HA4890E-10F - Crydom Corporation - Datasheet.Directory

MODEL NUMBERS AC CONTROL HA4812 HA4825 HA4850 HA4875 HA4890

DC C ONTROL HD4812 HD4825 HD4850 HD4875 HD4890

OUTPUT SPECIFICATIONS ➀

Operating Voltage (47-63 Hz) [Vrms] 48-530 48-530 48-530 48-530 48-530

Max. Load Current ➂[Arms] 12 25 50 75 90

Min. Load Current, [mArms] 40 40 40 40 40

Transient Overvoltage [Vpk] 1200 1200 1200 1200 1200

Max. Surge Current, (16.6ms) [Apk] 140 250 625 1000 1200

Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7 1.7

Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.48 1.02 0.63 0.31 0.28

Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 81 260 1620 4150 6000

Max. Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10 10

Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁500 500 500 500 500

Max. Turn-On Time➄1/2 Cycle (DC Input), 10.0 msec (AC Input)

Max. Turn-Off Time 1/2 Cycle (DC Input), 40.0 msec (AC Input)

Power Factor (Min.) with Max. Load 0.5 0.5 0.5 0.5 0.5

INPUT SPECIFICATIONS ➀DC CONTROL AC CONTROL AC CONTROL

(D PREFIX) (A PREFIX)➃(E SUFFIX)

Control Voltage Range 3-32 Vdc 90-280 Vrms (60Hz) 18-36 Vrms

Max. Reverse Voltage -32 Vdc --- ---

Max. Turn-On Voltage 3.0 Vdc 90 Vrms 18 Vrms

Min. Turn-Off Voltage 1.0 Vdc 10 Vrms 4.0 Vrms

Nominal Input Impedance See Note➅60K Ohms 9.0K Ohms

Typical Input Current 2.0 mA➅2mA @ 120 Vrms, 4mA @ 240 Vrms 3mA @ 24 Vrms

GENERAL NOTES

➀All parameters at 25ºC unless otherwise specified.

➁Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1

➂Heat sinking required, for derating curves see page 2.

➃24 Vac Input option, E suffix.

➄Turn-on time for random turn-on versions

is 0.02 msec (DC Control Models).

➅Input circuitry incorporates active current limiter.

• Zero Voltage and Random

Turn-On Switching

• Panel Mount

• 1200V Blocking Capability

FastFax Document No. 158

SERIES HA/HD.032698, PAGE 1 OF 3

Featuring state-of-the-art Surface

Mount Technology, these SPST-NO

relays deliver proven reliability in the

most demanding applications.

Output consists of an SCR AC switch

and is available in zero-cross, random

turn-on (phase controllable) and ver-

sions with either AC or DC input (coil)

control.

Manufactured in Crydom’s ISO 9002

Certified facility for optimum product

performance and reliability.

Series HA, Series HD

12-90Amp • 480 Vac• AC Output

For recommended applications and more information contact:

USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280

Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com

WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191

UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close,

Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU

GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH,

Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: vertrieb@crydom.com

AVAILABLE OPTIONS

E24 VAC Input (18-36 Vac)

Example: HA4825E

-10 Random Turn-On (AC & DC Control)

Phase Controllable (DC Control)

Example: HD4890-10

FFaston Terminals (Up to 50 Amp Models)

GENERAL SPECIFICATIONS

Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms

Insulation Resistance (Min.) @ 500 Vdc 109Ohm

Max. Capacitance Input/Output 8 pF

Ambient Operating Temperature Range -40 to 80ºC

Ambient Storage Temperature Range -40 to 125ºC

MECHANICAL SPECIFICATIONS

Weight: (typical) 3.0 oz. (86.5g)

Encapsulation: Thermally Conductive Epoxy

Terminals: Screws and Saddle Clamps Furnished, Unmounted

Crydom Heat Sinks offer excellent

thermal management and are per-

fectly matched to the load current

ratings of Crydom panel mount

relays. Request Crydom’s Heat Sink

specification sheet for all the details.

FastFax Document No. 158

SERIES HA/HD.032698, PAGE 2 OF 3

Series HA, Series HD

12-90Amp • 480 Vac• AC Output

APPROVALS

UL E116949

CSA LR81689

VDE 10143 UG

Screw Torque Requirements:

6-32 Screws - 10 in./lbs.,

8-32 and 10-32 Screws - 20in./lbs.

(Screws dry without grease.)

Fastons:

Single pair (up to 25A)

Double pair* (up to 50A).

*Caution: User must connect to both pairs

1.87

(47.5)

.78

(19.8)

2.30

(58.4)

1.70

(43.2)

.90

(22.9)

.45

(11.4)

1.10

(27.9) 8-32 TERMINAL

(2 PLACES )

1.00

(25.4) 6-32 TERMINAL

(2 PLACES)

1.80

(45.7)

SOLID-STATE RELAY

OUTPUT

34 +-- INPUT

MOUNTING

HOLE/SLOT

0.17 (4.3) DIA.

BASE PLATE

.125 (3.2)

.90

(22.9)

FASTON

TERMINAL

.187 X .032

(2 PLCS.)

BASE PLATE

.125 (3.2)

FASTON TERMINAL

.250 X .032 (2 PLCS.)

1.87

(47.5)

.78

(19.8)

2.30

(58.4)

1.70

(43.2)

.87 REF.

(22.2)

OUTPUT

INPUT

1.00

(25.4)

1.80

(45.7)

.45

(11.4)

1.10

(27.9)

MOUNTING

HOLE/SLOT

0.17 (4.3) DIA.

All dimensions are in inches (millimeters)

For recommended applications and more information contact:

USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280

Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com

WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191

UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close,

Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU

GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH,

Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: vertrieb@crydom.com

02 4 8 126 20 40 60 80

Load Current [Arms] Max Ambient Temp. [ºC]

Power Dissipation

110

115

120

Base Plate Temp [ºC]

12A

9ºC/W 5ºC/W

3ºC/W

7ºC/W

NO HEATSINK

05 10 20 2515 20 40 60 80

Load Current [Arms] Max Ambient Temp. [ºC]

Power Dissipation

120

Base Plate Temp [ºC]

25A

1ºC/W 100

110

3ºC/W

NO HEATSINK

010 20 40 5030 20 40 60 80

Load Current [Arms] Max Ambient Temp. [ºC]

Power Dissipation

Base Plate Temp [ºC]

50A

2ºC/W

1ºC/W .5ºC/W

100

110

120

1.5ºC/W

NO HEATSINK

120

015 30 60 7545 20 40 60 80

Load Current [Arms] Max Ambient Temp. [ºC]

Power Dissipation

100

110

120

Base Plate Temp [ºC]

75A

.5ºC/W 95

1ºC/W

120

020 40 80 060 20 40 60 80

Load Current [Arms] Max Ambient Temp. [ºC]

Power Dissipation

100

110

120

Base Plate Temp [ºC]

90A

1ºC/W

.4ºC/W

.2ºC/W

.5ºC/W

2ºC/W

.3ºC/W

010

CURRENT DERATING CURVES

FastFax Document No. 158

SERIES HA/HD.032698, PAGE 3 OF 3

Series HA, Series HD

12-90Amp • 480 Vac• AC Output

For recommended applications and more information contact:

USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280

Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: sales@crydom.com

WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191

UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close,

Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU

GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH,

Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: vertrieb@crydom.com