MINIATURE RELAY 2 POLES--1 to 2 A (FOR SIGNAL SWITCHING) NA SERIES RoHS compliant n FEATURES Slim type relay for high density mounting Conforms to Bellcore specification and FCC Part 68 --Dielectric strength 1,500 VAC between coil and contacts --Surge strength 2,500 V between coil and contacts (at 2 x 10 s surge wave) l Maximum switching capability - 4.2A, 700VAC l UL, CSA recognized l High sensitivity and low consumption power l High reliability--bifurcated contacts l DIL pitch terminals l Plastic sealed type l RoHS compliant since date code: 0437B8 Please see page 7 for more information l l n ORDERING INFORMATION [Example] NA L - D 12 W - K (a) (b) (*) (c) (d) (e) (f ) (a) (b) Series Name NA: NA Series Operation Function Nil : Standard type L : Latching type (c) Number of Coil Nil : Single winding type D : Double winding type (d) Nominal Voltage Refer to the COIL DATA CHART (e) Contact W : Bifurcated type (f ) Enclosure K : Plastic sealed type Note: Actual marking omits the hyphen (-) of (*) n SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 478 (File No. E45026) C22.2 No. 0, No. 14, No. 950 (File No. LR35579) Only UL/CSA approval markings are marked on the cover. Nominal voltage 1.5 to 48 VDC Contact rating 0.5 A 125 VAC 2 A 30 VDC 0.3 A 110 VDC resistive NA SERIES n SPECIFICATIONS Item Contact Arrangement 2 form C (DPDT) Material Gold overlay silver alloy Style Bifurcated Resistance (initial) Maximum 50 m (at 1 A 6 VDC) Rating (resistive) 0.5 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2A Maximum Switching Power 62.5 AV, 30 W Maximum Switching Voltage 250 VAC, 220 VDC Maximum Switching Current 2A Minimum Switching Standard Type Single Winding Latching Type Double Winding Latching Type NA-( ) W-K Load*1 NAL-( ) W-K NAL-D ( ) W-K 0.01 mA 10 mVDC Capacitance Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) Coil Nominal Power (at 20C) 0.14 to 0.3 W 0.1 to 0.15 W Operate Power (at 20C) 0.08 to 0.17 W 0.06 to 0.085 W Operating Temperature -40C to +85C (no frost)(refer to the CHARACTERISTIC DATA) Time Value Operate (at nominal voltage) Maximum 6 ms Release (at nominal voltage) Maximum 4 ms Insulation Resistance (at 500 VDC) Minimum 1,000 M between open contacts Dielectric between adjacent contacts Strength between coil and contacts 1,000 VAC 1 minute 1,000 VAC 1 minute Surge between open contacts 1,500 V (at 10 x 700 s) between adjacent contacts Strength between coil and contacts 1,500 V (at 10 x 700 s) 2,500 V (at 2 x 10 s) Life Mechanical 1 x 108 operations minimum 1 x 107 operations minimum Electrical 2 x 105 ops. min. (0.5 A 125 VAC), 5 x 105 ops. min. (1 A 30 VDC) Other Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) 0.20 to 0.3 W 0.115 to 0.17 W Maximum 6 ms (set) Maximum 6 ms (reset) 1,500 VAC 1 minute 1,000 VAC 1 minute 1,500 V (at 10 x 160 s) 10 to 55 Hz (double amplitude of 5.0 mm) Shock Misoperation Resistance Endurance 500 m/s2 (11 1 ms) 1,000 m/s2 ( 6 1 ms) Weight Approximately 1.5 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and NA SERIES n COIL DATA CHART MODEL Nominal voltage Coil resistance (10%) Must operate voltage*1 Must release voltage* Nominal power 1.5 VDC 16.1 +1.13 VDC +0.15 VDC 140 mW NA-1.5 W-K NA- 3 W-K 3 VDC 64.3 +2.25 VDC +0.3 VDC 140 mW NA-4.5 W-K 4.5 VDC 145 +3.38 VDC +0.45 VDC 140 mW NA- 5 W-K 5 VDC 178 +3.75 VDC +0.5 VDC 140 mW NA- 6 W-K 6 VDC 257 +4.5 VDC +0.6 VDC 140 mW NA- 9 W-K 9 VDC 579 +6.75 VDC +0.9 VDC 140 mW NA-12 W-K 12 VDC 1,028 +9.0 VDC +1.2 VDC 140 mW NA-18 W-K 18 VDC 1,620 +13.5 VDC +1.8 VDC 200 mW NA-24 W-K 24 VDC 2,880 +18.0 VDC +2.4 VDC 200 mW NA-48 W-K 48 VDC 7,680 +36.0 VDC +4.8 VDC 300 mW Standard Type *1 Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20C. MODEL NAL-1.5W-K Coil resistance (10%) 1.5 VDC 22.5 Set voltage +1.13 VDC Reset voltage Nominal power -1.13 VDC 100 mW Single Winding Latching Type Nominal voltage NAL- 3 W-K 3 VDC 90 +2.25 VDC -2.25 VDC 100 mW NAL-4.5W-K 4.5 VDC 203 +3.38 VDC -3.38 VDC 100 mW NAL- 5 W-K 5 VDC 250 +3.75 VDC -3.75 VDC 100 mW NAL- 6 W-K 6 VDC 360 +4.5 VDC -4.5 VDC 100 mW NAL- 9 W-K 9 VDC 810 +6.75 VDC -6.75 VDC 100 mW NAL-12 W-K 12 VDC 1,440 +9.0 VDC -9.0 VDC 100 mW NAL-18 W-K 18 VDC 2,160 +13.5 VDC -13.5 VDC 150 mW NAL-24 W-K 24 VDC 3,840 +18.0 VDC -18.0 VDC 150 mW NAL-D1.5W-K 1.5 VDC P 11.25 +1.13 VDC S 11.25 +1.13 VDC 200 mW NAL-D 3 W-K 3 VDC S NAL-D4.5W-K 4.5 VDC S NAL-D 5 W-K 5 VDC S NAL-D 6 W-K 6 VDC S NAL-D 9 W-K 9 VDC S NAL-D12 W-K 12 VDC S 45 +2.25 VDC 45 +2.25 VDC 200 mW 101 +3.38 VDC 101 +3.38 VDC 200 mW 125 +3.75 VDC 125 +3.75 VDC 200 mW 180 +4.5 VDC 180 +4.5 VDC 200 mW 405 +6.75 VDC 405 +6.75 VDC 200 mW 720 +9.0 VDC 720 +9.0 VDC 200 mW NAL-D18 W-K 18 VDC P 1,080 +13.5 VDC S 1,080 +13.5 VDC 300 mW NAL-D24 W-K 24 VDC P 1,920 +18.0 VDC S 1,920 +18.0 VDC 300 mW Double Winding Latching Type P P P P P P Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20C. P: Primary coil S: Secondary coil NA SERIES n CHARACTERISTIC DATA High Frequency Characteristics (Insertion Loss) High Frequency Characteristics (Isolation) NA-12W-K n=2 Transmission impedance 75 Note: In standard PC board for measurement betweem common and make contacts 100 50 1.8 1.6 Insertion Loss (dB) Isolation (dB) 150 NA-12W-K n=2 Transmission impedance 75 Note: In standard PC board for measurement betweem common and make contacts 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 3 5 7 10 30 50 70 100 300 500 700 1000 Frequency (MHz) 0 1 3 5 7 10 30 50 70 100 300 500 700 1000 Frequency (MHz) NA SERIES n REFERENCE DATA NA SERIES n DIMENSIONS l Dimensions l Schematics (Bottom View) NA, NAL type (Non-latching type, single winding latching type) l PC board mounting hole layout (Bottom View) NAL-D type (double winding latching type) Unit: mm NA SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. NA SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 11/08/2005.