BAP70-04W Silicon PIN diode Rev. 01 -- 5 March 2004 Product data 1. Product profile 1.1 General description Two planar PIN diodes in series configuration in a SOT323 small SMD plastic package. 1.2 Features High voltage current control RF resistor for RF attenuators Low diode capacitance Low series inductance. 1.3 Applications RF attenuators and switches. 2. Pinning information Table 1: Discrete pinning Pin Description 1 anode 2 cathode 3 common connection Simplified outline Symbol 3 3 1 2 sym015 1 2 sot323_so 3. Ordering information Table 2: Ordering information Type number Package BAP70-04W Name Description Version - plastic surface mounted package; 3 leads SOT323 BAP70-04W Philips Semiconductors Silicon PIN diode 4. Marking Table 3: Marking Type number Marking code BAP70-04W 1Np 5. Limiting values Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Per diode VR continuous reverse voltage - 50 V IF continuous forward current - 100 mA Ts = 90 C Ptot total power dissipation - 260 mW Tstg storage temperature -65 +150 C Tj junction temperature -65 +150 C Typ Unit 230 K/W 6. Thermal characteristics Table 5: Thermal characteristics Symbol Parameter Conditions Rth(j-s) thermal resistance from junction to soldering point 7. Characteristics Table 6: Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions VF forward voltage IR Cd Min Typ Max Unit IF = 50 mA 0.95 1.1 V reverse current VR = 50 V - 20 nA diode capacitance see Figure 1; f = 1 MHz; Per diode VR = 0 V 600 - fF VR = 1 V 430 - fF VR = 20 V 250 300 fF 9397 750 12557 Product data (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 -- 5 March 2004 2 of 7 BAP70-04W Philips Semiconductors Silicon PIN diode Table 6: Characteristics ...continued Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit rD diode forward resistance see Figure 2; f = 100 MHz; IF = 0.5 mA 77 100 IF = 1 mA 40 50 IF = 10 mA 5.4 7 IF = 100 mA 1.4 1.9 L charge carrier life time when switched from IF = 10 mA to IR = 6 mA; RL = 100 ; measured at IR = 3 mA 1.25 - s LS series inductance IF = 100 mA; f = 100 MHz 1.4 - nH 001aaa461 600 mce007 103 rD () Cd (fF) 500 102 400 10 300 200 0 5 10 15 20 1 10-1 1 f = 1 MHz; Tj = 25 C. IF (mA) f = 100 MHz; Tj = 25 C. Fig 1. Diode capacitance as a function of reverse voltage; typical values. Fig 2. Forward resistance as a function of forward current; typical values. 9397 750 12557 Product data 102 10 VR (V) (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 -- 5 March 2004 3 of 7 BAP70-04W Philips Semiconductors Silicon PIN diode 8. Package outline Plastic surface mounted package; 3 leads SOT323 D E B A X HE y v M A 3 Q A A1 c 1 2 e1 bp Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w mm 1.1 0.8 0.1 0.4 0.3 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.23 0.13 0.2 0.2 OUTLINE VERSION SOT323 REFERENCES IEC JEDEC EIAJ SC-70 EUROPEAN PROJECTION ISSUE DATE 97-02-28 Fig 3. Package outline. 9397 750 12557 Product data (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 -- 5 March 2004 4 of 7 BAP70-04W Philips Semiconductors Silicon PIN diode 9. Revision history Table 7: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes BAP70-04W_1 20040305 Product data - 9397 750 12557 - 9397 750 12557 Product data (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 -- 5 March 2004 5 of 7 BAP70-04W Philips Semiconductors Silicon PIN diode 10. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions 12. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 12557 Product data (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 -- 5 March 2004 6 of 7 BAP70-04W Philips Semiconductors Silicon PIN diode 14. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 2 2 4 5 6 6 6 6 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 5 March 2004 Document order number: 9397 750 12557 Published in The Netherlands