CUSTOMER DRAWING 1 Product Name Ident. Code S200-1-W1-22-9 S2001R S200-2-W1-22-9 S2002R S200-3-W1-22-9 S2003R S200-4-W1-22-9 S2004R S200-5-W1-22-9 S2005R 3 2 3 4 Product Dimensions oB oC L1.75 min min (L0.075) 16.50 1.90 2.67 (0.650) (0.075) (0.105) 16.50 2.67 3.68 (0.650) (0.105) (0.145) 16.50 4.32 5.08 (0.650) (0.170) (0.200) 19.10 5.97 6.48 (0.750) (0.235) (0.255) 19.10 6.98 7.62 (0.750) (0.275) (0.300) oD max 1.90 (0.075) 2.67 (0.105) 4.32 (0.170) 5.97 (0.235) 6.98 (0.275) Cable Dimensions oE oF max min 2.67 0.90 (0.105) (0.035) 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) 6.48 3.30 (0.255) (0.130) 7.62 4.30 (0.300) (0.170) oG min 0.50 (0.020) 0.75 (0.030) 1.25 (0.050) 1.80 (0.070) 2.50 (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue. 4. PRE-INSTALLED LEAD: Stranded silver-plated copper in accordance with SAE-AS22759/91-22-9. Color: white. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material. 2. Install using TE Connectivity approved convection or infrared heating tools in accordance with TE Connectivity process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65C to +200C. For best results, prepare the cable as shown: "G" is the minimum diameter on which the sleeve will seal. TITLE: SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS, IMMERSION RESISTANT, 200 DEG C ROHS COMPLIANT Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A REVISED BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Devices TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ECO NUMBER: DOCUMENT NO.: S200- X-W1-22-9 REV: DATE: D SCALE: May 25, 2016 SIZE: HMR 06090 ECO-16-007432 NTS (c) 2005-2016 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. A SHEET: 1 of 1