SHAOXING RISING-SUN TECHNOLOGY CO., LTD. RS3A THRU RS3M SURFACE MOUNTED FAST RECOVERY RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 3.0A Features SMC/DO-214AB Glass passivated junction chip For surface mounted application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 250/10sec/at terminal/complete device Fast recovery time for high efficiency Mechanical data Cases: Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Terminals: Plated axial leads solderable MIL-STD 202E, method 208C Polarity: Color band denote cathode end Weight:0.007 ounce, 0.21 gram Dimensions in inches and (millimeters) Maximum ratings and electrical characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols RS2A RS2B RS2D RS2G RS2J RS2K RS2M Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 550 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 3/8" lead length at TL=100 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at rated forward current Maximum DC reverse current Ta=25 At rated DC blocking voltage Ta=125 IF(AV) 3.0 A IFSM 100.0 A VF 1.3 V 10.0 A 250.00 A IR Maximum Reverse Recovery Time Trr 150 250 500 nS Typical junction capacitance CJ 60.0 pF Typical thermal resistance RJA 50.0 /W Storage and operating junction temperature TSTG -50 to +150 Notes: 1. Measured at 1.0MHz and applied voltage of 4.0Vdc 2. Thermal resistance from junction to terminal mounted on 5x5mm copper pad area 3. Reverse recovery condition If=1.0A,Irr=0.25A http://www.rs-elec.com