Document Number: 22082 For technical questions, contact: powcap@vishay.com www.vishay.com
Revision: 10-May-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RF Power Plate Capacitors with Contoured Rim,
Class 1 Ceramic
P. 70, P. 100, P. 140, P. 200
Vishay Draloric
MATERIAL
Capacitor elements made from Class 1 ceramic dielectric
with noble metal electrodes.
Flexible connection terminals made from copper/brass,
silver plated, to allow for series and parallel interconnection
FINISH
Noble metal electrodes and terminals are protective
lacquered. The contoured insulating rim is additionally
glazed
MARKING
Type designator, capacitance value and tolerance, rated
peak voltage, ceramic material code, production date code,
manufacturer logo.
ACCESSORIES ADDED
Two screws and washers (PD, PE)
FEATURES
Low losses
High reliability
Wide range of capacitance values
APPLICATIONS
Induction and dielectric heating
Antenna units
Filter, bypass and coupling circuits
CAPACITANCE RANGE
25 pF to 6.0 nF
CAPACITANCE TOLERANCE
10 pF: ± 2 pF; ± 1 pF; ± 0.5 pF
10 pF: ± 20 %; ± 10 %; ± 5 %
CERAMIC DIELECTRIC
R7 (TCC + 100 ppm/K)
R16 (TCC + 100 ppm/K)
R42 (TCC - 250 ppm/K)
R85 (TCC - 750 ppm/K)
R230 (TCC - 750 ppm/K)
RATED VOLTAGE
•11 kV
p
•12 kV
p
•13 kV
p
•14 kV
p
•15 kV
p
•16 kV
p
DIELECTRIC STRENGTH TEST
200 % of rated voltage, 50 Hz
DISSIPATION FACTOR
R7: Max. 0.07 %
R16: Max. 0.04 %
R42, R85, R230: Max. 0.05 %
Measuring frequencies:
1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF)
INSULATION RESISTANCE
Min. 10 000 M (at 25 °C)
OPERATING TEMPERATURE RANGE
- 55 °C to + 100 °C
QUICK REFERENCE DATA
DESCRIPTION VALUE
Ceramic Class 1
Ceramic Dielectric R7, R16, R42, R85, R230
Type
PA 70
PC 70
PD 70
PA 100
PC 100
PD 100
PE 100
PA 140
PC 140
PD 140
PE 140
PA 200
PC 200
PD 200
PE 200
Voltage (Vp)
11 000,
12 000,
13 000,
14 000
11 000,
13 000,
14 000,
15 000
12 000,
13 000,
14 000,
15 000,
16 000
12 000,
13 000,
14 000,
15 000
Min. Capacitance (pF) 25 50 100 160
Max. Capacitance (pF) 800 1600 3000 6000
Mounting Screw terminal/band terminal
www.vishay.com For technical questions, contact: powcap@vishay.com Document Number: 22082
2Revision: 10-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
P. 70, P. 100, P. 140, P. 200
Vishay Draloric RF Power Plate Capacitors with Contoured Rim,
Class 1 Ceramic
Notes
• # 2
nd digit: Code letter of terminal version A, C, D, E
## 14th to 15th digit: Capacitance tolerance code ± 20 % = 38; ± 10 % = 36; ± 5 % = 33
(1) The surface temperature during operation must not exceed + 100 °C
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER CERAMIC
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
PD PA, PC
TYPE P. 70
P#0070WJ250##BF1 R7 25 14 15
16 10
P#0070WJ300##BF1 30
P#0070WJ400##BG1
R16
40
14 20
P#0070WJ500##BG1 50
P#0070WJ600##BG1 60
P#0070WF800##BG1 80 12
P#0070WJ101##BH1
R42
100 14
20P#0070WH121##BH1 120 13
P#0070WH161##BH1 160
P#0070WJ201##BJ1
R85
200
14
20
P#0070WJ251##BJ1 250
P#0070WJ301##BJ1 300
P#0070WH401##BJ1 400 13
P#0070WH501##BJ1 500
P#0070WF601##BJ1 600 12
P#0070WE801##BJ1 800 11
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER CERAMIC
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
PE PD PA, PC
TYPE P. 100
P#0100BJ500##BF1 R7 50 15 30
35 25 15
P#0100BJ600##BF1 60
P#0100BJ800##BG1
R16
80
15
40
P#0100BJ101##BG1 100
P#0100BJ121##BG1 120
P#0100WH161##BG1 160 13
P#0100BJ201##BH1
R42
200 15
40P#0100WJ251##BH1 250 14
P#0100WH301##BH1 300 13
P#0100WJ401##BJ1
R85
400
14
40
P#0100WJ501##BJ1 500
P#0100WJ601##BJ1 600
P#0100WJ801##BJ1 800
P#0102WH102##BJ1 1000 13
P#0100WH122##BJ1 1200
P#0100WE162##BJ1 1600 11
Document Number: 22082 For technical questions, contact: powcap@vishay.com www.vishay.com
Revision: 10-May-11 3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
P. 70, P. 100, P. 140, P. 200
RF Power Plate Capacitors with Contoured Rim,
Class 1 Ceramic Vishay Draloric
Notes
• # 2nd digit: Code letter of terminal version A, C, D, E
• ## 14th to 15th digit: Capacitance tolerance code ± 20 % = 38; ± 10 % = 36; ± 5 % = 33
(1) The surface temperature during operation must not exceed + 100 °C
(2) Only PE type available
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER CERAMIC
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
PE PD PA, PC
TYPE P. 140
P#0140BJ101##BF1 R7 100 15 67.5
45 30 20
P#0140BJ121##BF1 120
P#0140BJ161##BG1
R16
160
15
90
P#0140BJ201##BG1 200
P#0140BJ251##BG1 250
P#0140WJ301##BG1 300 14
P#0140BJ401##BH1
R42
400 15
90
P#0140WJ501##BH1 500 14
P#0140WH601##BH1 600 13
P#0140WH801##BH1 800
P#0140WJ102##BJ1
R85
1000
14
90
P#0140WJ122##BJ1 1200
P#0140WJ162##BJ1 1600
P#0140WH202##BJ1 2000 13
P#0140WH252##BJ1 2500
P#0140WF302##BJ1 3000 12
P#0140WL302##BK1 R230 3000 16 90 45 (2) (2)
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER CERAMIC
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
PE PD PA, PC
TYPE P. 200
P#0200BJ161##BF1
R7
160
15
112
60
40
25
P#0200BJ201##BF1 200
P#0200BJ251##BF1 250
P#0200WJ301##BF1 300 14
P#0200WF401##BF1 400 12
P#0200BJ501##BG1 R16 500 15 150
P#0200BJ601##BG1 600
P#0200BJ801##BH1
R42
800 15
150
P#0200WJ102##BH1 1000
14P#0200WJ122##BH1 1200
P#0200WJ162##BH1 1600
P#0200WJ202##BJ1
R85
2000
14
150
P#0200WJ252##BJ1 2500
P#0200WJ302##BJ1 3000
P#0200WH402##BJ1 4000 13
P#0200WH502##BJ1 5000
P#0200WF602##BJ1 6000 12
www.vishay.com For technical questions, contact: powcap@vishay.com Document Number: 22082
4Revision: 10-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
P. 70, P. 100, P. 140, P. 200
Vishay Draloric RF Power Plate Capacitors with Contoured Rim,
Class 1 Ceramic
Notes
(1) Dimension W2 will vary depending upon capacitance
(2) Type PE 70 is not available
DIMENSIONS in millimeters (inches)
TYPE
PA 70
PC 70
PD 70
(2)
PA 100
PC 100
PD 100
PE 100
PA 140
PC 140
PD 140
PE 140
PA 200
PC 200
PD 200
PE 200
Diameter Dmax. 70 (2.76) 100 (3.52) 140 (5.51) 200 (7.87)
Thread size M6 M8 M8 M10
Width W135 ± 1 (1.38 ± 0.04) 40 ± 1 (1.58 ± 0.04) 40 ± 1 (1.58 ± 0.04) 45 ± 1 (1.77 ± 0.04)
Width W2 (1) 30 (1.81) 30 (1.81) 30 (1.81) 32 (1.26)
Height H 116 (4.57) 146 (5.75) 186 (7.32) 246 (9.69)
Length L1100 (3.94) 140 (5.51) 140 (5.51) 200 (7.87)
Length L215 (0.59) 30 (1.18) 30 (1.18) 30 (1.18)
Thread size Thread size
PD
3 nger terminals
W1W1
PC PA
PE
H
D
W2
L1
L2
6 nger terminals
Band terminals
Band terminals and ceramic base
not available as PE 70
30 ± 1
(1.18 ± 0.04)
50 (1.97)
5.0
(0.2)
10 (0.39)
0.3
(0.012)
13 (0.51)
85
(3.35)
6.4 + 0.4
(0.25 + 0.02)
66 ± 2
(2.60 ± 0.08)
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.