Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics Vishay Techno QPL MIL-PRF-83401 Qualified, Single-In-Line Resistor Networks FEATURES * 0.36 watt to 1.8 watt at + 70C. * Qualified to MIL-PRF-83401. * Designed for automatic insertion. * Withstands thermal stress from - 65C to + 125C. * Conforms to IC package configurations. * High temperature solder joints. * Custom schematic MIL-equivalent available. CIRCUIT APPLICATIONS C Schematic Standard Profile Low Profile 6 pin (M8340104xxxxxxC) 6 pin (M8340107xxxxxxC) 8 pin (M8340105xxxxxxC) 8 pin (M8340108xxxxxxC) 10 pin (M8340106xxxxxxC) 10 pin (M8340109xxxxxxC) 5, 7 or 9 resistors with one pin common Pin #1 6 Pin 8 Pin 10 Pin This model provides the user with a choice of 5, 7 or 9 nominally equal resistors, each connected to a common pin (Pin No.1). Commonly used in the following applications: * "Wired OR" Pull-up * Power Gate Pull-up * MOS/ROM Pull-up/Pull-down * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up G Schematic Standard Profile Low Profile 6 pin (M8340104xxxxxxG) 6 pin (M8340107xxxxxxG) 8 pin (M8340105xxxxxxG) 8 pin (M8340108xxxxxxG) 10 pin (M8340106xxxxxxG) 10 pin (M8340109xxxxxxG) 3, 4 or 5 isolated resistors 6 Pin Pin #1 8 Pin 10 Pin This model provides the user with a choice of 3, 4 or 5 nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: * "Wired OR" Pull-up * Power Driven Pull-up * Power Gate Pull-up * Line Termination ELECTRICAL SPECIFICATIONS Resistance Range: 100 ohms to 1 Megohm standard profile, 27 ohms to 1 Megohm low profile. Resistance Tolerance: 1%, 2%, 5% standard. Tighter tolerances available. Temperature Coefficient: (- 55C to + 125C) "K" = 100PPM/C, "M" = 300PPM/C. Package Power Rating: Schematic Standard Profile Low Profile C 1.0 watt to 1.8 watt 0.6 watt to 1.08 watt G 0.6 watt to 1.0 watt 0.36 watt to 0.60 watt Maximum Operating Voltage: 50 volts per resistor. Document Number 68014 Revision 23-Sep-99 * Long-line Impedance Balancing * LED Current Limiting * ECL Output Pull-down * TTL Input Pull-down Dielectric Strength: 200 V RMS, 1 minute. Insulation Resistance: 10,000 Megohm minimum. MECHANICAL SPECIFICATIONS Resistive Element: Thick film. Encapsulation: Thermoset epoxy mold. Terminals: Solderable leads. Terminal Strength: 4.5 pounds applied to 5 terminals for 30 seconds. Solderability: Meets MIL-STD-202, Method 208. ENVIRONMENTAL SPECIFICATIONS Temperature Limits: - 65C to + 125C. www.vishay.com 21 Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics Vishay Techno DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters] 6, 8, 10 Pin Standard Profile .990 .008 [25.15 .203] .790 .008 [20.07 .203] .083 .005 [2.11 .127] .590 .008 [14.99 .203] .018 .003 [.457 .076] Pin #1 Identifier .338 .005 [8.59 .127] .135 .010 [3.43 .254] .010 .002 [.254 .051] .040 + .009 - .015 [1.02 + .229 - .381] .020 .003 [.508 .076] .100 .005 [2.54 .127] Non-Cumulative 6, 8, 10 Pin Low Profile .990 .008 [25.15 .203] .790 .008 [20.07 .203] .590 .008 [14.99 .203] .083 .005 [2.11 .127] .018 .003 [.457 .076] Pin #1 Identifier .135 .010 [3.43 .254] .010 .002 [.254 .051] .040 + .009 - .015 [1.02 + .229 - .381] .187 .005 [4.75 .127] .020 .003 [.508 .076] .100 .005 [2.54 .127] Non-Cumulative ENVIRONMENTAL PERFORMANCE TEST1 CONDITIONS MIL-PRF-83401 REQUIREMENT TYPICAL R R < 0.10% Power Conditioning (108) 100 hours at 1.5 times rated power at + 25C Group A Combined Thermal Shock (107) 5 cycles, - 65C to + 125C R 0.70% Thermal Shock Group C (107) 25 cycles, - 65C to + 125C R 0.50% R < 0.10% Short Time Overload 2.5 times rated voltage not to exceed 2 times rated power for 5 seconds R 0.25% R < 0.02% Low Temperature Storage 24 hours, no load at - 65C R 0.25% R < 0.02% Low Temperature Operation 1 hour storage, 45 minutes rated power at - 65C R 0.25% R < 0.02% High Temperature Exposure 100 hours, no load at + 125C R 0.25% R < 0.06% 240 hours with humidity ranging from 80% RH to 98% RH R 0.50% R < 0.20% Resistance to Soldering Heat (210) + 260C for 10 seconds R 0.25% R < 0.05% Shock (213) 18 shocks, 100g, 6 ms, sawtooth, 3 axes R 0.25% R < 0.04% Vibration (204) 10 to 2000Hz, 20g, 12 hours, 3 axes R 0.25% R < 0.04% Load Life (108) 1000 hours at rated power at + 70C and at rated power at + 25C R 0.50% R < 0.20% Moisture Resistance (106) 1 Numbers in parenthesis refer to test method MIL-STD-202 as modified by the detail specification. www.vishay.com 22 Document Number 68014 Revision 23-Sep-99 Models M83401/04, 05, 06, 07, 08, 09; C & G Schematics Vishay Techno % OF RATED WATTAGE DERATING POWER RATING 130 110 25 70 90 70 50 30 - 60 The power rating listed for each network is based on continuous full-load operation at an ambient temperature of + 70C. When the network is operated at temperatures other than + 70C, the power rating should be scaled linearly as shown. - 30 0 30 60 90 120 150 AMBIENT TEMP. DEG. CENTIGRADE HOW TO ORDER - MILITARY PART NUMBER M83401 MILITARY SPECIFICATION NUMBER 06 SIZE K CHARACTERISTIC 1003 VALUE F TOLERANCE C SCHEMATIC 04 = 6 Pin Standard Profile SIP 05 = 8 Pin Standard Profile SIP 06 = 10 Pin Standard Profile SIP 07 = 6 Pin Low Profile SIP 08 = 8 Pin Low Profile SIP 09 = 10 Pin Low Profile SIP K = 100PPM/C M = 300PPM/C First three digits are significant figures. Last digit specifies number of zeros to follow. Use R as decimal point for value less than 100 ohms. Example: 30R0 = 30 Ohms. F = 1% G = 2% J = 5% C = Common Bus G = Isolated EXAMPLE: M8340106M1003FC = A single-in-line resistor network with 10 pins, a standard profile, a TCR of 300PPM/C, resistance value of 100 kilohms, tolerance of 1% and to Schematic C. Document Number 68014 Revision 23-Sep-99 www.vishay.com 23