NTP8G202N
www.onsemi.com
6
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.415 9.66 10.53
C0.160 0.190 4.07 4.83
D0.025 0.038 0.64 0.96
F0.142 0.161 3.61 4.09
G0.095 0.105 2.42 2.66
H0.110 0.161 2.80 4.10
J0.014 0.024 0.36 0.61
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
−T−
C
S
T
U
R
J
STYLE 10:
PIN 1. GATE
2. SOURCE
3. DRAIN
4. SOURCE
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent− Marking.pdf. S CILLC r eserves the right t o make changes without further n otice to any product s herein. S CILLC makes no warrant y, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all l iabilit y, including without limitation special, consequential or i ncident al d amages. “Typical” parameters which may b e p rovided i n SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application b y c ust omer’s technical e xperts. SCILLC does not c onvey a ny license under its p atent rights nor the rights o f o t hers. S CI LLC p roduct s a re n ot designed, int ended,
or authorized for use as c omponent s i n s yst ems i nt ended f or s urgic al i m plant i nt o the body, or other applications intended t o support or sustain life, or f or a ny o ther a pplicat ion in w hich
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC an d it s officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and r easonable a ttorney f ees a rising o ut of, directly or i ndirectly, a ny c laim o f personal injury or d eath a ssociated w ith s uch u nint ended o r u nauthorized u se, e ven if such claim
alleges that SCILLC was negligent regarding the d esign or manufacture of the p art. SCILLC i s a n E qual O pportunity/Af firmative Act ion Employer. T his literature is s ubject t o all applicable
copyright laws and is not for resale in any manner.
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
NTP8G202N/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
Sales Representative