Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised May 2005 MM74HCT373 * MM74HCT374 3-STATE Octal D-Type Latch * 3-STATE Octal D-Type Flip-Flop General Description Features The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic & pin-out compatible. The 3-STATE outputs are capable of driving 15 LSTTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. TTL input characteristic compatible Typical propagation delay: 20 ns Low input current: 1 PA maximum Low quiescent current: 80 PA maximum Compatible with bus-oriented systems Output drive capability: 15 LS-TTL loads When the MM74HCT373 LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT374 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. Ordering Code: Order Number Package Number MM74HCT373WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MM74HCT373SJ MM74HCT373MTC MM74HCT373N MTC20 N20A Package Descriptions 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide MM74HCT374WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide MM74HCT374SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MM74HCT374MTC MM74HCT374N MTC20 N20A 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. (c) 2005 Fairchild Semiconductor Corporation DS005367 www.fairchildsemi.com MM74HCT373 * MM74HCT374 3-STATE Octal D-Type Latch * 3-STATE Octal D-Type Flip-Flop February 1984 MM74HCT373 * MM74HCT374 Connection Diagrams Top View MM74HCT374 Top View MM74HCT373 Truth Tables MM74HCT373 Output LE MM74HCT374 Data Control 373 Output Output Control Clock Data Output H L L (374) L H H H L L H L L L n n L L X Q0 L L X Q0 H X X Z H X X Z H HIGH Level L LOW Level Q0 Level of output before steady-state input conditions were established. Z High Impedance www.fairchildsemi.com H H HIGH Level L LOW Level X Don't Care n Transition from LOW-to-HIGH Z High Impedance State The level of the output before steady state input conditions were Q0 established. 2 MM74HCT373 * MM74HCT374 Logic Diagrams MM74HCT373 MM74HCT374 3 www.fairchildsemi.com MM74HCT373 * MM74HCT374 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) 0.5 to 7.0V 1.5 to VCC 1.5V 0.5 to VCC 0.5V r20 mA r35 mA r70 mA 65qC to 150qC Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) Clamp Diode Current (IIK, IOK) DC Output Current, per pin (IOUT) DC VCC or GND Current, per pin (ICC) Storage Temperature Range (TSTG) Supply Voltage (VCC) DC Input or Output Voltage 600 mW S.O. Package only 500 mW Max 4.5 5.5 Units V 0 VCC V 40 85 qC 500 ns (VIN, VOUT) Operating Temperature Range (TA) Input Rise or Fall Times (tr, tf) Power Dissipation (PD) (Note 3) Min Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Note 2: Unless otherwise specified all voltages are referenced to ground. Note 3: Power Dissipation temperature derating -- plastic "N" package: 12 mW/qC from 65qC to 85qC. Lead Temperature (TL) 260qC (Soldering 10 seconds) DC Electrical Characteristics VCC 5V r 10% (unless otherwise specified) Symbol VIH Parameter TA Conditions Minimum HIGH Level Input Voltage VIL Maximum LOW Level Input Voltage VOH TA 55 to 125qC Units 2.0 2.0 2.0 V 0.8 0.8 0.8 V VIN |IOUT| VIH or VIL 20 PA VCC VCC 0.1 VCC 0.1 VCC 0.1 V |IOUT| 6.0 mA, VCC 4.5V 4.2 3.98 3.84 3.7 V 7.2 mA, VCC 5.5V 5.7 4.98 4.84 4.7 V Maximum LOW Level VIN VIH or VIL |IOUT| 20 PA 0 0.1 0.1 0.1 V |IOUT| 6.0 mA, VCC 4.5V 0.2 0.26 0.33 0.4 V 7.2 mA, VCC 5.5V 0.2 0.26 0.33 0.4 V r0.1 r1.0 r1.0 PA r0.5 r5.0 r10 PA 8.0 80 160 PA 1.0 1.3 1.5 mA |IOUT| IOZ 40 to 85qC Guaranteed Limits Output Voltage Voltage IIN TA Minimum HIGH Level |IOUT| VOL 25qC Typ Maximum Input VIN VCC or GND, Current VIH or VIL Maximum 3-STATE VOUT Output Leakage Enable VCC or GND VIH or VIL Current ICC Maximum Quiescent VIN Supply Current IOUT VIN VCC or GND 0 PA 2.4V or 0.5V (Note 4) Note 4: Measured per pin. All others tied to VCC or ground. www.fairchildsemi.com 4 MM74HCT373: VCC 5.0V, tr Symbol tPHL, tPLH tf 6 ns TA 25qC (unless otherwise specified) Parameter Conditions Maximum Propagation Delay tPHZ, tPLZ Units 45 pF 18 25 ns CL 45 pF 21 30 ns Maximum Enable Propagation Delay CL 45 pF Control to Output RL 1 k: 20 28 ns Maximum Disable Propagation Delay CL 5 pF Control to Output RL 1 k: 18 25 ns Maximum Propagation Delay Latch Enable to Output tPZH, tPZL Limit CL Data to Output tPHL, tPLH Guaranteed Typ tW Minimum Clock Pulse Width 16 ns tS Minimum Setup Time Data to Clock 5 ns tH Minimum Hold Time Clock to Data 10 ns AC Electrical Characteristics MM74HCT373: VCC 5.0V r 10%, tr Symbol Parameter tf 6 ns (unless otherwise specified) TA 25qC Conditions TA 40 to 85qC TA 55 to 125qC Typ tPHL, tPLH Maximum Propagation Delay Data to Output tPHL, tPLH Maximum Propagation Delay Latch Enable to Output tPZH, tPZL Maximum Enable Propagation Delay Control to Output tPHZ, tPLZ Maximum Disable Propagation Delay Control to Output tTHL, tTLH Maximum Output Rise Units Guaranteed Limits CL 50 pF 22 30 37 45 CL 150 pF 30 40 50 60 ns ns CL 50 pF 25 35 44 53 ns CL 150 pF 32 45 56 68 ns CL 50 pF 21 30 37 45 ns 30 40 50 60 ns 21 30 37 45 ns 8 12 15 18 ns ns CL 150 pF RL 1 k: CL 50 pF RL 1 k: CL 50 pF and Fall Time tW Minimum Clock Pulse Width 16 20 24 tS Minimum Setup Time Data to Clock 5 6 8 ns tH Minimum Hold Time Clock to Data 10 13 20 ns CIN Maximum Input Capacitance 10 10 10 pF COUT Maximum Output Capacitance 20 20 20 pF CPD Power Dissipation Capacitance OC VCC 5 pF (Note 5) OC GND 52 pF Note 5: CPD determines the no load dynamic power consumption, PD IS CPD VCC f ICC. CPD VCC2 f ICC VCC, and the no load dynamic current consumption, 5 www.fairchildsemi.com MM74HCT373 * MM74HCT374 AC Electrical Characteristics MM74HCT373 * MM74HCT374 AC Electrical Characteristics MM74HCT374: VCC 5.0V, tr Symbol tf 6 ns TA 25qC (unless otherwise specified) Parameter fMAX Maximum Clock Frequency tPHL, tPLH Maximum Propagation Delay Conditions Typ Guaranteed Limit Units 50 30 MHz CL 45 pF 20 32 ns Maximum Enable Propagation Delay CL 45 pF 19 28 ns Control to Output RL 1 k: Maximum Disable Propagation Delay CL 5 pF 17 25 ns Control to Output RL 1 k: to Output tPZH, tPZL tPHZ, tPLZ tW Minimum Clock Pulse Width 20 ns tS Minimum Setup Time Data to Clock 5 ns tH Minimum Hold Time Clock to Data 16 ns AC Electrical Characteristics MM74HCT374: VCC 5.0V r 10%, tr Symbol Parameter fMAX tf 6 ns (unless otherwise specified) TA Conditions Maximum Clock Frequency tPHL, tPLH Maximum Propagation Delay to Output tPZH, tPZL Maximum Enable Propagation Delay Control to Output tPHZ, tPLZ Maximum Disable Propagation Delay Control to Output tTHL, tTLH Maximum Output Rise 25qC TA Typ 40 to 85qC TA 55 to 125qC Guaranteed Limits Units 30 24 20 MHz CL 50 pF 22 36 45 48 ns CL 150 pF 30 46 57 69 ns CL 50 pF 21 30 37 45 ns CL 150 pF 30 40 50 60 ns RL 1 k: 21 30 37 45 ns 8 12 15 18 ns CL 50 pF RL 1 k: CL 50 pF and Fall Time tW Minimum Clock Pulse Width 16 20 24 ns tS Minimum Setup Time Data to Clock 20 25 30 ns tH Minimum Hold Time Clock to Data 5 5 5 ns CIN Maximum Input Capacitance 10 10 10 pF COUT Maximum Output Capacitance 20 20 20 CPD Power Dissipation Capacitance OC VCC (Note 6) OC GND Note 6: CPD determines the no load power consumption, PD www.fairchildsemi.com 5 58 CPD V CC2 f ICC VCC, and the no load dynamic current consumption, IS 6 pF pF pF CPD VCC f I CC. MM74HCT373 * MM74HCT374 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 7 www.fairchildsemi.com MM74HCT373 * MM74HCT374 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 8 MM74HCT373 * MM74HCT374 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 9 www.fairchildsemi.com MM74HCT373 * MM74HCT374 3-STATE Octal D-Type Latch * 3-STATE Octal D-Type Flip-Flop Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 10 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com