Connector for SD (Secure digital) Card Push-In / Out Ejector Type Conforms to SD Association standards SDC02/03 SERIES F-21 SDC02/03 SERIES Connector for SD (Secure Digital) Card FEATURES Conforms to SD Association standards The Push-In/Out mechanism has an audible "click" that assures users of complete card insertion/removal Ultra low profile at 27.9(W) X 28.5(L) X 2.75(H) mm (2.65(H) for the reverse type), including pin length A ribbed contact protection structure prevents pin buckling A simple lock mechanism prevents accidental fall-off, while a half-lock mechanism prevents card removal through operator error Retention clips with ESD (Electrostatic Discharge) function prevent Card pop-out during removal Earth shell specifications for EMI measures The write protection and card detection switch are standard equipment ORDER CODE SDC 09 Designed to prevent the incorrect insertion of Card D Plating of contact area D : Au 0.25m min. Positioning post type 0 : Without positioning posts 1 : 0.35mm length Number of contacts 09 : 9pin Type 02 : Normal mounting type 03 : Reverse mounting type Series name SDC : Connector for SD card (Push-In/Out ejector type) The 2 variations of positioning posts are available for PCB thickness and automatic placement machine (0.35mm length and no positioning post) The connector has a large suction area to provide support for automatic placement Supports for Multi Media cards (Can read and write) SPECIFICATIONS Insulator material : Glass-filled LCP (UL 94V-0), Black Slide cam material : Glass-filled PPS (UL 94V-0), Black Contact/Switch material : Phosphor Bronze Switch plating : Tin alloy over Nickel (Terminal area) RIBBED CONTACT PROTECTION STURCTURE SDC Series maintains a position where the tip of the contact area is surrounded by mould. It is structured so as to prevent shor ts and/or pin buckling which may happen during insertion/removal. Connector Cross Section : Gold over Nickel (Contact area) Shell material : Stainless steel Retention clip material : Phosphor Bronze Retention clip plating : Tin alloy over Nickel Shell Material : Stainless steel Current rating : 0.5A per contact Contact resistance : 100m max. Dielectric withstanding voltage : 500V AC for 1 minute Insulation resistance : 1000M min. at 500V DC Push-In/Out durability : 10,000 repetitions Operating temperature : -25 C to +85 C F-22 SDC02/03 SERIES Connector for SD (Secure Digital) Card SDC02-09-D (Standard Type) Unit:mm(inch) Standard Type 27.9(1.098) 21.12(0.831) 7X2.5=17.5(0.689) 1.62(0.064) 9.375(0.369) 14.63(0.576) 1(0.039) Ref. 12.5(0.492)(Card eject position) SDC02-09-0D A Center line for card 13.27(0.522) 2.750.15 (0.1080.006) 2.5(0.098) 28.5(1.122) 27.25(1.073) Ref. 1(0.039) 1126D 2.5(0.098) 15.35(0.604) Ref. 6(0.236)(Card push stroke) 87 6 5 4 3 2 1 9 Ref. 7.5(0.295)(Card lock position) Lot No. 25.35(0.998) 2.5(0.098) Ref. 2.1(0.083) Ref. 2.6(0.102) 24.2(0.953) 1.6(0.063) 2.6(0.102) 2.3(0.091) 22.6(0.890) 23.5(0.925) 3.2(0.126) Printed Circuit Board Layout (Component Side View) 23.50.05(0.9250.002) 9.3750.05(0.3690.002) 2.50.05(0.0980.002) 1.20.05(0.0470.002) 3.950.05(0.1560.002) 7.650.1 (0.3010.004) 8.150.1 (0.3210.004) 8.650.1 (0.3410.004) 10.450.1 (0.4110.004) Common SW 1min.(0.039min.) 1.4min. (0.055min.) 0.75min. (0.030min.) Write protection SW 1.70.05(0.0670.002) 21.4450.05(0.8440.002) 26.2750.05(1.0340.002) Diagonal line: Pattern prohibition area : Apply for SDC02-09-1D only Product 2-1.20.05(0.0470.002) 1.950.05(0.0770.002) 3.950.05(0.1560.002) Center line for card 26.50.05(1.0430.002) 1.620.05 (0.0640.002) 1.650.05 (0.0650.002) Card detection SW 2.20.05 1.750.05 (0.0870.002) (0.0690.002) 3.650.05(0.1440.002) 2.220.05(0.0870.002) 6.40.05(0.2520.002) 7X2.5=17.50.05(0.6890.002) 1.2min. (0.047min.) 13.650.05 (0.5370.002) 2.0550.05(0.0810.002) 87 6 5 4 3 2 1 9 1.70.05 (0.0670.002) 2.40.05 (0.0940.002) 17.80.05 (0.7010.002) 26.50.05(1.0430.002) 1.950.05(0.0770.002) 21.120.05(0.8310.002) Table/Dimensions Part Number SDC02-09-0D SDC02-09-1D Switch A 0 0.35 (0.014) Mechanism Write Protection SW Card detection SW and Common SW and Common SW ON ON Without IC card With IC card and ON OFF "Write Enable" position in card With IC card and "Write Protect" OFF OFF position in card Condition F-23 SDC02/03 SERIES Connector for SD (Secure Digital) Card SDC03-09-D (Reverse Type) Unit:mm(inch) 22.5(0.886) Reverse Type 12.3(0.484) 3.2(0.126) 27.9(1.098) 21.61(0.851) 7X2.5=17.5(0.689) 14.5(0.571) 9.375 (0.369) 1138D Lot No. Center line for card Ref. 2.1(0.083) 0.2 (0.008) 1.6 (0.063) Ref. 2.4(0.094) 2.3 (0.091) 2.650.15 (0.1040.006) 22.6(0.890) 26.45(1.041) Ref. 6(0.236)(Card push stroke) 9 1(0.039) A 1 2 3 4 5 6 7 8 28.5(1.122) 7.5(0.295)(Card lock position) SDC03-09-0D 1.62 (0.064) Ref.1(0.039) 2.4 (0.094) 2.25(0.089) 15.05(0.593) 12.5(0.492)(Card eject position) 2.5 (0.098) 24.2(0.953) Printed Circuit Board Layout (Component Side View) 220.05(0.8660.002) 7X2.5=17.50.05 (0.6890.002) 9.3750.05 (0.3690.002) 2.9250.05 (0.1150.002) 1.30.05 (0.0510.002) Write protection SW 1.70.05 (0.0670.002) 14.030.05 (0.5520.002) 14.650.05 (0.5770.002) 22.50.05 (0.8860.002) 27.130.05 (1.0680.002) 13.950.05 (0.5490.002) 26.60.05 (1.0470.002) 1.550.05 (0.0610.002) 130.05 (0.5120.002) 1.60.05 (0.0630.002) 0.450.05 (0.0180.002) 1.50.05 (0.0590.002) 2.50.05 (0.0980.002) Common SW 0.450.05 (0.0180.002) 1.40.05 (0.0550.002) Card detection SW 2.10.05 (0.0830.002) 0.60.05 (0.0240.002) 1.10.05 (0.0430.002) 1.650.05 (0.0650.002) 9 1 2 3 4 5 6 78 1.50.05 (0.0590.002) 1.90.05 (0.0750.002) 13.550.05 (0.5330.002) 1.620.05 (0.0640.002) 1.650.05 (0.0650.002) 2-1.20.05 (0.0470.002) 2.60.05 (0.1020.002) 26.750.05(1.0530.002) 14.250.05 (0.5610.002) 5.30.05 (0.2090.002) 2.550.05 (0.1000.002) 2.50.05 (0.0980.002) 1.20.05 (0.0470.002) Center line for card Diagonal line: Pattern prohibition area : Apply for SDC03-09-1D only Specifications and dimensions are subject to change without notice. F-24 Product Table/Dimensions Part Number SDC03-09-0D SDC03-09-1D Switch A 0 0.35 (0.014) Mechanism Write Protection SW Card detection SW and Common SW and Common SW ON ON Without IC card With IC card and ON OFF "Write Enable" position in card With IC card and OFF OFF "Write Protect" position in card Condition