E5 Cam Latches 116 Overview Modularity and simplicity in action The SOUTHCO(R) E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of the three basic components (access style driver, latch body or cam) in either geometry or material, the E5 can be easily adjusted to suit most applications. Product features AA AA AA AA AA Cost effective, easy to design and install Multiple material and access options to suit multiple needs Suitable to meet NEMA 4 / IP65 sealing standards Corrosion-resistant materials available Highly modular and configurable Match material and finish options for style and functionality requirements A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes: Chrome plated Black powder coated Corrosion resistant materials available 316 Stainless steel Glass-filled nylon, black 304 Stainless steel Select one of these four styles to fit your access requirements There are four basic E5 styles to meet specific door configuration and mounting requirements in terms of design, depth, surface protrusion and operation style. 27.2 (1.07) 36 (1.42) 23.7 (0.93) A 46 (1.81) 45mm www.southco.com E5 Standard E5 Low Profile E5 Push-to-Close E5 Flush Cup Wing Knob Industry standard, highly modular and configurable options in a wide choice of materials, finishes and access styles. (See page 118) Stylish, low profile design. Tool and hand operated access styles in zinc alloy chrome plated or black powder coated. (See page 120) Standard E5 with the added functionality of a springloaded cam or actuator for single or multi-point operation. Provides quicker turn-to-open, push-to-close action. (See page 128) Stylish oval cup design. Provides a clean, flush outer surface. Ideal for multi-point actuation of large doors in aesthetically pleasing applications. (See page 122) Dimensions in millimeters (inch) unless otherwise stated 117 Choose from a wide range of operating styles to fit application and industry requirements. 6 21 y Ke s c ni re) tro llco c Ele (Be AA Convenient hand-operated wing knob, T and L-handle styles for easy hand access AA Tool operated for restricted access, flush-mount or low-profile clearances, and industry-specifc standards AA Key operated for added security Tool / key operable 8 (.32) Triangle 9 (.35) Triangle Slotted Recessed slot 8 (.32) Square Railway standard 8 (.32) Hex recess Bellcore 216 Bellcore electronics ng 7 (.28) Triangle wi Sh ort 8 (.32) Square recess ) .19 bit 5 ( ble u Do ) .11 bit 3 ( ble u Do ) .19 bit 5 ( ble u Do 7 (.28) Square ) ss .32 ce 8 ( re re ua Sq ng wi ll Ta ) .28 le 7 ( iang Tr Cylinder lock ) .11 bit 3 ( ble u Do Sh 5 (.19) Double bit 6 (.24) Square ) .28 e 7 ( quar S ) .28 le 7 ( iang Tr Flush wing Tall wing 3 (.11) Double bit ) ss .32 ce 8 ( re re ua Sq Short wing o Wing knob non-locking ) .32 e 8 ( quar S L-handle non-locking ) .32 le 8 ( iang Tr L-handle key-locking Wing knob locking ) .32 ess 8 ( rec ) x .32 le He 8 ( iang Tr T-handle non-locking ) .28 e 7 ( quar S ) .32 e 8 ( quar S T-handle key-locking r inlglco tr wBe e2 16 l Be re lco y Ke nigcs ) i ll wron ore Tlaect ellc E (B Hand operable Total grip includes the dimensions of all elements in-between the mounting surface of the latch and the latch's contact surface on the frame - including door thickness, compressed seals and gaskets, accessories, frame offset, etc. Some SOUTHCO(R) E5 latches are shipped latch and cam separately and some completely pre-assembled. See product pages for details. Slo 7) (.0 7) 2 (.0 Grip d tte Slo 15 58) (. 2 15 58) (. ) .32 ess 8 ( rec x He Installation d tte Determine your grip options for a perfect fit Cam Screw Sealing washer Mounting nut Selecting the right cam for the E5 is easy once the total grip is known. Southco provides a wide selection of standard cams in many grip increments, and special ones like hook and push-to-close cams. Standard cams provide vibration resistance and grip variation tolerance. E5 Standard E5 Low Profile Latch and cam shipped separately. Latch and cam shipped pre-assembled. Dimensions in millimeters (inch) unless otherwise stated E5 Cam Latch 118 Stainless steel * Tool operated * Fixed grip 5 (.20) * Single hole install * Latched / unlatched indicator * EN 45545-3 E60 Compliant 19 (.75) Material and Finish +0.1 20.1 -0 (.79 +.004 ) -.000 Cam 45 (1.77) 4 (.16) 364 (1.42.15) Performance Details Grip 28 (1.10) Mounting nut O 28 (1.10) Stainless steel, 304 or 316 grade Maximum static load: 304 Stainless steel 550 N (124 lbf) 316 Stainless steel 670 N (150 lbf) 0.5 (.02) Sealing washer (compressed) 23 (.91) Screw M6 thread Frame ACTUAL SIZE Door Internal O-ring Sealing Notes NEMA 4 / IP65 achieved using gasket supplied (.89 O 22.5 +0.5 -0 Installation Notes +.02 -.00 ) Internal spring 6 (.24) Max. 1 (.04) Min. Mounting nut: Maximum tightening torque: 20 Nm (177 inlbf) Screw Maximum tightening torque 10 Nm (90 inlbf) Optional Detent Version Detent housing prevents accidental cam movement. Cam securely detents in place both in open and closed positions. H Head Styles Keys and Accessories Slotted See page 130 8 (.32) Hex recess 7 (.28) Triangle 8 (.31) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit Bellcore 216 Railway standard Part Number Selection ________________________________________________________________________________ See table Order latch and cam separately Latch Part Number (no cam) E5 - B - H M - UU1 H 00 01 02 03 04 Head style Slotted 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 05 06 07 13 22 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit Bellcore 216 Railway standard M Material 24 304 Stainless steel 27 316 Stainless steel B Body 6 Normal housing 32 Detented housing Cam Part Number Table (order separately from latch) Grip +2(.08) - 0 (.00) Part Number 304 Stainless steel 316 Stainless steel Grip +2(.08) - 0 (.00) Part Number 304 Stainless steel 316 Stainless steel Grip +2(.08) - 0 (.00) Part Number 304 Stainless steel 316 Stainless steel Grip +2(.08) - 0 (.00) Part Number 304 Stainless steel 316 Stainless steel 4 (.16) E5-8003 E5-9003 14 (.55) E5-8008 E5-9008 24 (.94) E5-8013 E5-9013 34 (1.34) E5-8018 E5-9018 6 (.24) E5-8004 E5-9004 16 (.63) E5-8009 E5-9009 26 (1.02) E5-8014 E5-9014 36 (1.42) E5-8019 E5-9019 8 (.31) E5-8005 E5-9005 18 (.71) E5-8010 E5-9010 28 (1.10) E5-8015 E5-9015 38 (1.50) E5-8020 E5-9020 10 (.39) E5-8006 E5-9006 20 (.79) E5-8011 E5-9011 30 (1.18) E5-8016 E5-9016 40 (1.57) E5-8021 E5-9021 12 (.47) E5-8007 E5-9007 22 (.87) E5-8012 E5-9012 32 (1.25) E5-8017 E5-9017 42 (1.65) E5-8022 E5-9022 www.southco.com/E5 Dimensions in millimeters (inch) unless otherwise stated E5 Cam Latch 119 Zinc * Tool operated * Fixed grip 5 (.20) 19 (.75) 0.5 (.02) Sealing washer (compressed) Grip 27.2 (1.07) +0.1 Cam 4 (.16) 364 (1.42.15) 20.1 -0 (.79 +.004 ) -.000 * EN 45545-3 E10 Compliant Mounting nut O 28 (1.10) 23 (.91) Material and Finish Zinc alloy, powder coated or chrome plated and steel, zinc plated 45 (1.77) Frame Screw M6 thread Performance Details Door Maximum static load: 330 N (74 lbf) Internal O-ring O 22.5 +0.5 -0 (.89 +.02 -.00 ) * Single hole install * Latched / unlatched indicator Installation Notes Mounting nut: Maximum tightening torque: 10 Nm (88 inlbf) Internal spring Screw Maximum tightening torque: 5 Nm (45 inlbf) 6 (.24) Max. 1 (.04) Min. Sealing Notes NEMA 4 / IP65 achieved using gasket supplied H Head Styles Keys and Accessories Slotted Bellcore electronics 8 (.32) Hex recess Recessed slot (tamper resistant) 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit 8 (.32) Square recess Bellcore 216 See page 130 Notes Suitable for push-to-close action see page 128 Railway standard ___________________________________________________________________________ Part Number Selection Latch Part Number (no cam) E5 - 6 - H F - UU1 F Finish 2 Bright chrome 5 Black powder coated H 00 01 02 03 04 05 06 Head style Slotted 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit See table 07 08 13 19 21 5 (.19) Double bit 8 (.32) Square recess Bellcore 216 Bellcore electronics Recessed slot (tamper resistant) 22 Railway standard Order latch and cam separately Cam Part Number Table (order separately from latch) Grip +2(.08) - 0 (.00) Part Number Grip +2(.08) - 0 (.00) Part Number Grip +2(.08) - 0 (.00) Part Number Grip +2(.08) - 0 (.00) Part Number 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch Low Profile 120 Zinc * Tool or hand operated * Fixed grip * Single hole install * Latched / unlatched indicator * Shipped fully assembled * EN 45545-3 E10 Compliant Drive stud O 31 (1.22) D Door thickness 45 (1.77) 7.5 (.30) for Bellcore 216 4.5 (.18) for all other head styles except wing versions H Head Styles G Grip Housing Mounting nut M 22 X 1.5 thread Cam Detent washer Screw M6 thread 23.7 (.93) For short housing 31.7 (1.25) For long housing Material and Finish Zinc alloy, powder coated or chrome plated and steel, zinc plated 364 (1.42.15) Performance Details Maximum static load: 330 N (74 lbf) +0.1 20.1 0 (.79 +.004 ) -.000 Installation Notes 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit Frame Door 14.5 (.57) 8 (.32) Square recess Mounting nut Maximum tightening torque: 10 Nm (88 inlbf) O 22.5 Keys and Accessories See page 130 Slotted +.5 -.0 (.89 +.02 -.00 19.5 (.77) Short wing Tall wing ) 14 (.55) Max 1 (.04) Min Bellcore 216 Bellcore electronics Part Number Selection ________________________________________________________________________________ See table Latch is shipped fully assembled For door thicknesses 1 - 6 (.039 - .236) grip must exceed door thickness by 4 (.157) for assembled installation When sealing option is selected, add 0.4 (.02) to grip calculation to accommodate sealing washer H 00 01 02 03 04 05 06 Head style Slotted 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit 07 08 11 12 13 19 F Finish 1 Textured chrome 5 Black powder coated 5 (.19) Double bit 8 (.32) Square recess Short wing Tall wing Bellcore 216 Bellcore Electronics S Sealing option 0 No o-ring or external seal 1 O-ring and external seal to meet NEMA 4/IP65 standards E5 - D - H F - G S D Door thickness range 1 1 - 6 (.039 - .236) (short housing supplied) 2 1 - 14 (.039 - (.551) (long housing supplied) G Grip table Grip Grip Grip Short housing Long housing G Short housing Long housing G Short housing Long housing G Short housing Long housing 00 Do not use 6 (.24) 05 8 (.31) 16 (.63) 10 18 (.71) 26 (1.02) 15 28 (1.10) 36 (1.42) 01 Do not use 8 (.31) 06 10 (.39) 18 (.71) 11 20 (.79) 28 (1.10) 16 30 (1.18) 38 (1.50) 02 2 (.08) 10 (.39) 07 12 (.47) 20 (.79) 12 22 (.87) 30 (1.18) 17 32 (1.25) 40 (1.57) 03 4 (.16) 12 (.47) 08 14 (.55) 22 (.87) 13 24 (.94) 32 (1.25) 18 34 (1.34) 42 (1.65) 04 6 (.24) 14 (.55) 09 16 (.63) 24 (.94) 14 26 (1.02) 34 (1.34) 19 36 (1.42) 44 (1.73) If grip falls between two choices, use the smaller option www.southco.com/E5 Grip G Dimensions in millimeters (inch) unless otherwise stated E5 Cam Latch 121 Glass-filled nylon * Tool or hand operated * Fixed grip O O ( ) ( ( ) ) ( * Single hole install * Corrosion-resistant materials ) Material and Finish O ( ) ( 0.5 (.02) Sealing washer (Compressed) ( 6 (.24) G Grip L Glass-filled nylon and Stainless steel ) Performance Details 0.5 (.02) Sealing washer (Compressed) ) Average ultimate load: 300 N (68 lbf) Installation Notes G Grip L Mounting nut Maximum tightening torque: 4.25 N*m (38 in*lbf) Mounting nut Mounting nut ACTUAL SIZE ( ( ) ( ( Sealing Notes ) NEMA 4 / IP65 achieved using gasket supplied ) ) Keys and Accessories 264 (1.02.16) See page 130 ACTUAL SIZE Frame 20.1+0.1 -0 Door (.79 +.004 ) -.000 H Head Styles +.02 O 22.5+0.5 -0 (.89 -.00 ) 6 (.24) Max. 1 (.04) Min. Slotted 8 (.32) Triangle 8 (.32) Square 3 (.11) Double bit Wing knob ___________________________________________________________________________ Part Number Selection Latch Part Number H 00 03 05 06 30 E5 - 4 - H 3 - G 1 See table Head style Slotted 8 (.32) Triangle 8 (.32) Square 3 (.11) Double bit Wing knob G Grip table Total Grip G L Max. Door Thickness for Assembled Latch Total Grip G L Max. Door Thickness for Assembled Latch Total Grip G L Max. Door Thickness for Assembled Latch 16 (.63) 16 30 (1.18) 5 (.20) 24 (.94) 24 38 (1.50) 6 (.24) 30 (1.18) 30 44 (1.73) 6 (.24) 18 (.71) 18 32 (1.26) 5 (.20) 25 (.98) 25 39 (1.54) 6 (.24) 32 (1.26) 32 46 (1.81) 6 (.24) 20 (.79) 20 34 (1.34) 6 (.24) 26 (1.02) 26 40 (1.57) 6 (.24) 34 (1.34) 34 48 (1.89) 6 (.24) 22 (.87) 22 36 (1.42) 6 (.24) 28 (1.10) 28 42 (1.65) 6 (.24) 36 (1.42) 36 50 (1.97) 6 (.24) Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch 122 Zinc * Flush cup wing style * Hand operated * Fixed grip Single Point * Low profile * Multiple key code options Two Point (for use with rods) Material and Finish Actuator (supplied) 3.5 (.14) Rods (contact Southco 9.2 (0.36) for options) Two point actuator 31 (1.22) (order separately, see page 131) Rod clearance Mounting nuts 10-24 UNC (supplied) maximum tightening torque: 3 Nm (25 inlbf) Maximum door thickness 3.2 (.125) Keys See page 130 Notes Two point push-to-close action: Internal spring causes return of wing knob and actuator to original latched position when wing knob is released after opening. Ideal for use with cables and rotary latches. Cables 19 (.75) 96 (3.8) Installation Notes Screw maximum tightening torque: 10 Nm (90 inlbf) Actuator (supplied) Mounting nut 2.4 (.094) 4.4 (.18) 46 4 (1.8) (.16) Screw M6 thread O 5.5 0.1 (.22.004) 23 (.91) 60 (2.36) O 6.1 (.24) Single point cam 36 (1.42) 2X 8.1 (.32) Door 20 (.80) 514 (2.00.16) Single point only 400.2 R1 (04) (1.57.008) O 65.50.5 (2.58.02) 6.5 (.26) Grip For lock core selection and a Type A (reverse frame for type B) complete overview of the SOUTHCO(R) 2 Holes Key-Choice System see page 158 www.southco.com/E5 55 (2.18) Type A Zinc alloy, powder coated and steel, zinc plated Maximum static load: 330 N (74 lbf) (spring-loaded) 46 (1.8) 76 (3.0) Performance Details Two Point Push-to-Close Action 5.2 (.20) 800.3 20 (.79) (3.14.01) 6 (.24) 2 (.08) 36 (1.41) R3 (.12) Frame Dimensions in millimeters (inch) unless otherwise stated 2.7 (.10) ACTUAL SIZE 15.2 (.59) 18 (.7) 51 (2.0) 123 R Rotation Type "A" Type "B" Turn clockwise to latch Turn counter-clockwise to latch L Lock Styles Non-locking Key-locking key code CH751 Key-locking key code R001 Key-locking (order lock core separately) ___________________________________________________________________________ Part Number Selection E5 - 9 R - L 5 - A S - 1 K R Rotation 1 Type A clockwise to latch 2 Type B counterclockwise to latch L 30 31 32 See table S Sealing option 0 Non-sealing (when A = TR or TL) 1 Sealed (when A = UU or RR) Latch Part Number (no cam) A UU RR TR TL Single point Order latch and cam separately Two point (for use with rods) K Key options 0No keys supplied (order separately, see page 130) 3 1 Overmolded key supplied Order latch only (two point actuator supplied) Assembly status Single point order cam separately Two point (for use with rods) - actuator supplied Type A two point push-to-close (order actuator separately) Type B two point push-to-close (order actuator separately) Lock Style Non-locking (omit last 2 digits from part number) Key-locking black lock core keyed alike CH751 Key-locking stainless steel scalp and shuttered lock core keyed alike R001 33 Without lock core (omit last 2 digits from part number) Order lock core separately, see page 158 Two point push-to-close action (spring loaded) Order latch and actuator separately. Actuator part number A5-91-201-11, see page 131 for details. To be used with SOUTHCO(R) R4 rotary series latches and cables see page 272. Cam Part Number Table (order separately from latch) Grip Part Number Grip Part Number 22.7 (.89) E5-6603 30.7 (1.21) E5-6607 24.7 (.97) E5-6604 32.7 (1.29) E5-6608 26.7 (1.05) E5-6605 34.7 (1.37) E5-6609 28.7 (1.13) E5-6606 36.7 (1.44) E5-6610 If grip falls between two choices, use the smaller option Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch 124 Zinc * L-handle * Hand operated * Fixed grip * Single hole install * Multiple key codes Material and Finish Zinc alloy, powder coated or chrome plated and steel, zinc plated 36 (1.42) 0.5 (.02) Sealing washer (compressed) 112.5 (4.42) O 28 O 25 (1.10) (.98) 17.9 (.7) Door Grip 27 (1.06) 4 (.16) Frame Performance Details 23 (.91) Maximum static load: 330 N (74 lbf) NEMA 4 / IP65 achieved using gasket supplied 364 (1.42.15) ACTUAL SIZE Installation Notes Mounting nut: Maximum tightening torque: 10 Nm (88 inlbf) Screw maximum tightening torque: 10 Nm (90 inlbf) +0.1 20.1 -0 (.79 +.004 ) -.000 Frame Door L Lock Style (.89 O 22.5 +0.5 -0 Keys +.02 -.00 ) 6 (.24) Max. 1 (.04) Min. See page 130 Notes Non-locking Suitable for push-to-close action see page 128 Key-locking Key code CH751 Key-locking Key code R001 Key-locking (order lock core separately) For lock core selection and a complete overview of the SOUTHCO(R) Latch Part Number Key-Choice System see page 158 For adjustable grip versions see page 134 45 (1.77) Screw M6 thread Sealing Notes F Finish 2 Bright chrome 5 Black powder coated (no cam) E5 - 9 - L F - UU1 - 1 K Part Number Selection Order latch and cam separately L 70 71 72 73 Lock style Non-locking (omit last two digits of part number) Keyed CH751 (lock core finish matches handle finish) Keyed R001 (stainless steel scalp shuttered) Without lock core (omit last two digits of part number) Order lock core separately, see page 158 K Key options 0No keys supplied (order separately, see page 130) 3 1 Overmolded key supplied Cam Part Number Table (order separately from latch) Grip Part Number Grip Part Number Grip Part Number Grip Part Number 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option www.southco.com/E5 Dimensions in millimeters (inch) unless otherwise stated E5 Cam Latch 125 Zinc * T-handle * Hand operated * Fixed grip 0.5 (.02) Sealing washer (compressed) Door 22 (.88) O 28 (1.10) * Single hole install * Multiple key codes 32 (1.25) Material and Finish Grip 27 (1.06) 4 (.16) Frame 82.5 (3.25) Performance Details 23 (.91) 45 (1.77) Screw M6 thread Maximum static load: 330 N (74 lbf) Sealing Notes NEMA 4 / IP65 achieved using gasket supplied 364 (1.42.15) ACTUAL SIZE +0.1 20.1 -0 (.79 +.004 ) -.000 Frame Door (.89 O 22.5 +0.5 -0 +.02 -.00 Screw: Maximum tightening torque: 10 Nm (90 inlbf) ) 6 (.24) Max. 1 (.04) Min. Key-locking key code CH751 Key-locking key code R001 with shutter Keys See page 130 Key-locking (order lock core separately) Notes Suitable for push-to-close action see page 128 F Finish 2 Bright chrome 5 Black powder coated Latch Part Number (no cam) For adjustable grip versions see page 134 For lock core selection and a complete overview of the SOUTHCO(R) Key-Choice System see page 158 E5 - 9 - L F - UU1 - 1 K L 60 61 62 63 Lock style Non-locking (omit last two digits of part number) Keyed CH751 (lock core finish matches handle finish) Keyed R001 (stainless steel scalp shuttered) Without lock core (omit last two digits of part number) Order lock core separately, see page 158 Installation Notes Mounting nut: Maximum tightening torque: 10 Nm (88 inlbf) L Lock Style Non-locking Zinc alloy, powder coated or chrome plated and steel, zinc plated K Key options 0 No keys supplied (order separately, see page 130) 3 1 Overmolded key supplied Part Number Selection Order latch and cam separately Cam Part Number Table (order separately from latch) Grip Part Number Grip Part Number Grip Part Number Grip Part Number 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch 126 Zinc * Wing style * Padlockable wing style * Fixed grip * Single hole install * Multiple key codes 56 (2.00) Wing 21 (.83) Material and Finish Wing: Zinc alloy, black powder coated and steel, zinc plated Padlockable wing: Zinc alloy, chrome plated and steel, zinc plated 19 (.75) O 28 (1.10) Door Grip 27 (1.06) Sealing Notes Frame 4 (.16) Performance Details Maximum static load: 330 N (74 lbf) 0.5 (.02) Sealing washer (compressed) Screw M6 thread 23 (.91) 45 (1.77) L Lock Styles Wing style sealed to meet NEMA 4 / IP65 standards ACTUAL SIZE Installation Notes Mounting nut maximum tightening torque: 10 Nm (88 inlbf) Screw Maximum tightening torque: 5 Nm (45 inlbf) Keys See page 130 Notes Wing style suitable for push-toclose action see page 128 For lock core selection and a complete overview of the SOUTHCO(R) Key-Choice System see page 158 Part Number Selection Non-locking Key-locking key code CH751 Key-locking key code R001 with shutter Key-locking lock core (order separately) Latch Part Number K Key options 0No keys supplied (order separately, see page 130) 3 1 Overmolded key supplied (no cam) E5 - 9 - L 5 - UU1 - 1 K L 30 31 32 33 Lock style Non-locking (omit last two digits of part number) Key-locking black lock core keyed alike CH751 Key-locking stainless steel scalp and shuttered lock core keyed alike R001 Without lock core (omit last two digits of part number) Order lock core separately, see page 158 Order latch and cam separately Cam part number see table page 127 Padlockable Wing 16.5 (.66) 0.5 (.02) Sealing washer O 28 (1.10) 50 (1.97) Door 19 (.75) ACTUAL SIZE Padlock thru hole O 8 (.31) 27.5 (1.08) Grip Frame 4 (.16) Screw M6 thread 23 (.91) 45 (1.77) Part Number Selection ________________________________________________________________________________ See table Order latch and cam separately Cam part number see table page 127 www.southco.com/E5 R Rotation 1 Type B counter-clockwise to latch 2 Type A clockwise to latch Dimensions in millimeters (inch) unless otherwise stated Latch Part Number (no cam) E5 - 31 - 5 R 2 - UU0 E5 Cam Latch 127 Zinc * Cylinder lock * Fixed grip Cylinder Lock 5 (.20) 19 (.75) 0.5 (.02) Sealing washer (compressed) Grip Frame Door 27.2 (1.07) Mounting nut O 28 (1.10) * Single hole install * Latched / unlatched indicator Cam 4 (.16) Screw M6 thread Material and Finish Zinc alloy, powder coated and steel, zinc plated Scalp stainless steel 23 (.91) 45 (1.77) Performance Details Maximum static load: 330 N (74 lbf) ACTUAL SIZE Installation Notes Mounting nut maximum tightening torque: 10 Nm (88 inlbf) 364 (1.42.15) +0.1 20.1 -0 (.79 +.004 ) -.000 Screw Maximum tightening torque: 5 Nm (45 inlbf) Frame Sealing Notes Door NEMA 4 / IP65 achieved using gasket supplied (.89 O 22.5 +0.5 -0 +.02 -.00 Keys and Accessories ) See page 130 Notes 6 (.24) Max. 1 (.04) Min. Suitable for push-to-close action see page 128 ___________________________________________________________________________ Part Number Selection K Key options CH751 0 No keys supplied (order separately, see page 130) 2 2 Flat keys supplied F Finish 2 Bright chrome 5 Black powder coated See table Order latch and cam separately Latch Part Number (no cam) E5 - 5 - 40 F - UU1 - 1 K Cam Part Number Table (order separately from latch) Grip Part Number Grip Part Number Grip Part Number Grip Part Number 4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018 6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019 8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020 10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021 12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022 If grip falls between two choices, use the smaller option Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch 128 Zinc * Push-to-close * Hand, key or tool operated * Single and two point * Single hole installation * Latched / unlatched indicator * Push-to-close action Single Point Spring-Loaded (Type A tool operated shown) Grip Operation 1. Push door towards frame 33 (1.30) 2. Ramp-shaped cam rotates as it contacts frame Mounting nut maximum tightening torque: 10 Nm (88 inlbf) 261.5 (.94.06) (For single point only) ACTUAL SIZE +0.1 Screw Maximum tightening torque: 5 Nm (45 inlbf) for two point actuator only Keys and Accessories Frame Screw M6 thread Maximum static load: 330 N (74 lbf) Installation Notes 21 (.83) 31 Mounting (1.22) nut 8.3 (.32) Rotation identification Zinc alloy, powder coated and steel, zinc plated Door 18 (.70) A Material and Finish Performance Details 0.5 (.02) Sealing washer (compressed) 5 (.20) O 28 (1.10) 20.1 0 (.79 +.004 ) -.000 Frame Door 3. Cam springs back and moves behind frame to achieve latching R Rotation See page 130 Notes Single Point: Push-to-close action in unlocked position only and key inserted (cylinder lock) (.89 +.02 O 22.5 +0.5 -.00 ) 0 Type "A" Type "B" Cam rotates clockwise to latch Cam rotates counter-clockwise to latch 6 (.24) Max 1 (.04) Min Two Point: Order actuator separately Two Point Spring-Loaded (Type A hand operated shown) (see page 131) For lock core selection and a complete overview of the SOUTHCO(R) Key-Choice System see page 158 55.4 (2.20) 0.5 (.02) Sealing washer (compressed) 21 (.83) O 28 (1.10) 3.5 24.9 (.14) (.98) Actuator Part Number Door Two point actuator (order separately) Mounting nut See page 131 for details Two point to be used with SOUTHCO(R) R4 rotary series latches and cables see page 272 Two point push to close action: Internal spring causes return of driver and actuator to original latched position when driver is released after opening. Ideal for use with cables and rotary latches. Screw M6 thread Two Point Actuator for bare cable Cable actuator (see notes) 55.4 (2.20) (order separately, see page 132) .5 (.02) Sealing Washer (compressed) 21 (.83) 24 (.79) Two Point Actuator (order separately) 20 (.79) Mounting Nut Cable Bracket www.southco.com/E5 Dimensions in millimeters (inch) unless otherwise stated AC Cable assembly, jacketed (see Notes) 129 Hand / Key Operated Part Number Selection F Finish 2 Bright chrome (not available for wing type) 5 Black powder coated R 51 52 TR TL T Type 5 Cylinder lock keyed alike CH751 9 Wing / T-handle / L-handle Latch supplied fully assembled Rotation Type A single point (for visual identification cam stamped A or B) Type B single point (for visual identification cam stamped A or B) Type A two point (order actuator separately) Type B two point (order actuator separately) K Key options 0No keys supplied (order separately, see page 130) 3 1 Overmolded key supplied E5 - T - L F - R 0 - 1 K L T=5 T=9 Lock style Cylinder Lock Wing T-handle L-handle Non-locking (omit last two digits of part number) ~ 30 60 70 Keyed CH751 (lock core finish matches handle finish) ~ 31 61 71 Keyed CH751 (stainless steel scalp shuttered) 40 ~ ~ ~ Keyed R001 reversible (stainless steel scalp shuttered) ~ 32 62 72 Without lock core (omit last two digits of part number) (to be ordered separately see page 158) ~ 33 63 73 Tool Operated H Head Styles Slotted 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit 8 (.32) Square recess Bellcore 216 Bellcore electronics Recessed slot (tamper resistant) Railway standard Part Number Selection Latch supplied fully assembled F Finish 2 Bright chrome 5 Black powder coated H 00 01 02 03 04 Head style Slotted 8 (.32) Hex recess 7 (.28) Triangle 8 (.32) Triangle 7 (.28) Square E5 - 6 - H F - R 0 05 06 07 08 13 8 (.32) Square 3 (.11) Double bit 5 (.19) Double bit 8 (.32) Square recess Bellcore 216 19 Bellcore electronics 21 Recessed slot (tamper resistant) 22 Railway standard R Rotation 51 Type A single point (for visual identification, cam stamped A or B) 52 Type B single point (for visual identification, cam stamped A or B) TR Type A two point (order actuator separately) TL Type B two point (order actuator separately) Dimensions in millimeters (inch) unless otherwise stated E5 Cam Latch Accessories 130 Keys Material and Finish Keys Zinc or Nylon 55 (2.2) Tool key: Zinc alloy or nylon Overmolded key: Nickel plated and ABS plastic black Flat key: Nickel plated H 2 3 4 7 8 9 Head style 3 (.11) Double bit 7 (.28) Triangle 7 (.28) Square 8 (.32) Triangle 8 (.32) Square recess 5 (.19) Double bit (nylon only) 10 8 (.32) Square male (zinc only) 11 Bellcore electronics 12 Bellcore 216 (zinc only) Head Styles 2 3 (.11) Double bit 56 (2.2) 3 7 (.28) Triangle 4 7 (.28) Square F 1 2 3 7 8 (.32) Triangle Finish Plated zinc Natural zinc Nylon, black 8 8 (.32) Square recess 9 5 (.19) Double bit 10 8 (.32) Square male E3 - H - F 11 Bellcore electronics 12 Bellcore 216 Part Number Overmolded key CH751: Single: PK-10-10-05 Pair: PK-10-01-05 Overmolded key R001: Single: PK-10-10-05-KR001 Pair: PK-10-01-05-KR001 Overmolded Keys Key CH751 Flat Keys Key R001 Flat key Pair: PK-10-01 www.southco.com/E5 Dimensions in millimeters (inch) unless otherwise stated Key CH751 E5 Cam Latch Accessories 131 Multi-point actuators * Dummy cam Material and Finish Multi-Point Actuator Zinc alloy 3.5 (.14) O 6.1 (.24) 15.2 (.59) Notes 6 (.23) Actuator plate (for multi-point see page 272 for cable assembly) (not recommended for key-locking) 18 (.7) 51 (2.0) Not to be used with low profile E5 Part Number A5-91-201-11 Material and Finish Multi-Point Actuator - Low Profile Steel, plated 59 (2.32) Notes 23 (.9) 23 (.9) 17 (.66) 2.4 (.09) O 6.2 (.24) 17.2 (.67) Actuator plate (for multi-point see pages 198-199 for rods) For use with all E5 latches Part Number A8-4-01-03 Multi-Point Actuator Material and Finish 93.6 (3.68) 8.1 (.31) 22.2 (.87) Zinc alloy and steel, zinc plated O 8.6 (.33) x 18 (.7) deep 4.6 (.18) 18 (.7) Actuator plate Adaptor 28.8 (1.13) Notes Actuator plate (for multi-point see page 198 for rods) Not to be used with low profile E5 Part Number A5-90-101-11 Material and Finish Dummy Cam Steel, stainless steel 4 (.16) Notes Replaces cam when used with actuator plate A5-90-101-11 in order to create a 2-point latching system O 17 (.67) 2X 8.1 (.32) 8.5 (.33) 3.8 (.15) 20 Part Number Steel H3-0-45688 Stainless Steel H3-0-45688-24 Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5 E5 Cam Latch Accessories 132 Hooked cam * Multi-point actuator * Cable brackets Material and Finish Steel plated Hook cam: Steel, plated Multi-point actuator: Zinc alloy, plated Cable bracket: Steel, plated Hooked Cam 4 (.16) 8.1 (.32) 18 (.71) O 9.95 (.39) R4 R28 18 (.71) Notes Not to be used with low profile E5 Hooked Cam Part Number 10 (.39) E5-6200 36 (.42) No stop E5-6210 Stop for clockwise rotation E5-6220 Stop for counter-clockwise rotation Multi-Point Actuator 7.5 (.3) 51 (2.0) 36 (1.42) 18 (.71) 9 (.35) 6 (.24) 3.1 (.12) 22 (.87) Part Number 2X 8.1 O3 A5-99-136 18.1 (.71) Cable Bracket - Counter Clockwise Rotation O 22.5 (.88) 38 (1.5) 52 (2.05) 2X R20 4X O 6.4 (.25) 2X 17 (.67) 2X 16 (.63) 32.4 (1.28) 2X 20.1 (.79) 2X 25 Part Number 55 (2.17) Part Number See table Notes 2 (.08) AC-0-49617-11-L 2X 43 Cable Bracket - Clockwise Rotation O 22.5 (.88) 4X O 6.4 (.25) 38 (1.5) See page 272 for additional cable assembly selections 2X 16 (.63) 32.4 (1.28) 20.1 (.79) 2X 52 2X 25 Part Number 2 (.08) www.southco.com/E5 55 (2.17) 2X R20 Dimensions in millimeters (inch) unless otherwise stated 2X 43 2X 17 AC-0-49617-11-R E5 Cam Latch Accessories 133 Sealing cover * Sealing washer * Pull tab * Padlock bracket Sealing Cover Material and Finish Sealing washer: Neoprene natural Sealing cover: Thermoplastic elastomer, black O 28.7 (1.13) Installation Notes 28 (1.09) 11.7 (.46) 47 (1.84) O 22.5 (.875) 35 (1.38) Sealing Washer (.031) 19.6 (.77) 6.9 (.27) Sealing washer 0.8 (.031) O 28.2 (1.11) To provide sealing: use two sealing washers and add compressed thickness of each washer and accessory thickness to your door thickness range. Notes Sealing washer for use with all E5 products Door Sealing cover for use with tool operated and cylinder lock E5 only Sealing washer O 22.6 (.89) Accessory Part Number Type Part Number Grip Adjustment Formula Sealing washer E5-17 Add 0.4 (0.02) compressed height to door thickness Sealing cover 90-3 Add 2.3 (.090) to door thickness Pull Tab 20 (.79) 2.4 (.093) O 22.2 (.88) 20 (.79) 16 (.63) Padlock Bracket (Round) Material and Finish 2 (.08) 25 (.98) O 22.5 (.88) 45 29 (1.78) (1.16) See table Pull tab: Nylon, black Installation Notes O 34 (1.34) 32 (1.25) O 11 (.43) Padlock Bracket (Square) 33 (1.30) O 11 (.43) 2 (.08) Shown perpendicular to latch cam Shown in-line with latch cam To provide sealing: use two sealing washers and add compressed thickness of each washer and accessory thickness to your door thickness range. Notes Padlock brackets and pull tabs for use with tool operated and cylinder lock E5 only 24.5 (.96) 42 (1.65) Padlock bracket: Stainless steel, black powder coated O 22 (.87) Type Part Number Grip Adjustment Formula Padlock bracket square E3-77-101-31 Add 2 (.08) to door thickness Padlock bracket round E3-77-102-31 Add 2 (.08) to door thickness Pull tab E5-18 Add 2.4 (.093) to door thickness Dimensions in millimeters (inch) unless otherwise stated Part Number See table www.southco.com/E5