Ni FUJITSU Bist HUM KN MB89710 SERIES T209-A879: September 1987 DESCRIPTION fication Som pavametne limits are Subyci t > cfisnge oe The Fujitsu MB89710 Series Flexible Microcontrollers are the new generation CMOS 8-bit single-chip micro- controllers, which have powerful architecture and efficient instruction set designed for high speed real time controller applications. The MB89713/89715 are designed based on a highly efficient 16-bit CPU core with 8-bit data bus (called F?MC-8 family CPU core) that has an effi- instruction set and high speed nested interrupt capability. The MB89713/89715 provide a set of basic resources: an 8K x 8 bits/16K x 8 bits mask ROM(program memory) a 260 x 8 bits/516 x 8 bits static RAM (data memory) 53 I/0 lines (five 8-bit, two 5-bit, and one 3-bit parallel ports), a watchdog timer, eleven-source three-programmable-priority~level nested interrupt, and an 8MHz clock generator. In addition to these features, they have another of specific resources: Real Time I/O ports (4 inputs and 4 outputs), PWM/Timer module configured as 8 bits x 2 channels or 16 bits x one channel, a UART module with full-duplex serial communication capabil- ity, and a serial interface for I/0 expansion. The high performance realized by these features is usefule for high speed real time control applications such as printers, lap-top personal computer, fac- simile machines, copy machines, automoble meters, and survo controllers. The MB89713/89715 are fabricated by the silicon-gate CMOS process, and packaged in a 64-pin plastic shrink DIP (suffix -P) or a 64-pin plastic QFP (suffix -PF). They operate with a single +5V power supply and a clock of at most 8MHz. The instruction execution time is at least Sys at 8MHz clock. In addition to these mask ROM versions, the external ROM versions, MB89T713/89T715, the piggyback evalua- tion devices, MB89PV713/89PV715, and OTP/EPROM ver- MB89713P/MB89715P 64-PIN PLASTIC SHRINK DIP (DIP-64P-M01) MB89713PF /MB89715PF 64-PIN PLASTIC QFP (FPT-64P-M01) MB89PV713C/MB89PV715C 64-PIN CERAMIC DIP MODULE (MDIP-64C-P01) MB8S9PV713CF /MB89PV715CF 7.8.9. 64-PIN CERAMIC QFP MODULE (MQP-64C-P01) sions are provided for users' efficient development. Also, development tools are supported. F*MC (Fujitsu Flexible Micro Controller) is a trade- mark of FUJITSU LIMITED. -l- This device contains circuitry to protect the inputs against damage due to high static voltages or elec- tric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.BAC FUJITSU MB89710 SERIES _ [ffilillil FEATURES e F?MC-8 Family CPU Core: 16-Bit Architecture 8-Bit Data Bus 64K x 8 Bit Internal Program/Data Memory Space 128K x 8 Bit External Data Memory Space Memory Mapped I/0 Powerful and Compact Instruction Set - Bit and Word Operations, Multiply and Divide * Instruction Count - 135 * Instruction Execution Time - Min 0.5ys at 8MHz Clock ee te Ft FS Basic Resources: ROM - 8K x 8 Bits (MB89713), 16K x & Bits (MB89715) RAM - 260 x 8 Bits (MB89713), 516 x 8 Bits (MB89715) I/O - 53 Ports: Push-Pull Buffered Ports - 43; Open-Drain Buffered Ports - 8 Watchdog Timer Power-On Reset Interrupt - 11 Sources (including 3 External Interrupt Inputs), Nested, 3 Programmable Priority Levels, High Speed (2us at 8MHz), Standby - Halt Mode, Stop Mode Intel Type Bus Interface for External Memory and I/0 Access Clock Generator - 8MHz tt Ft HF +e F e Specific Resources: * Real Time I/0 - 4 Output Compare Channels and 4 Input Capture Channels * PWM/Timer - 8 Bitz x 2 Channel or 16 Bits x 1 Channel * A/D Converter - 8 Bits x 8 Channels %* UART - One Channel, Full-Duplex and Double Buffering * Serial Interface for I/O Expansion - One Channel e Single +5V Power Supply, -40C to +85C, Max 8MHz Clock Process - Silicon-Gate CMOS Technology Package - 64-Pin Plastic Shrink DIP, 64-Pin Plastic QFP Development Support Devices: * Piggyback Evaluation Devices - MB89PV713, MB89PV715 * External ROM Devices ~ MB89T713, MB89T715 * OTP/EPROM Devices ~ MB89P713, MB89W715 Development Support Tools: * Host Machine - IBM PC/XT, PC/AT, or Equivalents * Software Tools - C Compiler, Macro Assembler, Linker/Library Manger * Hardware Tools - In-Circuit Emulator (MB2120 Series + Host Emulator) FMC is a trademark of FUJITSU LIMITED.Feature MB89713 MB89715 Data bus width 8-bits 8-bits Address bus width 16-bits 16-bits ROM 8K bytes 16K bytes RAM 260 bytes 516 bytes Direct access memory address 64KB Main Memory (ROM/RAM, ext memory) plus 64K byte banks of Data Memory Interrupt sources 10 internal/3 external Priority levels 3 plus NMI Timers/counters 1x21 bits/1x16 bits/1x16 or 2x8 bits Watchdog timer 1x21 bit General purpose I/O 53, selectable in/out/bidirectional Serial I/0 1 channel x 8-bits Real time I/O Input capture/output compare A/D converter 8 channels/8-bit resolution UART full duplex/synchronous/asynchronous PWM 1x16 bits or 2x8 bits Standby modes Sleep & stop Instruction cycle time 0.5 uS/8 MHz Packages 64 pin shrink DIP/quad flat pack