R66 NISSEI-ARCOTRONICS MKT Series Bulk Taped Fig. 1 METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE Fig. 2 Typical application: this series combines small size, good performances in by-passing, blocking, pulse coupling and interference suppression in low voltage applications (i.e.: AUTOMOTIVE). SERIES CODE: R66 Construction: * STACKED and WOUND technology 3.5 0.6 B max 2.5 0.5 to 0.6 Od 0.05 All dimensions are in mm. PART NUMBERING SYSTEM 1 2 3 4 GENERAL TECHNICAL DATA 5 6 R6 6 1. 2. 3. 4. 5. 6. 8. 8 Series code Capacitance value in pico farads. First 2 digits are significant and 3rd digit indicates number of zeros. Capacitance tolerance K = 10% M = 20% D.C. voltage Packaging code B = bulk; A = ammo Lead length (mm) - (Applies to bulk packaging only. Omit for standard lead length 4-6mm.) L = 15-18 7. 7 [ ] J = 5% T = 3.5-4.0 p= 7.5 mm Dielectric: Plates: polyester film (polyethylene terephthalate). aluminum layer deposited by evaporation under vacuum Winding: non-inductive type Leads: tinned wire Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 V0 Marking: Manufacturer's logo, capacitance, tolerance, D.C. voltage Climatic category: 55/100/56 IEC 60068-1 Operating temperature range: -55 to +105C For stacked technology an upper operating temperature of +125C is allowed for a max. operating time of 1000h. Related documents: IEC 60384-2; CECC 30400 Detail specifications: CECC 30401-009 V = 2.7-3.3 Construction (omit for wound construction) Q = Stacked version Internal code Winding scheme single sided metallized polyester film R66 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p = 7.5mm SERIES CODE: R66 STACKED VERSION 0.33F 0.47F 0.68F 1.0F 1.5F 2.2F 3.3F Rated Cap. 0.068F 0.10F 0.15F 0.22F 0.33F 0.47F 0.68F 1.0F 1.5F Rated Cap. P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 120 120 120 120 120 120 120 P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 150 150 150 150 150 150 150 150 150 63Vdc/40Vac B H 2.5 7.0 3.0 8.0 3.5 8.5 4.0 9.0 5.0 11.0 6.0 12.0 6.0 12.0 L 10.0 10.0 10.5 10.5 10.5 10.5 10.5 100Vdc/63Vac B H 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 3.5 8.5 3.5 8.5 4.0 9.0 5.0 11.0 6.0 12.0 L 10.0 10.0 10.0 10.0 10.5 10.5 10.5 10.5 10.5 Max K0 (V /s) 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 R66334-63--Q R66474-63--Q R66684-63--Q R66105-63--Q R66155-63--Q R66225-63--Q R66335-63--Q Max K0 Part Number 2 (V /s) 30 E3 30 E3 30 E3 30 E3 30 E3 30 E3 30 E3 30 E3 30 E3 Max Max K0 dv/dt B H L P (V/s) (V2/s) 0.022F 2.5 7.0 10.0 7.5 200 100 E3 0.033F 2.5 7.0 10.0 7.5 200 100 E3 0.047F 2.5 7.5 10.0 7.5 200 100 E3 0.068F 3.0 8.0 10.0 7.5 200 100 E3 3.5 8.5 10.5 7.5 200 100 E3 0.10F 4.0 9.0 10.5 7.5 200 100 E3 0.15F 5.0 11.0 10.5 7.5 200 100 E3 0.22F 6.0 12.0 10.5 7.5 200 100 E3 0.33F Tolerance: J (5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (15-18); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 250Vdc/160Vac Rated Cap. Part Number 2 R66683-100--Q R66104-100--Q R66154-100--Q R66224-100--Q R66334-100--Q R66474-100--Q R66684-100--Q R66105-100--Q R66155-100--Q Part Number R66223-250--Q R66333-250--Q R66473-250--Q R66683-250--Q R66104-250--Q R66154-250--Q R66224-250--Q R66334-250--Q 6800F 0.010F 0.015F 0.022F 0.033F 0.047F 0.068F 0.10F 0.15F Rated Cap. 400Vdc/200Vac B H 2.5 7.0 2.5 7.0 2.5 7.0 3.0 8.0 3.5 8.5 4.0 9.0 5.0 11.0 6.0 12.0 6.0 12.0 L 10.0 10.0 10.0 10.0 10.5 10.5 10.5 10.5 10.5 P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 275 275 275 275 275 275 275 275 275 Max K0 Max Max K0 dv/dt B H L P (V/s) (V2/s) 2.5 7.0 10.0 7.5 300 378 E3 1000F 2.5 7.0 10.0 7.5 300 378 E3 1500F 2.5 7.0 10.0 7.5 300 378 E3 2200F 2.5 7.0 10.0 7.5 300 378 E3 3300F 2.5 7.0 10.0 7.5 300 378 E3 4700F 3.0 8.0 10.0 7.5 300 378 E3 6800F 0.010F 3.5 8.5 10.5 7.5 300 378 E3 0.015F 4.0 9.0 10.5 7.5 300 378 E3 0.022F 5.0 11.0 10.5 7.5 300 378 E3 0.033F 6.0 12.0 10.5 7.5 300 378 E3 0.047F 6.0 12.0 10.5 7.5 300 378 E3 Tolerance: J (5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (15-18); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 630Vdc/220Vac* Part Number 2 (V /s) 220 E3 220 E3 220 E3 220 E3 220 E3 220 E3 220 E3 220 E3 220 E3 R66682-400--Q R66103-400--Q R66153-400--Q R66223-400--Q R66333-400--Q R66473-400--Q R66683-400--Q R66104-400--Q R66154-400--Q Part Number R66102-630--Q R66152-630--Q R66222-630--Q R66332-630--Q R66472-630--Q R66682-630--Q R66103-630--Q R66153-630--Q R66223-630--Q R66333-630--Q R66473-630--Q In Progress Rated Cap. In progress C6800F @ 630Vdc * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors. All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. R66 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p = 7.5mm SERIES CODE: R66 WOUND VERSION Rated Cap. 0.10F 0.15F 0.22F 0.33F 0.47F 0.68F 1.0F Rated Cap. B H 2.5 7.0 2.5 7.0 3.5 8.5 3.5 8.5 4.0 9.0 5.0 11.0 6.0 12.0 L 10.0 10.0 10.5 10.5 10.5 10.5 10.5 P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 6 6 6 6 6 6 6 100Vdc/63Vac 0.047F 0.068F 0.10F 0.15F 0.22F 0.33F 0.47F Rated Cap. P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 5 5 5 5 5 5 5 63Vdc/40Vac B H 2.5 7.0 2.5 7.0 3.5 8.5 3.5 8.5 3.5 8.5 5.0 11.0 6.0 12.0 L 10.0 10.0 10.5 10.5 10.5 10.5 10.5 Max K0 (V /s) 0.63 E3 0.63 E3 0.63 E3 0.63 E3 0.63 E3 0.63 E3 0.63 E3 R66104-63-R66154-63-R66224-63-R66334-63-R66474-63-R66684-63-R66105-63-- Max K0 Part Number Note: 3300F 4700F 6800F 0.010F 0.015F 0.022F 0.033F 0.047F 0.068F 0.10F 2 (V /s) 1.2 E3 1.2 E3 1.2 E3 1.2 E3 1.2 E3 1.2 E3 1.2 E3 Max Max K0 dv/dt B H L P (V/s) (V2/s) 7.5 E3 0.015F 2.5 7.0 10.0 7.5 15 7.5 E3 0.022F 2.5 7.0 10.0 7.5 15 7.5 E3 0.033F 2.5 7.0 10.0 7.5 15 7.5 E3 0.047F 3.5 8.5 10.5 7.5 15 7.5 E3 0.068F 3.5 8.5 10.5 7.5 15 4.0 9.0 10.5 7.5 15 7.5 E3 0.10F 5.0 11.0 10.5 7.5 15 7.5 E3 0.15F 6.0 12.0 10.5 7.5 15 7.5 E3 0.22F Tolerance: J (5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (15-18); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 250Vdc/160Vac Rated Cap. Part Number 2 R66473-100-R66683-100-R66104-100-R66154-100-R66224-100-R66334-100-R66474-100-Part Number R66153-250-R66223-250-R66333-250-R66473-250-R66683-250-R66104-250-R66154-250-R66224-250-- Rated Cap. 400Vdc/200Vac B H 2.5 7.0 2.5 7.0 2.5 7.0 2.5 7.0 3.5 8.5 3.5 8.5 4.0 9.0 5.0 11.0 5.0 11.0 6.0 12.0 L 10.0 10.0 10.0 10.0 10.5 10.5 10.5 10.5 10.5 10.5 P 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Max dv/dt (V/s) 30 30 30 30 30 30 30 30 30 30 Max K0 Max Max K0 dv/dt B H L P (V/s) (V2/s) 2.5 7.0 10.0 7.5 40 50 E3 1000F 2.5 7.0 10.0 7.5 40 50 E3 1500F 2.5 7.0 10.0 7.5 40 50 E3 2200F 3.5 8.5 10.5 7.5 40 50 E3 3300F 3.5 8.5 10.5 7.5 40 50 E3 4700F 3.5 8.5 10.5 7.5 40 50 E3 6800F 50 E3 0.010F 4.0 9.0 10.5 7.5 40 50 E3 0.015F 5.0 11.0 10.5 7.5 40 50 E3 0.022F 6.0 12.0 10.5 7.5 40 Tolerance: J (5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (15-18); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) * 630Vdc/220Vac* Part Number 2 (V /s) 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 R66332-400-R66472-400-R66682-400-R66103-400-R66153-400-R66223-400-R66333-400-R66473-400-R66683-400-R66104-400-Part Number R66102-630-R66152-630-R66222-630-R66332-630-R66472-630-R66682-630-R66103-630-R66153-630-R66223-630-- Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors. If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. R66 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p = 7.5mm SERIES CODE: R66 ELECTRICAL CHARACTERISTICS Rated voltage (VR): 63Vdc - 100Vdc - 250Vdc 400Vdc - 630Vdc Rated temperature (TR): +85C Voltage derating vs. temperature: for temperatures between +85C and the upper operating temperature (+105C for wound technology and +125C for stacked technology) a decreasing factor of 1.25% per C on the rated voltage VR has to be applied. Capacitance range: 1000F to 3.3F Capacitance values: E6 series (IEC 60063 Norm) 8nH Dissipation factor (DF): tgx10-4 at +25C 5C kHz tgx10-4 1 100 10 150 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance +40C 2C 93% 2% 56 days Capacitance change (C/C): 5% DF change (tg): Insulation resistance: Endurance: Test conditions Temperature: Test duration: Voltage applied: Performance Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): (lead length ~2mm) TEST METHOD AND PERFORMANCE 50% of initial limit +100C 2C 2000 h 1.25xVC Capacitance change (C/C): 5% DF change (tg): -4 50x10 at 1kHz -4 50x10 at 10kHz Insulation resistance: 50% of initial limit Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen): 10 s 1 s Performance Capacitance change (C/C): 2% DF change (tg): +25C 5C 1 min 50Vdc for VR < 100Vdc 100Vdc for VR 100Vdc For VR 100Vdc 3750 M for C 0.33F (5000 M)* 1250 s for C > 0.33F (5000 s)* For VR >100Vdc 30000M (50000 M)* *Typical value Test voltage between terminals: 1.6xVR applied for 2 s at +25C 5C -4 50x10 at 10kHz Insulation resistance: initial limit Long term stability (after two years): Storage: standard environmental conditions see general information section. Performance Capacitance change (C/C): 3% for C 0.1F RELIABILITY Reference MIL HDB 217 Application conditions: Temperature: Voltage: Failure rate: 2% for C> 0.1F +40C 2C 0.5xVR 2 FIT -9 (1 FIT = 1x10 failures/componentsxh) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change (C/C): > 10% DF change (tg): > 2xinitial limit Insulation resistance: < 0.005xinitial limit R66 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p = 7.5mm SERIES CODE: R66 MAX. VOLTAGE (Vrms) VERSUS FREQUENCY (sinusoidal waveform / Th 40C) Note: p (pitch) in mm.