DATASHEET ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER Description Features The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating at speeds from 0 to 140 MHz. * * * * * * * The ICS2304NZ-1 is characterized for operation from -40C to +85C for automotive and industrial applications. Packaged in 8-pin TSSOP (4.4 mm body) Available in Pb (lead) free package Frequency range of 0 to 140 MHz Less than 100 ps skew between outputs Distribute one clock input to one bank of four outputs Operating voltage of 3.3 V 10% Available in commercial and industrial temperature ranges NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram OE Logic Control CLK0 CLK1 CLK_IN CLK2 CLK3 IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 1 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Pin Assignment Functionality Table Inputs CLK_I N 1 8 CLK3 OE 2 7 CLK2 CLK0 3 6 VDD GND 4 5 CLK1 Outputs CLK_IN OE CLK(3:0) 0 0 Tristate 0 1 0 1 0 Tristate 1 1 1 Pin Descriptions Pin Number Pin Name Pin Type 1 CLK_IN Input Input reference frequency. 2 OE Input Output Enable. When OE is low, it tri-states clock outputs. 3 CLK0 Output Buffered clock output. 4 GND Power Connect to ground. 5 CLK1 Output Buffered clock output. 6 VDD Power Power supply for 3.3 V. 7 CLK2 Output Buffered clock output. 8 CLK3 Output Buffered clock output. IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER Pin Description 2 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the ICS2304NZ-1. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Rating Supply Voltage Range, VDD -0.5 V to 4.3 V Input Voltage Range, VI (see notes 1 and 2) -0.5 V to VDD + 0.5 V Output Voltage Range, VO (see notes 1 and 2) -0.5 V to VDD + 0.5 V Input Clamp Current, IIK (VI<0 or VI>VDD) 50 mA Output Clamp Current, IIK (VO<0 or VO) 50 mA Continuous Total Output Current, IO (VO = 0 to VDD) 50 mA Package Thermal Impedance, JA (see note 3): PW Package 230.5 C/W Storage Temperature Range, Tstg -65 C to 150 C Notes: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51. Recommended Operation Conditions Parameter Supply Voltage, VDD High-level Input Voltage, VIH Min. Typ. Max. Units 3 3.3 3.6 V 0.7 x VDD V 0.3 x VDD V VDD V High-level Output Current, IOH -24 mA Low-level Output Current, IOL 24 mA +85 C Low-level Input Voltage, VIL Input Voltage, VI 0 Operating Free-air Temperature, TA -40 - Timing Requirements Over Recommended Ranges of Supply Voltage and Operating Free-air Temperature Min. Clock Frequency, fCLK IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 0 3 Typ. Max. Units 140 MHz ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Electrical Characteristics at 3.3 V over Recommended Free-air Temperature Range VDD = 3.3 V 10%, TA = -40C to +85C (unless stated otherwise) Parameter Input Voltage High-level Output Voltage Low-level Output Voltage Symbol Conditions VIK VDD at 3.3 V, II = -18 mA VOH VOL High-level Input Current IOH Low-level Input Current IOL Input Current II VDD = min to max, IOH = -1 mA Min. Typ. VDD-0.2 3.3 VDD = 3 V, IOH = -24 mA 2 2.3 VDD = 3 V, IOH = -12 mA 2.4 2.7 Max. Units -1.2 V V VDD = min to max, IOH = 1 mA 0.222 0.2 VDD = 3 V, IOL = 24 mA 0.61 0.8 VDD = 3 V, IOL = 12 mA 0.31 0.55 VDD = 3 V, VO = 1 V -53 -40 VDD = 3.3 V, VO = 1.65 V -54 VDD = 3 V, VO = 2 V 40 VDD = 3.3 V, VO = 1.65 V V = VDD or VO 53 mA mA 57 0.1 V 50 A Dynamic Supply Current IDD Unloaded outputs at 66.67 MHz 13 37 mA Input Capacitance (Note 1) CI VDD = 3.3 V, VI = 0V or 3.3 V 3 5 pF Output Capacitance (Note 1) CO VDD = 3.3 V, VI = 0V or 3.3 V 3.2 pF Note 1: Guaranteed by design, not 100% tested in production. IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 4 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Switching Characteristics at 3.3 V over Recommended Ranges of Supply Voltage and Operating Free-air Temperature VDD = 3.3 V 10%, TA = -40C to 85C (unless stated otherwise) Parameter Symbol Conditions Min. Typ. Max. Units High-to-Low Propagation Delay (Note 1) tPLH VO = VDD/2 1.8 3.1 3.8 ns Low-to-High Propagation Delay (Note 1) tPHL VO = VDD/2 1.8 2.9 3.8 ns Output Skew Window (Note 1) TSK(o) VO = VDD/2 50 100 ps Pulse Skew = | tPLH - tPHL | (Note 1) TSK(p) VO = VDD/2 300 ps Process Skew (Note 1) TSK(pr) VO = VDD/2 500 ps CLKIN High Time (Note1) Thigh CLKIN Low Time (Note1) Tlow 66 MHz 6 ns 140 MHz 3 ns 66 MHz 6 ns 140 MHz 3 ns Rise Time (Note 1) Tr VOL=0.8 V, VOH=2.0 V 1.2 2.0 ns Fall Time (Note 1) Tf VOH=2.0 V, VOL=0.8 V 1.2 2.0 ns 200 ps 40 ps Cycle-to-Cycle Jitter Jitter, 1-Sigma Tcyc-cyc Loaded outputs Tj1s 10,000 cycles 14 Note 1: Guaranteed by design, not 100% tested in production. IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 5 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Parameter Measurement Information VDD 50% VDD CLKIN 0V tPLH CLK0-CLK3 tPHL 2.0 V 50% VDD 0.8 V 2.0 V 50% VDD 0.8 V tr VOH VOL tf Figure 2. Voltage Thresholds for Propagation Delay (tpd) Measurements 50% VDD Any CLK 50% VDD Any CLK tSK(p) Figure 3. Output Skew Parameter Value Unit VIH (MIN) 0.5 VDD V VIL (MAX) 0.35 VDD V 0.4 VDD V VTEST tCYC tHIGH VIH (MIN) 0.5 VDD tLOW VTEST VIL (MAX) 0.2 VDD 0.4 VDD Peak-to-Peak (minimum) Figure 4. Clock Waveform IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 6 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER VOH - High-level Output Voltage (V) Figure 5. Supply Current vs. Frequency Figure 6. High-level Output Voltage vs. High-level Output Current IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 7 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER VOL - Low-level Output Voltage (V) FAN OUT BUFFER Figure 7. Low-level Output Voltage vs. Low-level Output Current IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 8 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Marking Diagram 5 1 BOTTOM TOP 5 YYWW 04NIL $$## #### YYWW 04NI1 8 4 TOP BOTTOM Marking Diagram (Pb free/industrial) 5 1 4 TOP Marking Diagram (industrial) 8 ## #### $$## #### 4 1 BOTTOM ## #### 1 5 YYWW 304NL 8 YYWW 304N1 8 Marking Diagram (Pb free) 4 TOP BOTTOM Notes: 1. ###### is the lot number. 2. YYWW is the last two digits of the year and week that the part was assembled. 3. "L" denotes Pb (lead) free package. IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 9 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Package Outline and Package Dimensions (8-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch) Package dimensions are kept current with JEDEC Publication No. 95, MO-153 8 Millimeters Symbol E1 INDEX AREA A A1 A2 b C D E E1 e L aaa E 1 2 D A A2 Min Inches Max Min -1.20 0.05 0.15 0.80 1.05 0.19 0.30 0.09 0.20 2.90 3.10 6.40 BASIC 4.30 4.50 0.65 Basic 0.45 0.75 0 8 -0.10 Max -0.047 0.002 0.006 0.032 0.041 0.007 0.012 0.0035 0.008 0.114 0.122 0.252 BASIC 0.169 0.177 0.0256 Basic 0.018 0.030 0 8 -0.004 A1 c - Ce b SEATING PLANE L aaa C Ordering Information Part / Order Number 2304NZG-1* 2304NZG-1T* 2304NZG-1LF 2304NZG-1LFT 2304NZGI-1* 2304NZGI-1T* 2304NZGI-1LF 2304NZGI-1LFT Marking Shipping Packaging Package Temperature see page 8 Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 0 to +70 C 0 to +70 C 0 to +70 C 0 to +70 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C *NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01. Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDTTM / ICSTM LOW SKEW PCI/PCI-X BUFFER 10 ICS2304NZ-1 REV E 081109 ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER FAN OUT BUFFER Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 www.idt.com/go/clockhelp Corporate Headquarters Integrated Device Technology, Inc. www.idt.com (c) 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA