APPLICATIONS:
• ISM 868 / 915MHz
• Low power radio links
• Sensor networks
• For use with ultra low power transceiver IC’s
FEATURES:
RFID Chip Antenna
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
9.0 x 3.0 x 1.2 mm
STANDARD SPECIFICATIONS
Moisture Sensitivity Level (MSL) – MSL = 1
Pb
RoHS / RoHS II Compliant
ACAJ-110-T
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 11.20.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
PART IDENTIFICATION:
• Passive Dielectric Chip Antenna
• Covering dual ISM bands 868MHz and 915MHz
• SMA mount, Reflowable to 255 degrees C max.
• Compact Dimensions (9.0mm x 3.0mm x 1.2mm)
• Peak Gain – 868MHz -2.5dBi, 915MHz -2.7dBi
• VSWR 3.0:1 Max (measured on matched EV board)
• Impedance 50 Ohms
• Linear Polarization / Omni-directional azimuth pattern
• RoHS/RoHS II compliant
The results are measured on the 100x50mm2 evaluation board.
ITEM SPECIFICATION
Frequency Range 868/915MHz
VSWR 3.0: 1 Max
Polarization Linear
Azimuth Beam Pattern Omni-directional
Impedance 50Ω
Operating Temperature -35ºC to + 85ºC
Frequency [MHz] 868 915
Gain
[dBi]
Peak -2.5 -2.7
Average -3.4 -1.8
Efficiency [%] 34 37
ACAJ-110-
Packaging
Blank: Bulk
T: Tape and Reel (1000 per reel)
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Pb
RoHS / RoHS II Compliant
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 11.20.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
Antenna Top
Antenna Bottom
NO
Pin Assignment
①
Feeding
②
N/C
③
N/C (Connected Stub line)
PCB DESIGN GUIDE
Typical Measurement Result (VSWR, RL & Smith Chart) @ 868MHz
Measured VSWR & Return-loss @868MHz
NO
Matching Value
①
N/C
②
15 nH
③
5.0 pF
MEASUREMENT GUIDE
Measured Smith Chart @868MHz
RFID Chip Antenna
9.0 x 3.0 x 1.2 mm
ACAJ-110-T
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Pb
RoHS / RoHS II Compliant
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 11.20.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
S11 (VSWR)- Penta Band (GSM850&900, DCS, PCS, U
MTS)
Typical Measurement Result (VSWR, RL & Smith Chart) @ 915MHz
Measured VSWR & Return-loss @915MHz
Measured Smith Chart @ 915 MHz
NO
Matching Value
①
N/C
②
8.2 nH
③
4.3 pF
Measured Antenna Efficiency
Measured Average Gain
RFID Chip Antenna
9.0 x 3.0 x 1.2 mm
ACAJ-110-T
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
OUTLINE DIMENSION:
Pb
RoHS / RoHS II Compliant
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 11.20.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
REFLOW PROFILE:
No
Name
Function
Material
1
Electrode
Radiation Element
Ag
2
Electrode
Identification Mark
Ag
3
Body
Dielectric Material
Ceramic
Unit: mm
RFID Chip Antenna
9.0 x 3.0 x 1.2 mm
ACAJ-110-T
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
TAPE & REEL:
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Pb
RoHS / RoHS II Compliant
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 11.20.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
RFID Chip Antenna
9.0 x 3.0 x 1.2 mm
ACAJ-110-T
A0
3.20 ±0.10
P0
4.00 ±0.10
E
1.75±0.10
B0
9.20 ±0.10
P1
8.00 ±0.10
F
7.50 ±0.10
K0
1.65 ±0.10
P2
2.00 ±0.10
W
16.00 ±0.30
D0
1.55 ±0.05
-
-
t
0.30 ±0.05
Packing Quantity
Item
Quantity
Dimension
Reel
1,000 ea
Φ7” * 16mm
Tape Dimensions
(mm)
CAUTION:
Static voltage
Static voltage between signal & ground may cause deterioration & destruction of the component. Please avoid static voltage.
Ultrasonic cleaning
Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning.
Soldering
Only leads of the component may be soldered. Please avoid soldering to any other part of the component, such as the Ag patterning
as this will change the performance of the antenna.
i) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this
specification, please contact ABRACON for more information.
ii) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order
placement.
iii) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of
this specification.
iv) When changing your production process, please notify ABRACON immediately.
v) ABRACON LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where
designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Lifedependant
Medical applications or any application requiring high reliability where component failure could result in loss of life and/or
property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from ABRACON LLC is required. Please contact ABRACON LLC for more information.
vi) All specifications and Marking will be subject to change without notice.
NOTES:
