P. 70, P. 100, P. 140, P. 200 Vishay Draloric RF Power Plate Capacitors with Contoured Rim, Class 1 Ceramic FEATURES * Low losses * High reliability * Wide range of capacitance values APPLICATIONS * Induction and dielectric heating * Antenna units * Filter, bypass and coupling circuits CAPACITANCE RANGE 25 pF to 6.0 nF QUICK REFERENCE DATA CAPACITANCE TOLERANCE DESCRIPTION VALUE 10 pF: 2 pF; 1 pF; 0.5 pF 1 10 pF: 20 %; 10 %; 5 % Ceramic Class Ceramic Dielectric Type Voltage (Vp) R7, R16, R42, R85, R230 PA 70 PC 70 PD 70 PA 100 PC 100 PD 100 PE 100 PA 140 PC 140 PD 140 PE 140 PA 200 PC 200 PD 200 PE 200 11 000, 12 000, 13 000, 14 000 11 000, 13 000, 14 000, 15 000 12 000, 13 000, 14 000, 15 000, 16 000 12 000, 13 000, 14 000, 15 000 CERAMIC DIELECTRIC * R7 (TCC + 100 ppm/K) * R16 (TCC + 100 ppm/K) * R42 (TCC - 250 ppm/K) * R85 (TCC - 750 ppm/K) * R230 (TCC - 750 ppm/K) Min. Capacitance (pF) 25 50 100 160 RATED VOLTAGE Max. Capacitance (pF) 800 1600 3000 6000 * 11 kVp Mounting Screw terminal/band terminal * 13 kVp MATERIAL Capacitor elements made from Class 1 ceramic dielectric with noble metal electrodes. Flexible connection terminals made from copper/brass, silver plated, to allow for series and parallel interconnection Noble metal electrodes and terminals are protective lacquered. The contoured insulating rim is additionally glazed MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo. Two screws and washers (PD, PE) * 14 kVp * 15 kVp * 16 kVp DIELECTRIC STRENGTH TEST 200 % of rated voltage, 50 Hz FINISH ACCESSORIES ADDED * 12 kVp DISSIPATION FACTOR R7: Max. 0.07 % R16: Max. 0.04 % R42, R85, R230: Max. 0.05 % Measuring frequencies: 1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF) INSULATION RESISTANCE Min. 10 000 M (at 25 C) OPERATING TEMPERATURE RANGE - 55 C to + 100 C Document Number: 22082 Revision: 10-May-11 For technical questions, contact: powcap@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P. 70, P. 100, P. 140, P. 200 Vishay Draloric RF Power Plate Capacitors with Contoured Rim, Class 1 Ceramic SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) 14 15 RATED CURRENT (ARMS) PD PA, PC 16 10 TYPE P. 70 P#0070WJ250##BF1 P#0070WJ300##BF1 25 R7 30 P#0070WJ400##BG1 P#0070WJ500##BG1 P#0070WJ600##BG1 40 50 R16 14 P#0070WF800##BG1 80 12 P#0070WJ101##BH1 100 14 P#0070WH121##BH1 R42 120 P#0070WH161##BH1 160 P#0070WJ201##BJ1 200 P#0070WJ251##BJ1 250 P#0070WJ301##BJ1 300 P#0070WH401##BJ1 R85 20 60 20 13 14 20 400 13 P#0070WH501##BJ1 500 P#0070WF601##BJ1 600 12 P#0070WE801##BJ1 800 11 SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) 15 30 RATED CURRENT (ARMS) PE PD PA, PC 35 25 15 TYPE P. 100 P#0100BJ500##BF1 P#0100BJ600##BF1 R7 50 60 P#0100BJ800##BG1 80 P#0100BJ101##BG1 100 P#0100BJ121##BG1 R16 P#0100WH161##BG1 160 P#0100BJ201##BH1 15 40 120 13 200 15 250 14 P#0100WH301##BH1 300 13 P#0100WJ401##BJ1 400 P#0100WJ501##BJ1 500 P#0100WJ601##BJ1 600 P#0100WJ251##BH1 P#0100WJ801##BJ1 R42 R85 14 800 P#0102WH102##BJ1 1000 P#0100WH122##BJ1 1200 P#0100WE162##BJ1 1600 40 40 13 11 Notes * # 2nd digit: Code letter of terminal version A, C, D, E * ## 14th to 15th digit: Capacitance tolerance code 20 % = 38; 10 % = 36; 5 % = 33 (1) The surface temperature during operation must not exceed + 100 C www.vishay.com 2 For technical questions, contact: powcap@vishay.com Document Number: 22082 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P. 70, P. 100, P. 140, P. 200 RF Power Plate Capacitors with Contoured Rim, Class 1 Ceramic Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) 15 67.5 RATED CURRENT (ARMS) PE PD PA, PC 45 30 20 45 (2) (2) TYPE P. 140 P#0140BJ101##BF1 P#0140BJ121##BF1 P#0140BJ161##BG1 P#0140BJ201##BG1 P#0140BJ251##BG1 P#0140WJ301##BG1 P#0140BJ401##BH1 P#0140WJ501##BH1 P#0140WH601##BH1 P#0140WH801##BH1 P#0140WJ102##BJ1 P#0140WJ122##BJ1 P#0140WJ162##BJ1 P#0140WH202##BJ1 P#0140WH252##BJ1 P#0140WF302##BJ1 P#0140WL302##BK1 R7 R16 R42 R85 R230 100 120 160 200 250 300 400 500 600 800 1000 1200 1600 2000 2500 3000 3000 15 90 14 15 14 90 13 14 90 13 12 16 90 RATED VOLTAGE (kVP) RATED POWER (1) (kvar) SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED CURRENT (ARMS) PE PD PA, PC 60 40 25 TYPE P. 200 P#0200BJ161##BF1 P#0200BJ201##BF1 P#0200BJ251##BF1 P#0200WJ301##BF1 P#0200WF401##BF1 P#0200BJ501##BG1 P#0200BJ601##BG1 P#0200BJ801##BH1 P#0200WJ102##BH1 P#0200WJ122##BH1 P#0200WJ162##BH1 P#0200WJ202##BJ1 P#0200WJ252##BJ1 P#0200WJ302##BJ1 P#0200WH402##BJ1 P#0200WH502##BJ1 P#0200WF602##BJ1 R7 R16 R42 R85 160 200 250 300 400 500 600 800 1000 1200 1600 2000 2500 3000 4000 5000 6000 15 112 14 12 15 150 15 14 150 14 150 13 12 Notes * # 2nd digit: Code letter of terminal version A, C, D, E * ## 14th to 15th digit: Capacitance tolerance code 20 % = 38; 10 % = 36; 5 % = 33 (1) The surface temperature during operation must not exceed + 100 C (2) Only PE type available Document Number: 22082 Revision: 10-May-11 For technical questions, contact: powcap@vishay.com www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P. 70, P. 100, P. 140, P. 200 RF Power Plate Capacitors with Contoured Rim, Class 1 Ceramic Vishay Draloric DIMENSIONS in millimeters (inches) PD PE Thread size Thread size 3 finger terminals 6 finger terminals W1 W1 not available as PE 70 Band terminals and ceramic base D PA PC L2 H L1 5.0 (0.2) 66 2 (2.60 0.08) 0.3 (0.012) 10 (0.39) Band terminals 85 30 1 (1.18 0.04) (3.35) W2 13 (0.51) 50 (1.97) 6.4 + 0.4 (0.25 + 0.02) TYPE Diameter Dmax. Thread size Width W1 (2) PA 100 PC 100 PD 100 PE 100 PA 140 PC 140 PD 140 PE 140 PA 200 PC 200 PD 200 PE 200 70 (2.76) 100 (3.52) 140 (5.51) 200 (7.87) M6 M8 M8 M10 35 1 (1.38 0.04) 40 1 (1.58 0.04) 40 1 (1.58 0.04) 45 1 (1.77 0.04) PA 70 PC 70 PD 70 Width W2 (1) 30 (1.81) 30 (1.81) 30 (1.81) 32 (1.26) Height H 116 (4.57) 146 (5.75) 186 (7.32) 246 (9.69) Length L1 100 (3.94) 140 (5.51) 140 (5.51) 200 (7.87) Length L2 15 (0.59) 30 (1.18) 30 (1.18) 30 (1.18) Notes (1) Dimension W will vary depending upon capacitance 2 (2) Type PE 70 is not available www.vishay.com 4 For technical questions, contact: powcap@vishay.com Document Number: 22082 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1