MBR3035CT - International Rectifier

SCHOTTKY RECTIFIER 30 Amp

MBR30...CT

MBRB30...CT

MBR30...CT-1

PD-20716 rev. A 12/99

1www.irf.com

Major Ratings and Characteristics

IF(AV) Rectangular waveform 30 A

(Per Device)

IFRM @ TC

= 123°C 30 A

(Per Leg)

VRRM 35/45 V

IFSM @ tp = 5 µs sine 1020 A

VF@ 20 Apk, TJ

= 125°C 0.6 V

TJrange - 65 to 150 °C

Characteristics Values Units

Description/Features

This center tap Schottky rectifier has been optimized for low

reverse leakage at high temperature. The proprietary barrier

technology allows for reliable operation up to 150° C junction

temperature. Typical applications are in switching power

supplies, converters, free-wheeling diodes, and reverse

battery protection.

150° C TJ operation

Center tap TO-220, D2Pak and TO-262 packages

Low forward voltage drop

High purity, high temperature epoxy encapsulation for

enhanced mechanical strength and moisture resistance

High frequency operation

Guard ring for enhanced ruggedness and long term

reliability

Case Styles

MBR30...CT MBRB30...CT MBR30...CT-1

TO-220 D2PAK TO-262

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev.A 12/99

2www.irf.com

MBR3035CT MBR3045CT

MBRB3035CT MBRB3045CT

MBR3035CT-1 MBR3045CT-1

TJMax. Junction Temperature Range -65 to 150 °C

Tstg Max. Storage Temperature Range -65 to 175 °C

RthJC Max. Thermal Resistance 1.5 °C/W DC operation

Junction to Case (Per Leg)

RthCS Typical Thermal Resistance 0.50 °C/W Mounting surface, smooth and greased

Case to Heatsink Only for TO-220

RthJA Max. Thermal Resistance 50 °C/W DC operation

Junction to Ambient For D2Pak and TO-262

wt Approximate Weight 2 (0.07) g (oz.)

T Mounting Torque Min. 6 (5) Non-lubricated threads

Max. 12 (10)

Thermal-Mechanical Specifications

Parameters Values Units Conditions

Kg-cm

(Ibf-in)

VFM Max. Forward Voltage Drop 0.76 V @ 30A TJ = 25 °C

(1) 0.6 V @ 20A

0.72 V @ 30A

IRM Max. Instantaneus Reverse Current 1 mA TJ = 25 °C

(1) 100 mA TJ = 125 °C

VF(TO) Threshold Voltage 0.29 V TJ = TJ max.

rtForward Slope Resistance 13.6 mΩ

CTMax. Junction Capacitance 800 p F VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C

LSTypical Series Inductance 8.0 nH Measured from top of terminal to mounting plane

dv/dt Max. Voltage Rate of Change 10,000 V/ µs

(Rated VR)

Electrical Specifications

Parameters Values Units Conditions

Rated DC voltage

TJ = 125 °C

(1) Pulse Width < 300µs, Duty Cycle <2%

IF(AV) Max. Average Forward (Per Leg) 15 A @ TC = 123° C, (Rated VR)

Current (Per Device) 30

IFRM Peak Repetitive Forward 30 A Rated VR, square wave, 20kHz

Current (Per Leg) TC = 123° C

IFSM Non Repetitive Peak 1020 5µs Sine or 3µs

Surge Current Rect. pulse

Surge applied at rated load conditions halfwave,

single phase, 60Hz

IRRM Peak Repetitive Reverse 2.0 A 2.0 µsec 1.0 KHz

Surge Current

Absolute Maximum Ratings

Parameters Values Units Conditions

Following any rated load condition

and with rated VRRM applied

200

VRMax. DC Reverse Voltage (V)

VRWM Max. Working Peak Reverse Voltage (V) 35 45

Voltage Ratings

Parameters

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev. A 12/99

www.irf.com

Fig. 2 - Typical Values Of Reverse Current

Vs. Reverse Voltage (Per Leg)

Fig. 3 - Typical Junction Capacitance

Vs. Reverse Voltage (Per Leg)

Fig. 4 - Max. Thermal Impedance ZthJC

Characteristics (Per Leg)

Fig. 1 - Max. Forward Voltage Drop Characteristics

(Per Leg)

100

0 0.3 0.6 0.9 1.2 1.5

T = 150°C

T = 125°C

T = 25°C

Forward Voltage Drop - V (V)

Instantaneous Forward C urrent - I (A)

100

1000

0 1020304050

Junction Capacitance - C (pF)

Rev erse V olt a g e - V (V)

T = 25°C

0.001

0.01

0.1

100

1000

0 1020304050

125°C

100°C

75°C

50°C

25°C

Reverse Current - I (mA)

Re ve rse Vo ltag e - V (V)

T = 150°C

0.01

0.1

0.00001 0.0001 0.001 0.01 0.1 1 10 100

thJC

t , Rectangular Pulse Duration (Seconds)

Single Pulse

(Thermal Resistance)

Thermal Impedance Z (°C/W)

Notes:

1. Duty factor D = t / t

2. Peak T = P x Z + T

JthJC C

D = 0.75

D = 0.50

D = 0.33

D = 0.25

D = 0.20

PDM

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev.A 12/99

4www.irf.com

Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

Fig. 5 - Max. Allowable Case Temperature

Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics

(Per Leg)

(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;

Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);

PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1

= rated VR

100

110

120

130

140

150

0 5 10 15 20 25

Allowable Case Temperature - (°C)

F(AV)

see note (2)

Average Forward Current - I (A)

Square w ave (D = 0.50)

Rated V applied

100

1000

10 100 1000 10000

FSM

Non-Repetitive Surge Current - I (A)

At Any Rated Load Condition

And With Rated V Applied

Following Surge RRM

Square Wave Pulse Duration - t (microsec)

0 5 10 15 20 25

Average Power Loss - (Watts)

F(AV)

RMS Lim it

D = 0.20

D = 0.25

D = 0.33

D = 0.50

D = 0.75

Average Forward Current - I (A)

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev. A 12/99

www.irf.com

3.78 (0.15)

3.54 (0.14)

10.54 (0.41)

MAX. DIA.

15.24 (0.60)

14.84 (0.58)

2.92 (0.11)

2.54 (0.10)

1TERM 2

14.09 (0.55)

13.47 (0.53) 3.96 (0.16)

3.55 (0.14)

0.94 (0.04)

0.69 (0.03)

4.57 (0.18)

4.32 (0.17)

30.61 (0.02) MAX.

5.08 (0.20) REF.

1.32 (0.05)

1.22 (0.05)

6.48 (0.25)

6.23 (0.24)

2°

0.10 (0.004)

1.40 (0.05)

1.15 (0.04)

2.89 (0.11)

2.64 (0.10)

2.04 (0.080) MAX.

Dimensions in millimeters and (inches)

Conform to JEDEC outline TO-220AB

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

ANODE

Ordering Information Table

Device Code

1524

1- Essential Part Number

2- B = Surface Mount

None = TO-220

3- Current Rating

4- Voltage code: Code = VRRM

5- CT= Essential Part Number

6- -1 = TO-262

None = TO-220

35 = 35V

45 = 45V

MBRB3045CT-1

Outline Table

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev.A 12/99

6www.irf.com

TRR

FE ED DIRE CTION

TRL

FE ED DIRE CTION

10.90 (0.429)

10.70 (0.421) 16.10 (0.634)

15.90 (0.626)

1. 75 (0. 069)

1. 25 (0. 049)

1.85 (0.073)

1.65 (0.065)

4.10 (0.161)

3.90 (0.153)

1.60 (0.063)

1.50 (0.059)

DIA.

1.60 (0.063)

1.50 (0.059)

DIA.

11.60 (0.457)

11.40 (0.449)

15. 42 (0. 609)

15. 22 (0. 601)

4. 72 (0. 186)

4. 52 (0. 178)

24.30 (0.957)

23.90 (0.941)

0.368 (0.0145)

0.342 (0.0135)

360 (14.173)

DIA . MAX.

26. 40 (1. 039)

24. 40 (0. 961)

13.50 (0.532)

12.80 (0.504)DIA.

60 (2. 362)

DIA . MIN.

SMD-220 Tape & Reel

W hen ordering, indic ate th e part

number, part orient at ion, and the

quantity. Quantitie s are in multiples

of 800 pieces per reel fo r both

TRL and TRR.

10.16 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) M AX.

5.08 (0.20) R EF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6.18 (0.24)

93°

REF.

2.61 (0.10)

2.32 (0.09)

5.2 8 (0 .2 1)

4.7 8 (0 .1 9)

4.6 9 (0 .1 8)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14.73 (0.58)

15.49 (0.61)

1.4 0 (0 .0 55 )

1.1 4 (0 .0 45 )

0.93 (0.37)

0.69 (0.27)

2X 11.43 (0.45)

17.78 (0.70)

8.89 (0.35)

3.81 (0.15)

2.08 (0.08)

2.54 (0.10)

MINIMUM RECOMMENDED FOO TPRINT

Dimensions in millimeters and (inches)

Tape & Reel Information

Outline Table

Dimensions in millimeters and (inches)

Conform to JEDEC outline D2Pak (SMD-220)

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

ANODE

MBR30...CT, MBRB30...CT, MBR30...CT-1

PD-20716 rev. A 12/99

www.irf.com

Outline Table

Dimensions in millimeters and (inches)

Modified JEDEC outline TO-262

BASE

COMMON

CATHODE

123

ANODE

COMMON

CATHODE

ANODE

WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332.

EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408.

IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801.

IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933.

IR ITALY: Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220.

IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086.

IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630.

IR TAIWAN: 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936.

http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice.