PRODUCT: RUEF600 PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com DOCUMENT: SCD 25178 PCN: F24402 REV LETTER: D REV DATE: SEPTEMBER 24, 2007 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Rating at 20C 30 VDC /100 A DC 30 VAC /70 ARMS Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper Marking: TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -16.5 -24.1 -(0.65) -(0.95) *Rounded off approximation C MIN 9.4 (0.37) D MAX 10.9 (0.43) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP AMPS 20C HOLD 6.00 AMPS AT 20C HOLD TRIP 6.00 12.00 SECONDS AT 20C, 30.0A MAX 16.0 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: RESISTANCE OHMS AT 20.0 C MIN MAX 0.005 0.02 ONE-HOUR POST-TRIP RESISTANCE STANDARD TRIP OHMS AT 20C MAX 0.04 WATTS AT 20C 3.5 UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant NOMINAL TRIPPED POWER DISSIPATION ELV Compliant (c) 2005, 2007 Tyco Electronics Corporation. All rights reserved. Pb-Free