R Short Barrel Inductive Prox E2E 3-WIRE DC Short Barrel 3-Wire Prox Sensors Meet IP67 H Thick nickel-plated brass barrel has wrench flats for easy installation H Solid potted internal circuitry withstands shocks and water washdown to IP67 H High visibility indicator H Miniature and standard sizes Ordering Information WHEN ORDERING, PLEASE NOTE: Omron has added the suffix "-N" to standard size E2E part numbers for ordering purposes only; the suffix "-N" will not appear on the product. J PREWIRED MINIATURE SENSORS Type yp Size Shielded 4 mm dia. M5 5.4 mm dia. Sensing g distance 0 8 mm 0.8 1 mm 1 mm Output p configuration Part number NO NC NPN E2E-CR8C1 E2E-CR8C2 PNP E2E-CR8B1 E2E-CR8B2 NPN E2E-X1C1 E2E-X1C2 PNP E2E-X1B1 E2E-X1B2 NPN E2E-C1C1 E2E-C1C2 PNP E2E-C1B1 E2E-C1B2 J PREWIRED SHIELDED STANDARD SENSORS Type yp Size Shielded M8 M12 M18 M30 Sensing g distance 1 5 mm 1.5 2 mm 5 mm 10 mm Output p configuration Part number NO NC NPN E2E-X1R5E1-N E2E-X1R5E2-N PNP E2E-X1R5F1-N E2E-X1R5F2-N NPN E2E-X2E1-N E2E-X2E2-N PNP E2E-X2F1-N E2E-X2F2-N NPN E2E-X5E1-N E2E-X5E2-N PNP E2E-X5F1-N E2E-X5F2-N NPN E2E-X10E1-N E2E-X10E2-N PNP E2E-X10F1-N E2E-X10F2-N Note: 1. A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X5E15-N). 2. E2E sensors with robotic cable are available. Add a "-R" in the part number (e.g., E2E-X5E1-R-N). 2 E2E 3-Wire DC E2E 3-Wire DC J PREWIRED UNSHIELDED STANDARD SENSORS Type yp Size Unshielded M8 M12 Sensing g distance 2 mm 5 mm M18 10 mm M30 18 mm Output p configuration Part number NO NC NPN E2E-X2ME1-N E2E-X2ME2-N PNP E2E-X2MF1-N E2E-X2MF2-N NPN E2E-X5ME1-N E2E-X5ME2-N PNP E2E-X5MF1-N E2E-X5MF2-N NPN E2E-X10ME1-N E2E-X10ME2-N PNP E2E-X10MF1-N E2E-X10MF2-N NPN E2E-X18ME1-N E2E-X18ME2-N PNP E2E-X18MF1-N E2E-X18MF2-N Note: 1. A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X5E15-N). 2. E2E sensors with robotic cable are available. Add a "-R" in the part number (e.g., E2E-X5E1-R-N). J SENSORS WITH BUILT-IN M12 MICROCHANGER CONNECTOR Type yp Size Shielded M8 M12 M18 Sensing g distance 1 5 mm 1.5 2 mm 5 mm M30 Unshielded M8 M12 10 mm 2 mm 5 mm M18 10 mm M30 18 mm Output p configuration Part number NO NC NPN E2E-X1R5E1-M1-N E2E-X1R5E2-M1-N PNP E2E-X1R5F1-M1-N E2E-X1R5F2-M1-N NPN E2E-X2E1-M1-N E2E-X2E2-M1-N PNP E2E-X2F1-M1-N E2E-X2F2-M1-N NPN E2E-X5E1-M1-N E2E-X5E2-M1-N PNP E2E-X5F1-M1-N E2E-X5F2-M1-N NPN E2E-X10E1-M1-N E2E-X10E2-M1-N PNP E2E-X10F1-M1-N E2E-X10F2-M1-N NPN E2E-X2ME1-M1-N E2E-X2ME2-M1-N PNP E2E-X2MF1-M1-N E2E-X2MF2-M1-N NPN E2E-X5ME1-M1-N E2E-X5ME2-M1-N PNP E2E-X5MF1-M1-N E2E-X5MF2-M1-N NPN E2E-X10ME1-M1-N E2E-X10ME2-M1-N PNP E2E-X10MF1-M1-N E2E-X10MF2-M1-N NPN E2E-X18ME1-M1-N E2E-X18ME2-M1-N PNP E2E-X18MF1-M1-N E2E-X18MF2-M1-N Note: Connector cordsets: For MicroChangeR models, use OMRON Y96E-4jDj. J SENSORS WITH BUILT-IN M8 NANOCHANGER CONNECTOR Type yp Size Shielded M8 Unshielded M8 Sensing g distance 1.5 mm 2 mm Output p configuration Part number NO NC NPN E2E-X1R5E1-M3 E2E-X1R5E2-M3 PNP E2E-X1R5F1-M3 E2E-X1R5F2-M3 NPN E2E-X2ME1-M3 E2E-X2ME2-M3 PNP E2E-X2MF1-M3 E2E-X2MF2-M3 Note: Connector cordsets: For NanoChangeR models, use OMRON X3SF-M42j-40j-R or Brad Harrison equivalent. 3 E2E 3-Wire DC E2E 3-Wire DC J ACCESSORIES Description Mounting g brackets Silicone rubber covers for shielded sensors Part number Fits M8 size sensors Y92E-B8 Fits M12 size sensors Y92E-B12 Fits M18 size sensors Y92E-B18 Fits M30 size sensors Y92E-B30 Fits M12 size sensors Y92E-E12-2 Fits M18 size sensors Y92E-E18-2 Fits M30 size sensors Y92E-E30-2 J REPLACEMENT PARTS Description Mounting g hardware including g one pair p of metal nuts and one washer Part number Fits M5 size sensors M5-MHWS Fits M8 size sensors M8-MHWS Fits M12 size sensors M12-MHWS Fits M18 size sensors M18-MHWS Fits M30 size sensors M30-MHWS 4 E2E 3-Wire DC E2E 3-Wire DC Specifications J MINIATURE SENSORS Part number E2E-CR8jj E2E-X1jj E2E-C1jj Size 4 mm (0.16 in) dia. M5 5.5 mm (0.21 in) dia. Type Shielded Sensing distance 0.8 mm (0.03 in) 15% Supply voltage 10 to 30 VDC, 10% max. permissible ripple peak to peak Current consumption 17 mA max. Sensing object Magnetic metals Setting distance 0 to 0.5 mm (0 to 0.02 in) Standard object (mild steel, L x W x H) 5 x 5 x 1 mm (0.2 x 0.2 x 0.04 in) Differential travel 15% max. of effective distance Response frequency 3 kHz Control output Operation C1 models: C2 models: B1 models: B1 models: Max. load 100 mA switching capacity Max. on-state voltage drop 2 VDC 1 mm (0.04 in) 15% 0 to 7 mm (0 to 0.03 in) 8 x 8 x 1 mm (0.3 x 0.3 x 0.04 in) NPN-NO open collector NPN-NC open collector PNP-NO open collector PNP-NC open collector Circuit protection DC power supply reverse polarity Indicators Operation indicator (red LED) Ambient temperature Operating --25C to 70C (--13F to 158F) with no icing Ambient humidity Operating 35% to 95% Vibration resistance 10 to 55 Hz, 1.5 mm (0.06 in) double amplitude Shock resistance Approx. 50 G's Enclosure rating UL -- NEMA 1, 3, 4, 6, 12, 13 IEC 144 IP67 Weight with cable Approx. 30 g (1.1 oz.) Materials Housing Stainless steel Sensing face Plastic PBT Cable sheath Polyvinyl chloride Nickel-plated brass 5 Nickel-plated brass E2E 3-Wire DC E2E 3-Wire DC J STANDARD SIZE SENSORS Part number E2E-X1R5 Ej/Fj-N Size M8 Type Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded Sensing distance 1.5 mm (0.06 in) 10% 2 mm (0.08 in) 10% 2 mm (0.08 in) 10% 5 mm (0.20 in) 10% 5 mm (0.20 in) 10% 10 mm (0.39 in) 10% 10 mm (0.39 in) 10% 18 mm (0.71 in) 10% Supply voltage (operating voltage range) (See Note 1.) 12 to 24 VDC, ripple (p-p): 10% max., (10 to 40 VDC) Current consumption 13 mA max. Sensing object Magnetic metals (refer to Engineering Data for non-magnetic metals) Setting distance 0 to 1.2 mm (0 to 0.05 in) 0 to 1.6 mm (0 to 0.06 in) 0 to 1.6 mm (0 to 0.06 in) 0 to 4.0 mm (0 to 0.16 in) 0 to 4.0 mm (0 to 0.16 in) 0 to 8.0 mm (0 to 0.31 in) 0 to 8.0 mm (0 to 0.31 in) 0 to 14.0 mm (0 to 0.55 in) Standard object (mild steel) 8x8x 1 mm (0.31 x 0.31 x 0.04 in) 12 x 12 x 1 mm (0.47 x 0.47 x 0.04 in) 12 x 12 x 1 mm (0.47 x 0.47 x 0.04 in) 15 x 15 x 1 mm (0.59 x 0.59 x 0.04 in) 18 x 18 x 1 mm (0.71 x 0.71 x 0.04 in) 30 x 30 x 1 mm (1.18 x 1.18 x 0.04 in) 30 x 30 x 1 mm (1.18 x 1.18 x 0.04 in) 54 x 54 x 1 mm (2.13 x 2.13 x 0.04 in) Differential travel 10% max. of sensing distance Response frequency 2.0 kHz 0.4 kHz 0.6 kHz 0.2 kHz 0.4 kHz 0.1 kHz Operation (with sensing object approaching) E1 models: Load ON E2 models: Load OFF Control output (switching capacity) 200 mA max. Circuit protection Reverse connection protection, surge absorber, load short-circuit protection Indicator Operation indicator (red LED) Ambient temperature (See Note 2.) Operating: --40C to 85C (--40F to 185F) with no icing Ambient humidity Operating: 35% to 95% Temperature influence 15% max. of sensing distance at 23C in temperature range of --40C to 85C (--40F to 185F) 10% max. of sensing distance at 23C in temperature range of --25C to 70C (--13F to 158F) Voltage influence 1% max. of sensing distance in rated voltage range 15% Residual voltage 2.0 V max. (under load current of 200 mA with cable length of 2 m) Insulation resistance 50 M min. (at 500 VDC) between current carry parts and case Dielectric strength 1,000 VAC for 1 min. between current carry parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z axes Shock resistance 500 m/s2 (approx. 50G) for 10 times each in X, Y, and Z axes Enclosure rating IEC IP67 NEMA 1, 4, 6, 12, 13 Weight g Pre-wired Approx. 45 g Connector --- Body Stainless steel Sensing face PBT Material E2E-X2ME j/ Fj-N E2E-X2Ej / Fj-N E2E-X5ME j/Fj-N M12 0.8 kHz 1.5 kHz E2E-X5Ej / Fj-N E2E-X10M Ej/Fj-N M18 E2E-X10E j/ Fj-N E2E-X18M Ej/ Fj-N M30 1,000 m/s2 (approx. 50G) for 10 times each in X, Y, and Z axes 500 m/s2 (approx. 50G) for E2E-X5M Approx. 120 g Approx. 25 g Approx. 160 g Approx. 270 g Approx. 45 g Approx. 125 g Approx. 124 g Brass Note: 1. E2E models with an M18 or M30 connector operate at a non-smoothed, all-wave rectified, mean voltage range of 24 VDC 20%. 2. When using an E2E with an M8 connector at an ambient temperature range between 70C and 85C (158F and 185F), supply 10 to 30 VDC to the E2E and make sure that the E2E has a control output of 100 mA maximum. 6