VWO 40 Three Phase AC Controller Modules IRMS = 40 A VRRM = 1200-1600 V Preliminary data 7 1 VRSM VDSM VRRM VDRM V V 1200 1400 1600 1200 1400 1600 14 1 Type 16 2 8 2 17 3 3 9 14 16 17 10 11 VWO 40-12io7 VWO 40-14io7 VWO 40-16io7 7 10 8 11 9 13 t 13 Symbol Conditions IRMS ITRMS ITAVM TC = 85C, 50 - 400 Hz (per phase) TVJ = TVJM TC = 85C; (180 sine) ITSM TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 45C VR = 0 TVJ = TVJM VR = 0 400 450 A A 360 390 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 800 850 A2s A2s t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 650 640 A2s A2s TVJ = TVJM repetitive, IT = 150 A f =50 Hz, tP =200 s VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG/dt = 0.3 A/s 100 A/s e -o u A A A a (di/dt)cr 40 29 18 s I2t Maximum Ratings h TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM tp = 30 s tp = 300 s 500 A/s 1000 V/s PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 3000 V~ V~ VISOL 50/60 Hz, RMS IISOL < 1 mA Md Mounting torque (M5) Terminal connection torque (M3; M5) Weight typ. * Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency * Package with metal base plate * Isolation voltage 3000 V~ * Planar passivated chips * UL applied Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages p (dv/dt)cr Features t = 1 min t=1s * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling * High power density 5/4415% Nm/lb.in. 1.5/1315% Nm/lb.in. 180 g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 1-2 G VWO 40 Symbol Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM < 5 VT IT < 1.65 V VT0 rT For power-loss calculations only 0.85 15 V m VGT VD = 6 V IGT VD = 6 V VGD IGD TVJ = TVJM IL = 80 A; TVJ = 25C mA < < < < 1.0 1.6 100 150 V V mA mA VD = 2/3 VDRM < < 0.2 5 V mA TVJ = 25C; tP = 10 s IG = 0.3 A; diG/dt = 0.3 A/s < 200 mA IH TVJ = 25C; VD = 6 V; RGK = < 150 mA tgd TVJ = 25C; VD = 1/2VDRM IG = 0.3 A; diG/dt = 0.3 A/s < 2 s tq TVJ = TVJM; IT = 20 A, tP = 200 s; di/dt = -10 A/s VR = 100 V; dv/dt = 15 V/s; VD = 2/3 VDRM typ. 150 s RthJC per per per per u 1.43 0.238 1.53 0.255 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 8.0 4.5 50 mm mm m/s2 e dS dA a thyristor; sine 180el module thyristor; sine 180el module -o RthJK t TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C h a s Dimensions in mm (1 mm = 0.0394") p G IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 2-2