T Features RoHS compliant* and halogen free** * Q2 RoH 00 S CO an M d PL IA N Compliant with AEC-Q200 Rev-C- Stress AE C- Test Qualification for Passive Components Fast tripping resettable circuit protection Surface mount packaging for automated assembly Small footprint size (1210) Agency recognition: MF-USMF Series - PTC Resettable Fuses Electrical Characteristics Model MF-USMF005 MF-USMF010 MF-USMF020 MF-USMF035 MF-USMF050 MF-USMF075 MF-USMF110 MF-USMF150 MF-USMF175 MF-USMF175X V max. Volts I max. Amps 30 30 30 6 13.2 6 6 6 6 6 10 10 10 40 40 40 40 40 40 40 Ihold Itrip Amperes at 23 C Hold Trip 0.05 0.15 0.10 0.30 0.20 0.40 0.35 0.75 0.50 1.00 0.75 1.50 1.10 2.20 1.50 3.00 1.75 3.50 1.75 3.50 Resistance Ohms at 23 C RMin. R1Max. 2.800 50.000 0.800 15.000 0.400 5.000 0.200 1.300 0.180 0.900 0.070 0.450 0.050 0.210 0.030 0.110 0.020 0.090 0.020 0.090 Amperes at 23 C Seconds at 23 C 0.25 0.50 8.00 8.00 8.00 8.00 5.00 5.00 8.00 1.50 0.60 0.02 0.20 0.10 0.10 1.00 5.00 1.00 Tripped Power Dissipation Watts at 23 C Typ. 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 8.00 1.00 0.7 Max. Time To Trip Environmental Characteristics Operating Temperature......................................... -40 C to +85 C Passive Aging ....................................................... +85 C, 1000 hours ............................................... 5 % typical resistance change Humidity Aging...................................................... +85 C, 85 % R.H. 1000 hours ............................. 5 % typical resistance change Thermal Shock ..................................................... +85 C to -40 C, 20 times .................................... 10 % typical resistance change Solvent Resistance ............................................... MIL-STD-202, Method 215 ................................... No change Vibration ............................................................... MIL-STD-883C, Method 2007.1,........................... No change Condition A Moisture Sensitivity Level (MSL) .......................... Level 1 ..................................... Class 6 Test Procedures And Requirements For Model MF-LSMF Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description Resistance ............................................................ In still air @ 23 C ................................................. Rmin R R1max Time to Trip ........................................................... ......................... T max. time to trip (seconds) Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning Trip Endurance ..................................................... Vmax, 48 hours..................................................... No arcing or burning Solderability .......................................................... ANSI/J-STD-002 ................................................... 95 % min. coverage UL File Number .................................................... No. E174545, or click here ....................................... 2057213, or click here WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns follows the prevailing definition of "halogen free" in the industry. Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.Specifications are subject to change without notice. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications Game consoles IEEE 1394 ports PC motherboards Mobile phones USB port protection - USB 2.0, 3.0 & OTG Digital cameras HDMI 1.4 Source protection MF-USMF Series - PTC Resettable Fuses Product Dimensions A Model Min. 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) MF-USMF005 MF-USMF010 MF-USMF020 MF-USMF035 MF-USMF050 MF-USMF075 MF-USMF110 MF-USMF150 MF-USMF175X MF-USMF175X Max. 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) Min. 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) 2.35 (0.093) B Max. 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) Min. 0.80 (0.031) 0.80 (0.031) 0.80 (0.031) 0.55 (0.022) 0.55 (0.022) 0.55 (0.022) 0.55 (0.022) 0.40 (0.016) C Max. 1.1 (0.043) 1.1 (0.043) 1.1 (0.043) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) 0.85 (0.033) D Min. 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 0.30 (0.012) 3.43 (0.135) 3.43 (0.135) 2.35 (0.093) 2.35 (0.093) 2.80 (0.110) 2.80 (0.110) 0.40 (0.016) 0.40 (0.016) 0.85 (0.033) 0.85 (0.033) 0.30 (0.012) 0.30 (0.012) Packaging: 3000 pcs. per reel. Top and Bottom View A DIMENSIONS: Side View Recommended Pad Layout C 1.0 0.05 (.039 .002) 1.0 0.05 (.039 .002) 2.5 0.1 (.098 .004) B 2.0 0.1 (.079 .004) MM (INCHES) Terminal material: Electroless Ni under immersion Au Termination pad solderability: Meets ANSI/J-STD-002 Category 2. Recommended Storage: 40 C max./70 % RH max. D 300 Preheating Soldering Cooling Notes: * Temperature (C) 250 MF-USMF models cannot be wave soldered. * devices may not meet the performance requirements. 200 * * 150 100 Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse(R) Polymer PTC Soldering Recommendation guidelines. 50 0 160-220 10-20 120 Time (seconds) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-USMF Series - PTC Resettable Fuses Thermal Derating Chart - Ihold (Amps) Model MF-USMF005 -40 C 0.08 -20 C 0.07 0 C 0.06 MF-USMF010 0.15 0.13 0.12 Ambient Operating Temperature 23 C 40 C 50 C 0.05 0.04 0.04 0.10 0.09 0.08 60 C 0.03 70 C 0.03 85 C 0.02 0.07 0.06 0.05 MF-USMF020 0.32 0.28 0.24 0.20 0.18 0.16 0.14 0.12 0.10 MF-USMF035 0.51 0.46 0.40 0.34 0.30 0.27 0.24 0.22 0.18 MF-USMF050 0.76 0.66 0.58 0.48 0.42 0.38 0.35 0.29 0.23 MF-USMF075 1.10 0.97 0.86 0.72 0.64 0.58 0.55 0.47 0.39 MF-USMF110 1.60 1.42 1.26 1.10 0.94 0.86 0.80 0.70 0.58 MF-USMF150 2.30 2.02 1.76 1.43 1.24 1.11 1.00 0.85 0.65 MF-USMF175 2.80 2.45 2.10 1.75 1.55 1.45 1.35 1.25 1.10 MF-USMF175X 2.80 2.45 2.10 1.75 1.55 1.45 1.35 1.25 1.10 Typical Time to Trip at 23 C How to Order MF - USMF 010 X - 2 100 MF-USMF075 MF-USMF020 MF-USMF035 MF-USMF010 Time to Trip (Seconds) 10 (R) Multifuse Product Designator Series USMF = 1210 Surface Mount Component Hold Current, Ihold 005-175 (0.05-1.75 Amps) Multifuse(R) freeXpansionTM Design Packaging Packaged per EIA 481-1 -2 = Tape and Reel MF-USMF110 MF-USMF150 MF-USMF050 MF-USMF175 & MF-USMF175X 1 MF-USMF005 0.1 Typical Part Marking 0.01 Represents total content. Layout may vary. 0.001 0.1 1 10 100 UNDERSCORE SIGNIFIES HALOGEN FREE COMPLIANCE Fault Current (Amps) The Time to Trip curves represent typical performance of a device in a simulated application 6 A PART IDENTIFICATION: MF-USMF005 = 0 MF-USMF010 = 1 MF-USMF020 = 2 MF-USMF035 = 3 MF-USMF050 = 4 MF-USMF075 = 5 MF-USMF110 = 6 MF-USMF150 = 8 MF-USMF175 = 9 MF-USMF175X = 9 BIWEEKLY DATE CODE: WEEK 1 AND 2 = A WEEK 51 AND 52 = Z MF-USMF SERIES, REV. R, 11/18 "freeXpansion Design" is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MF-USMF Series Tape and Reel Specifications MF-USMF Series per EIA 481-2 8.0 0.3 (0.315 0.012) 4.0 0.1 (0.157 0.004) 4.0 0.1 (0.157 0.004) 2.0 0.05 (0.079 0.002) 2.76 0.10 (0.109 0.004) 3.50 0.10 (0.138 0.004) 4.35 (0.171) 1.5 + 0.1/-0.0 (0.059 + 0.004/-0) 3.5 0.05 (0.138 + 0.002) 1.75 0.10 (0.069 0.004) 6.25 (0.246) 0.6 (0.024) 0.1 (0.004) 1.07 0.10 (0.042 0.004) 390 (15.35) 160 (6.30) Tape Dimensions W P0 P1 P2 A0 B0 B1 max. D0 F E1 E2 min. T max. T1 max. K0 Leader min. Trailer min. Reel Dimensions 185 (7.283) 50 (1.97) 8.4 + 1.5/ -0.0 (0.331 + 0.059/-0) 14.4 (0.567) A max. N min. W1 W2 max. DIMENSIONS: T D0 P2 E1 MM (INCHES) W2(MEASURED AT HUB) COVER TAPE F E2 W B1 A N(HUB DIA.) B0 K0 T1 P1 A0 W1(MEASURED AT HUB) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[ and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)WYVK\J[PUH\ZLYHWWSPJH[PVUTH]HY MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ(R) product with other components PU[OL\ZLYZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ(R) WYVK\J[HSZVJHUHUKKV]HYPUKPLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH]HYV]LY[PTL<ZLYZZOV\SKHS^HZ]LYPM the actual performance of the Bourns(R)WYVK\J[PU[OLPYZWLJPAJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPLYLUJLZIL[^LLUSHIVYH[VYHUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\YUZOHZL_WSPJP[SKLZPNUH[LKHUPUKP]PK\HS)V\YUZ(R) product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\SHYX\HSPAJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU MHPS\YLVMHUPUKP]PK\HS)V\YUZ(R)WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[YZ[HUKHYKVYWHY[PJ\SHYX\HSPAJH[PVU<ZLYZ of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns(R)WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN HWWSPJH[PVUZUVYPUHUV[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTHYLZ\S[PUWLYZVUHSPUQ\YKLH[OVYZL]LYLWYVWLY[ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns(R)WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[ [OL\ZLYZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PALKI[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSSLX\P]HSLU[JSHZZPAJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ )V\YUZL_WYLZZSPKLU[PALZ[OVZL)V\YUZ(R)Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO WYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSSHWWYV]LKPU^YP[PUNI[^V H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R)Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPa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ourns(R)Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS VYHUV[OLYNLULYHSSLX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY \ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZSPKLU[PALZ)V\YUZ(R) standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[ZKH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK(WWSPJH[PVUZ<USLZZL_WYLZZSHUKZWLJPAJHSS HWWYV]LKPU^YP[PUNI[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLIJHZLIHZPZ\ZLVMHUV[OLY)V\YUZ(R) standard WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[ the user's sole risk. ;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)J\Z[VTWYVK\J[ZHYLZWLJPHSSKLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)WYVK\J[ZVY[LJOUVSVNMVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\ZL Bourns(R)WYVK\J[ZVY[LJOUVSVNPUHUMHJPSP[^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\SH[PVUZ-\Y[OLY)V\YUZ(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without WYPVYH\[OVYPa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bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf *9