PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT MALE CONTACT ce ' A ~ | | 0.040 & i aN (1,02) ro es eh te f yr Lo170, 0.170 | (4,32) (4,32) WIRE SIZE WIRE SIZE PART NO. | WIRE SIZE A Bg | ce PART NO. | AWav(mm?) A BS |} cs 20/22/24 0.612 0.045 0.066 20/22/24 0.618 0.045 | 0.066 FE7S200 |65/0,3/0,25)| (16,84)| (1,14) | (1,68) MC7520D | (6,570,3/0,25)| (15,70)| (1.14) | (1,68) FC7526D 26/28/30 | 0.612 | 0.026 | 0.066 Mc7526D 26/28/30 | 0.618 | 0.026 | 0.066 (0,12/0,08/0,05) ](15,54)1 (0,66) | (1,68) (0,12/0,08/0,05) |(15,70)| (0,66) ] (1,68) FEMALE CONTACT MALE CONTACT 18 AWG (1,0 mm?) MAX. 18 AWG (1,0 mm?) MAX. 0.055 @ (1,40) 0.883 _ 0.927 (22,43) (23,55) 0.0558 (1,40) 4 coe 1 < = | Oo | ' L, 0.086 & 0.170, | 0.040 @ I.0.170 , (2,18) (4,32) (1,02) 4,32) (0.18) FC7518D MC7518D Material - Phosphor bronze. Material - . Plating - Gold flash over nickel. ateria Brass Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter R after the con- tact part number, such as MC7526DR for a male contact and FC7520DR for a female contact. DIMENSIONS ARE IN INCHES (MILLIMETERS) B . i t . ALL DIMENSIONS SUBJECT TO CHANGE : Enlarged section of plastic contact carriers 13 9) POSITRONIC (| INDUSTRIES, INC. rs M@ 9005338 0000057 44311 Soli-D Series PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Removable Professional Quality Connectors IEC Publication 807-3 Performance Level Two CSA Recognized Te wee var) Telecommunication U.L. File #14098 U.L. Recognized ae ic Ki Soli-D Series connectors are professional quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. This crimp removable contact connector will meet the Performance Level Two requirements of IEC 807-3. Soli-D Series connectors utilize precision machined contacts with closed barrel, crimp terminations. The female contact features the Robi-Contact open entry design. Other contact terminations such as solder and printed board terminations are also available. The removable contact feature provides for rapid assembly and permits contact repairs on wiring changes. Five standard contact variants are offered in arrangements of 9, 15, 25, 37 and 50 contacts. Soli-D Series connectors are mateable and compatible with all D-Subminiature connectors conforming to IEC 807-2, IEC 807-3 and MIL-C-24308. Awide assortment of cable support hoods and locking systems is available from stock. Soli-D Series connectors conform to EIA RS 232 and RS 449, and CCITT X.24 interface connection requirements. SOLI-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: Insulator: Glass filled nylon resin, UL 94V-0, black color. Contacts: Maile contactsprecision machined brass alloy. Female contactsprecision machined high tensile phosphor bronze. Professional quality gold flash over nickel piate. Other finishes available upon request. Contact Plating: Shells: Steel or brass with tin plate; zinc plate with dichromate seal. Nylon plastic, or brass, zinc plate with dichromate seal. Phosphor bronze with tin plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Mounting Spacers: Push-On Fasteners: Jackscrew Systems: Hoods: steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: 7.5 amperes nominal. Initial Contact 0.008 ohms maximum. Resistance: Proof Voltage: 1000 Vr.m.s. Insulator Resistance: 5 G ohms. Clearance and Creepage 0.039 inch (1,0mm). Distance (minimum): Working Voltage: CLIMATIC CHARACTERISTICS: 55C to + 125C. 10 days. 300 Vr.m.s. Temperature Range: Damp Heat, Steady State: a aa POSITRONIC INDUSTRIES, INC. Mi 9005334 0000055 b70 = Thermoplastic UL 94V-0. Composite, brass or MECHANICAL CHARACTERISTICS: Removable Contacts: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contacts, male0.040 inch (1,02mm) diameter; female Robi- Contact open entry design. Contact Retention In 6 Ibs. (27 N). Insulator: Contact Terminations: Closed barrel crimp, wire sizes 18 AWG (1,0mm?) through 32 AWG (0,03mmz?). Also, solder and straight printed board mount terminations. Shells: Male shells may be dimpled for EMI/ESD ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Rapid installation push-on fasteners. Jackscrews and vibration locking systems. 500 operations minimum per IEC 512-5. Printed Board Mount: Locking Systems: Mechanical Operations:PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert 0 When Step Is Not Used STEP 1} 2/3 4 5 6 7 8 9 SD| 25 F 3 S6 0 T6 | X STEP 1 Basic Series SD Series STEP 2 SD Connector Variants 9, 15, 25, 37, 50 STEP 3 Connector Gender M Male F Female STEP 4 Type of Contacts 0 - Order Contacts separately 3 Solder, Straight Printed Board Mount with 0.125 (3,18) Tail Length 32 Solder, Straight Printed Board Mount with 0.188 (4,78) Tail Length *STEP 5 Mounting Style 0 - Mounting Hole, 0.120 (3,05) @ F Float Mounts, Universal P - Threaded Post, Brass, 0.437 (11,10) Length P2 Threaded Post, Nylon, 0.437 (11,10) Length S Swaged Spacer, 4-40 Threads, 0.437 (11,10) Length $2 Swaged Spacer, 4-40 Threads, 0.125 (3,18) Length S5 ~ Swaged Locknut, 4-40 Threads S6 Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.437 (11,10) Length STEP 9 Special Options Consult Sales Department STEP 8 Shell Options 0 -Zinc Plated with Dichromate Seal X -Tin Plated Z Tin Plated and Dimpled *STEP 7 Locking and Polarizing Systems 0 None V3 Lock Tab, connector front panel mounted V5 ~Lock Tab, connector rear panel mounted VL ~Lock Lever, used with Hoods Only T ~Fixed Female Jackscrews 72 Fixed Female Jackscrews T6 Fixed Male and Female Polarized Jackscrews E ~- Rotating Male Jackscrews E2 ~ Rotating Male Screw Locks E6 Rotating Male and Female Polarized - Jackscrews *STEP 6 Hoods 0 None J - Hood, Top Opening, Plastic L Hood, Side Opening, Plastic Y6 Hood, Top Opening, Plastic with Rotating Male Jackscrews Y Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews Z Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews H Hood, Top Opening, Metal G Hood, EMI/RFI, Metal W_ Hood, Top or Side Opening, Plastic *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. Y and Y6 Options are not available for use with 9 and 15 contact SD connectors; specify hood type Z. SD SERIES CRIMP AND SOLDER CONTACT TERMINATIONS TERMINATION|CONTACT | WIRE SIZE |FEMALE PART] MALE PART TYPE SIZE AWG/(mm?) NUMBER | NUMBER CRIMP 20 OHSS FC7520D | MC7520D CRIMP 26 (OBO BOTS) Fo7526D | MC7526D SOLDER 20 AES FS7520D | MS7520D SOLDER 26 (OS SSIS) FS7526D | MS7526D @@ 69005336 O0000be 600 Nn f| POSITRONIC 18 INDUSTRIES, INC. Poem