10QBC/G Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 1800 2800 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 461 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 50 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 2 OF 6 ERP: 1101029215 Blue WP710A10QBC/G SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 3 OF 6 ERP: 1101029215 PACKING & LABEL SPECIFICATIONS WP710A10QBC/G SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 4 OF 6 ERP: 1101029215 SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 5 OF 6 ERP: 1101029215 SPEC NO: DSAL0522 REV NO: V.1 DATE: AUG/11/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 6 OF 6 ERP: 1101029215