POWER NPT40-M Series 55 Watts Data Sheet Total Power: 45 - 55 Watts Input Voltage: 90 - 264 Vac 120 - 300 Vdc # of Outputs: Triple Special Features Medical and ITE safety approvals Universal input Less than 1U high 2" x 4" footprint Overload and short circuit protection High MTBF Built in EMI filter (CISPR 22 Class B) 0 C to +80 C operation Input power < 74 watts Complies with EN61000-3-2 Class I approved Class II approved (with Class A EMI) LPX100 enclosure kit available Dual AC fuses RoHS compliant Electrical Specifications Input Input range 90 - 264 Vac (wide range) 127 - 300 Vdc Frequency 47 - 440 Hz Inrush current < 50 A peak @ 230 Vac, cold start @ 25 C Input power < 74 Watts Efficiency 75% average EMI/RFI FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Safety ground leakage current 275 A @ 50/60 Hz; 264 Vac input Safety TUV: UL: CSA: CB: CE: CQC: 60950, 60601-1, 3rd edition 60950, 60601-1 60950, 60601-1 Certificate and report 3rd edition Mark (LVD) Mark Output Maximum power 45 W for convection 55 W with 30CFM forced air Hold-up time 10/20 ms 115/230 Vac input line Overload protection Short circuit protection on all outputs. Case overload protected @ 110% to 160% above peak rating Overvoltage protection 6.5 to 7.5 Vdc on the main output NPT40-M Series Data Sheet Environmental Specifications 0 to 50 C ambient derate each output at 2.5% per degree from 50 C to 80 C. -20 C start up Operating temperature Storage temperature -45 C to +85 C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 C ambient conditions Mechanical Drawing BARCODE SERIAL LABEL 4.00" (101.6) 1.10" (28) 0.96" (24.4) 3.73" (94.6) .063" (1.6) M1 MODEL: NPT42-M MADE IN PHILIPPINES SK1 PIN 3 1.72" (43.8) 6 PIN 1 2.00" (50.8) GND TAB (CN1) SK2 M2 MODEL LABEL 4.0 MOUNTING HOLE 4 PLACES 1.10" (28) RoHS LABEL RoHS 1 0.197" (5.0) MINIMUM STANDOFF HEIGHT NPT40-M Series Data Sheet Ordering Information Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30CFM Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 +5 V 0.5 A 5A 8A 9A 2% 50 mV +12 V 0.1 A 2.5 A 3A 4A 5% 120 mV -12 V 0A 0.5 A 0.7 A 0.7 A 5% 120 mV +5 V 0.5 A 5A 8A 9A 2% 50 mV +15 V 0.1 A 2A 2.4 A 4A 5% 150 mV -15 V 0A 0.5 A 0.7 A 0.7 A 5% 150 mV NPT42-M NPT43-M +5 V 0.5 A 5A 8A 9A 2% 50 mV +24 V 0.1 A 1.0 A 1.5 A 2A 5% 240 mV +12 V 0A 0.5 A 0.7 A 0.7 A 5% 120 mV NPT44-M 1. 2. 3. 4. Peak current lasting < 30 seconds with a maximum 10% duty cycle. At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and load ranges. Minimum loads are required. 5. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. Pin Assignments Mating Connectors Connector NPT42-M NPT43-M NPT44-M SK1-1 Line Line Line SK1-3 Neutral Neutral Neutral CN1 Ground Ground Ground SK2-1 +5 V +5 V +5 V SK2-2 +5 V +5 V +5 V SK2-3 Common Common Common SK2-4 Common Common Common SK2-5 -12 V -15 V +12 V SK2-6 +12 V +15 V +24 V AC Input Molex 09-50-8031 PINS: 08-52-0113 DC Outputs Molex 09-50-8061 PINS: 08-52-0113 Artesyn Embedded Technologies Connector Kit #70-841-006, includes all of the above. 1. 2. 3. 4. 5. 6. Specifications subject to change without notice. All dimensions in inches (mm), tolerance is 0.02"( 0.5 mm) Mounting holes M1 and M2 should be grounded for EMI purposes. Mounting hole M1 is safety ground connection. Ground faston tab size is 6.35 mm x 0.80 mm Specifications are for convection rating at factory settings at 115 Vac input, 25 C unless otherwise stated. 7. Warranty: 2 years 8. Weight: 0.3 lbs/.14 kg WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. (c) 2018 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com NPT40-M DS 15Oct2018 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Artesyn Embedded Technologies: NPT42-M NPT44-M