SDC03-09-0D - Kel Corporation - Datasheet.Directory

Connector for SD (Secure digital) Card

Push-In / Out Ejector Type

Conforms to SD Association standards

SDC02/03 SERIES

F-21

FEATURES

SPECIFICATIONS

Conforms to SD Association standards

The Push-In/Out mechanism has an audible "click"

that assures users of complete card insertion/removal

Ultra low profile at 27.9(W) X 28.5(L) X 2.75(H) mm

(2.65(H)for the reverse type), including pin length

A ribbed contact protection structure prevents pin

buckling

A simple lock mechanism prevents accidental fall-off,

while a half-lock mechanism prevents card removal

through operator error

Retention clips with ESD (Electrostatic Discharge)

function prevent Card pop-out during removal

Earth shell specifications for EMI measures

The write protection and card detection switch are

standard equipment

Designed to prevent the incorrect insertion of Card

The 2 variations of positioning posts are available for

PCB thickness and automatic placement machine

(0.35mm length and no positioning post)

The connector has a large suction area to provide

support for automatic placement

Supports for Multi Media cards (Can read and write)

Insulator material : Glass-filled LCP

(UL 94V-0), Black

Slide cam material : Glass-filled PPS

(UL 94V-0), Black

Contact/Switch material

: Phosphor Bronze

Switch plating :

Gold over Nickel (Contact area)

Tin alloy over Nickel (Terminal area)

Shell material : Stainless steel

Retention clip material : Phosphor Bronze

Retention clip plating : Tin alloy over Nickel

Shell Material : Stainless steel

Current rating : 0.5A per contact

Contact resistance : 100mΩmax.

Dielectric withstanding voltage

: 500V AC for 1 minute

Insulation resistance : 1000MΩmin. at 500V DC

Push-In/Out durability : 10,000 repetitions

Operating temperature : -25 °C to +85 °C

SDC 09 D

Plating of contact area

D : Au 0.25m min.

Positioning post type

0 : Without positioning posts

1 : 0.35mm length

Number of contacts

09 : 9pin

Type

02 : Normal mounting type

03 : Reverse mounting type

Series name

SDC : Connector for SD card

(Push-In/Out ejector type)

ORDER CODE

RIBBED CONTACT PROTECTION STURCTURE

SDC Series maintains a position where the tip of the contact

area is surrounded by mould. It is structured so as to prevent

shorts and/or pin buckling which may happen during

insertion/removal.

Connector Cross Section

SDC02/03 SERIES

Connector for SD (Secure Digital) Card

F-22

SDC02-09-



D (Standard Type)

Printed Circuit Board Layout (Component Side View)

Center line for card

Lot No. A

SDC02-09-0D

Center line for card

1126D

25.35(0.998)

1(0.039)

Ref. 2.1(0.083)

Ref. 2.6(0.102)

27.9(1.098)

21.12(0.831)

7X2.5=17.5(0.689)

9.375(0.369)

1.62(0.064)

2.5(0.098)

28.5(1.122)

Ref. 7.5(0.295)(Card lock position)

Ref. 12.5(0.492)(Card eject position)

27.25(1.073)

Ref. 1(0.039)

Ref. 6(0.236)(Card push stroke)

13.27(0.522) 14.63(0.576)

24.2(0.953)

22.6(0.890)

23.5(0.925) 3.2(0.126)

2.75±0.15

(0.108±0.006)

2.3(0.091)

2.6(0.102)

1.6(0.063)

15.35(0.604)

2.5(0.098)

3.95±0.05(0.156±0.002)

1.2±0.05(0.047±0.002)

3.95±0.05(0.156±0.002)

2-1.2±0.05(0.047±0.002)

21.12±0.05(0.831±0.002)

23.5±0.05(0.925±0.002)

7X2.5=17.5±0.05(0.689±0.002)

2.5±0.05(0.098±0.002)

9.375±0.05(0.369±0.002)

1.62±0.05

(0.064±0.002)

1.65±0.05

(0.065±0.002)

17.8±0.05

(0.701±0.002)

26.5±0.05(1.043±0.002)

13.65±0.05

(0.537±0.002)

1.7±0.05

(0.067±0.002)

2.4±0.05

(0.094±0.002)

1.7±0.05(0.067±0.002)

21.445±0.05(0.844±0.002)

26.275±0.05(1.034±0.002)

Diagonal line: Pattern prohibition area

∗ : Apply for SDC02-09-1D only

1.95±0.05(0.077±0.002)

1min.(0.039min.)

7.65±0.1

(0.301±0.004)

8.15±0.1

(0.321±0.004)

8.65±0.1

(0.341±0.004)

10.45±0.1

(0.411±0.004)

26.5±0.05(1.043±0.002)

3.65±0.05(0.144±0.002)

1.75±0.05

(0.069±0.002)

2.2±0.05

(0.087±0.002)

1.4min.

(0.055min.)

1.95±0.05(0.077±0.002)

2.22±0.05(0.087±0.002)

6.4±0.05(0.252±0.002)

0.75min.

(0.030min.)

1.2min.

(0.047min.)

Write protection SW

Common SW

Card detection SW

123456789

2.055±0.05(0.081±0.002)

∗

Without IC card

With IC card and

"Write Enable"

position in card

With IC card and

"Write Protect"

position in card

Condition Write Protection SW

and Common SW

Card detection SW

and Common SW

OFF OFF

OFFON

ON ON

Switch Mechanism

Part Number

SDC02-09-0D

SDC02-09-1D

0.35

(0.014)

Product Table/Dimensions

Standard Type

Unit:mm(inch)

SDC02/03 SERIES

Connector for SD (Secure Digital) Card

F-23

Specifications and dimensions are subject to change without notice.

SDC03-09-



D (Reverse Type)

Printed Circuit Board Layout (Component Side View)

123456 87

28.5(1.122)

Ref.1(0.039)

22±0.05(0.866±0.002)

2.925±0.05

(0.115±0.002)

9.375±0.05

(0.369±0.002)

1.2±0.05

(0.047±0.002)

7X2.5=17.5±0.05

(0.689±0.002)

7.5(0.295)(Card lock position)

Ref. 6(0.236)(Card push stroke)

Lot No.

Center line for card

12.5(0.492)(Card eject position)

Center line for card

2-1.2±0.05

(0.047±0.002)

1(0.039)

15.05(0.593)

22.5(0.886)

12.3(0.484) 3.2(0.126)

27.9(1.098)

21.61(0.851)

7X2.5=17.5(0.689)

9.375

(0.369)

1.62

(0.064)

2.5

(0.098)

26.45(1.041)

22.6(0.890)

24.2(0.953)

2.3

(0.091)

1.6

(0.063)

0.2

(0.008)

2.65±0.15

(0.104±0.006)

2.4

(0.094)

2.5±0.05

(0.098±0.002)

5.3±0.05

(0.209±0.002)

14.25±0.05

(0.561±0.002) 2.55±0.05

(0.100±0.002)

1.1±0.05

(0.043±0.002)

1.65±0.05

(0.065±0.002)

0.6±0.05

(0.024±0.002)

26.75±0.05(1.053±0.002)

2.6±0.05

(0.102±0.002)

0.45±0.05

(0.018±0.002)

1.5±0.05

(0.059±0.002)

1.9±0.05

(0.075±0.002)

1.3±0.05

(0.051±0.002)

1.7±0.05

(0.067±0.002)

14.03±0.05

(0.552±0.002)

14.65±0.05

(0.577±0.002)

22.5±0.05

(0.886±0.002)

27.13±0.05

(1.068±0.002)

13.55±0.05

(0.533±0.002)

1.62±0.05

(0.064±0.002)

1.65±0.05

(0.065±0.002)

2.1±0.05

(0.083±0.002)

1.4±0.05

(0.055±0.002)

1.55±0.05

(0.061±0.002)

13.95±0.05

(0.549±0.002)

26.6±0.05

(1.047±0.002)

13±0.05

(0.512±0.002)

1.6±0.05

(0.063±0.002)

0.45±0.05

(0.018±0.002)

1.5±0.05

(

0.059±0.002

)

2.5±0.05

(

0.098±0.002

)

2.25(0.089)

Card detection SW

Common SW

Write protection SW

14.5(0.571)

Ref. 2.1(0.083)

Ref. 2.4(0.094)

1138D

876543219

SDC03-09-0D

∗

Diagonal line: Pattern prohibition area

∗ : Apply for SDC03-09-1D only

Without IC card

With IC card and

"Write Enable"

position in card

With IC card and

"Write Protect"

position in card

Condition Write Protection SW

and Common SW

Card detection SW

and Common SW

OFF OFF

OFFON

ON ON

Switch Mechanism

Reverse Type

Part Number

SDC03-09-0D

SDC03-09-1D

0.35

(0.014)

Product Table/Dimensions

SDC02/03 SERIES

Connector for SD (Secure Digital) Card

Unit:mm(inch)

F-24