116
116
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com
A variety of materials and finishes to complement your application.
Die-cast zinc latch bodies standard finishes:
Corrosion resistant materials available
E5 Cam Latches
Overview
The SOUTHCO® E5 cam latch is a highly modular and easy to configure solution, suitable for
a wide range of applications. By changing any of the three basic components (access style
driver, latch body or cam) in either geometry or material, the E5 can be easily adjusted to suit
most applications.
Modularity and simplicity in action
Product features
ÂCost effective, easy to design and install
ÂMultiple material and access options to suit multiple needs
ÂSuitable to meet NEMA 4 / IP65 sealing standards
ÂCorrosion-resistant materials available
ÂHighly modular and configurable
 Select one of these four styles to fit your access requirements
 Match material and finish options for style and functionality requirements
There are four basic E5 styles to meet specific door configuration and mounting
requirements in terms of design, depth, surface protrusion and operation style.
E5 Standard
Industry standard, highly
modular and configurable
options in a wide choice
of materials, finishes and
access styles.
(See page 118)
E5 Push-to-Close
Standard E5 with the added
functionality of a spring-
loaded cam or actuator
for single or multi-point
operation. Provides quicker
turn-to-open, push-to-close
action. (See page 128)
E5 Flush Cup Wing Knob
Stylish oval cup design.
Provides a clean, flush outer
surface. Ideal for multi-point
actuation of large doors
in aesthetically pleasing
applications.
(See page 122)
E5 Low Profile
Stylish, low profile design.
Tool and hand operated
access styles in zinc alloy
chrome plated or black
powder coated.
(See page 120)
Chrome plated Black powder
coated
27.2 (1.07)
23.7 (0.93)
36 (1.42)
A
45mm
304
Stainless steel
316
Stainless steel
Glass-filled
nylon, black
46 (1.81)
117
Dimensions in millimeters (inch) unless otherwise stated
3 (.11)
Double bit
5 (.19)
Double bit
7 (.28)
Triangle
8 (.32)
Triangle
7 (.28)
Square
Slotted
8 (.32) Hex
recess
8 (.32)
Square
Railway
standard
6 (.24)
Square
9 (.35)
Triangle
Hand operable Tool / key operable
Slotted 8 (.32)
Triangle
8 (.32)
Hex recess
7 (.28)
Square
7 (.28)
Triangle
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
8 (.32)
Square recess
15
(.58)
2
(.07)
Short wing Tall wing
Bellcore 216 Electronics Key
(Bellcore)
Bellcore
216
8 (.32)
Square
recess
Short wing Tall wing
 Choose from a wide range of operating styles to fit application and industry requirements.
 Determine your grip options for a perfect fit
ÂConvenient hand-operated wing knob, T and L-handle styles for easy hand access
ÂTool operated for restricted access, flush-mount or low-profile clearances, and industry-specifc standards
ÂKey operated for added security
Total grip includes the dimensions of all elements in-between
the mounting surface of the latch and the latch's contact
surface on the frame - including door thickness, compressed
seals and gaskets, accessories, frame offset, etc.
Selecting the right cam for the E5 is easy once the total
grip is known. Southco provides a wide selection of
standard cams in many grip increments, and special ones
like hook and push-to-close cams. Standard cams provide
vibration resistance and grip variation tolerance.
Cam
Grip
Sealing
washer
Screw
Mounting nut
Flush wing
L-handle
key-locking
Wing knob
non-locking
Slotted 8 (.32)
Triangle
8 (.32)
Hex recess
7 (.28)
Square
7 (.28)
Triangle
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
8 (.32)
Square recess
15
(.58)
2
(.07)
Short wing Tall wing
Bellcore 216 Electronics Key
(Bellcore)
Recessed
slot
Bellcore
electronics
L-handle
non-locking
T-handle
non-locking
T-handle
key-locking
Wing knob
locking
Installation
E5 Standard
Latch and cam shipped separately.
E5 Low Profile
Latch and cam shipped pre-assembled.
Cylinder lock
Some SOUTHCO® E5 latches are shipped latch and cam separately and some
completely pre-assembled. See product pages for details.
118
Slotted 8 (.32)
Hex recess
7 (.28)
Triangle
8 (.31)
Triangle
7 (.28)
Square
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
Bellcore 216 Railway
standard
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/E5
Cam
19 (.75)
Ø 28 (1.10)
Grip
23
(.91)
45 (1.77)
4 (.16)
28
(1.10)
5 (.20) 0.5 (.02) Sealing washer (compressed)
Screw M6 thread
Mounting
nut
6 (.24) Max.
1 (.04) Min.
36±4
(1.42±.15)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
Internal O-ring
Internal spring
ACTUAL SIZE
• Single hole install
• Latched / unlatched
indicator
• EN 45545-3 E60 Compliant
Material and Finish
Stainless steel, 304 or 316 grade
Performance Details
Maximum static load:
304 Stainless steel 550 N (124 lbf)
316 Stainless steel 670 N (150 lbf)
Sealing Notes
NEMA 4 / IP65 achieved using
gasket supplied
Installation Notes
Mounting nut:
Maximum tightening torque:
20 Nm (177 inlbf)
Screw Maximum tightening torque
10 Nm (90 inlbf)
Keys and Accessories
See page 130
E5 Cam Latch
Stainless steel · Tool operated · Fixed grip
E5 - B - H M - UU1
B Body
6 Normal housing
32 Detented housing
H Head style
00 Slotted
01 8 (.32) Hex recess
02 7 (.28) Triangle
03 8 (.32) Triangle
04 7 (.28) Square
05 8 (.32) Square
06 3 (.11) Double bit
07 5 (.19) Double bit
13 Bellcore 216
22 Railway standard
M Material
24 304 Stainless steel
27 316 Stainless steel
Cam Part Number Table (order separately from latch)
Grip
+2(.08)
- 0 (.00)
Part Number Grip
+2(.08)
- 0 (.00)
Part Number Grip
+2(.08)
- 0 (.00)
Part Number Grip
+2(.08)
- 0 (.00)
Part Number
304
Stainless
steel
316
Stainless
steel
304
Stainless
steel
316
Stainless
steel
304
Stainless
steel
316
Stainless
steel
304
Stainless
steel
316
Stainless
steel
4 (.16) E5-8003 E5-9003 14 (.55) E5-8008 E5-9008 24 (.94) E5-8013 E5-9013 34 (1.34) E5-8018 E5-9018
6 (.24) E5-8004 E5-9004 16 (.63) E5-8009 E5-9009 26 (1.02) E5-8014 E5-9014 36 (1.42) E5-8019 E5-9019
8 (.31) E5-8005 E5-9005 18 (.71) E5-8010 E5-9010 28 (1.10) E5-8015 E5-9015 38 (1.50) E5-8020 E5-9020
10 (.39) E5-8006 E5-9006 20 (.79) E5-8011 E5-9011 30 (1.18) E5-8016 E5-9016 40 (1.57) E5-8021 E5-9021
12 (.47) E5-8007 E5-9007 22 (.87) E5-8012 E5-9012 32 (1.25) E5-8017 E5-9017 42 (1.65) E5-8022 E5-9022
Part Number Selection _______________________________________________________________________________
See table
Optional Detent Version
Detent housing prevents accidental cam movement.
Cam securely detents in place both in open and
closed positions.
H Head Styles
Latch Part Number (no cam)
Order latch and cam separately
119
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5
E5 Cam Latch
Zinc · Tool operated · Fixed grip
• Singleholeinstall
• Latched/unlatched
indicator
• EN45545-3E10Compliant
MaterialandFinish
Zinc alloy, powder coated or chrome
plated and steel, zinc plated
PerformanceDetails
Maximum static load: 330 N (74 lbf)
InstallationNotes
Mounting nut:
Maximum tightening torque:
10 Nm (88 inlbf)
Screw Maximum tightening torque:
5 Nm (45 inlbf)
SealingNotes
NEMA 4 / IP65 achieved using
gasket supplied
KeysandAccessories
See page 130
Notes
Suitable for push-to-close action
see page 128
H Headstyle
00 Slotted
01 8 (.32) Hex recess
02 7 (.28) Triangle
03 8 (.32) Triangle
04 7 (.28) Square
05 8 (.32) Square
06 3 (.11) Double bit
07 5 (.19) Double bit
08 8 (.32) Square recess
13 Bellcore 216
19 Bellcore electronics
21 Recessed slot
(tamper resistant)
22 Railway standard
Slotted 8 (.32)
Hex recess
7 (.28)
Triangle
8 (.32)
Triangle
7 (.28)
Square
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
8 (.32)
Square
recess
Bellcore
216
Cam
19 (.75)
Ø 28 (1.10)
Grip
23
(.91)
45 (1.77)
4 (.16)
27.2
(1.07)
5 (.20) 0.5 (.02) Sealing washer (compressed)
Screw M6 thread
Mounting
nut
6 (.24) Max.
1 (.04) Min.
36±4
(1.42±.15)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
Internal O-ring
Internal spring
E5-6-HF-UU1
F Finish
2 Bright chrome
5 Black powder coated
CamPartNumberTable(orderseparatelyfromlatch)
Grip
+2(.08)
-0(.00)
PartNumber
Grip
+2(.08)
-0(.00)
PartNumber
Grip
+2(.08)
-0(.00)
PartNumber
Grip
+2(.08)
-0(.00)
PartNumber
4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018
6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019
8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020
10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021
12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022
HHeadStyles
Bellcore
electronics
Recessed
slot (tamper
resistant)
Railway
standard
LatchPartNumber(no cam)
Order latch and cam separately
___________________________________________________________________________ PartNumberSelection
See table
120
Latch is shipped fully assembled
For door thicknesses
1 - 6 (.039 - .236) grip must
exceed door thickness by 4 (.157)
for assembled installation
When sealing option is selected,
add 0.4 (.02) to grip calculation
to accommodate sealing washer
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/E5
• Singleholeinstall
• Latched/unlatched
indicator
• Shippedfullyassembled
• EN45545-3E10Compliant
MaterialandFinish
Zinc alloy, powder coated or chrome
plated and steel, zinc plated
PerformanceDetails
Maximum static load: 330 N (74 lbf)
InstallationNotes
Mounting nut
Maximum tightening torque:
10 Nm (88 inlbf)
KeysandAccessories
See page 130
E5 Cam Latch Low Profile
Zinc · Tool or hand operated · Fixed grip
E5-D-HF-GS
D Doorthicknessrange
1 1 - 6 (.039 - .236) (short housing supplied)
2 1 - 14 (.039 - (.551) (long housing supplied)
H Headstyle
00 Slotted
01 8 (.32) Hex recess
02 7 (.28) Triangle
03 8 (.32) Triangle
04 7 (.28) Square
05 8 (.32) Square
06 3 (.11) Double bit
07 5 (.19) Double bit
08 8 (.32) Square recess
11 Short wing
12 Tall wing
13 Bellcore 216
19 Bellcore Electronics
S Sealingoption
0 No o-ring or external seal
1 O-ring and external seal
to meet NEMA 4/IP65 standards
GGriptable
G
Grip
G
Grip
G
Grip
G
Grip
Short
housing
Long
housing
Short
housing
Long
housing
Short
housing
Long
housing
Short
housing
Long
housing
00 Do not use 6 (.24) 05 8 (.31) 16 (.63) 10 18 (.71) 26 (1.02) 15 28 (1.10) 36 (1.42)
01 Do not use 8 (.31) 06 10 (.39) 18 (.71) 11 20 (.79) 28 (1.10) 16 30 (1.18) 38 (1.50)
02 2 (.08) 10 (.39) 07 12 (.47) 20 (.79) 12 22 (.87) 30 (1.18) 17 32 (1.25) 40 (1.57)
03 4 (.16) 12 (.47) 08 14 (.55) 22 (.87) 13 24 (.94) 32 (1.25) 18 34 (1.34) 42 (1.65)
04 6 (.24) 14 (.55) 09 16 (.63) 24 (.94) 14 26 (1.02) 34 (1.34) 19 36 (1.42) 44 (1.73)
F Finish
1 Textured chrome
5 Black powder coated
14 (.55) Max
1 (.04) Min
36±4
(1.42±.15)
Frame
Ø 22.5 +.5
-.0
(.89 )
Door
20.1
(.79 )
+0.1
0
+.004
-.000
+.02
-.00
23.7 (.93) For short housing
31.7 (1.25) For long housing
7.5 (.30) for Bellcore 216
4.5 (.18) for all other head
styles except wing versions
45
(1.77) Grip
Door
thickness
Ø 31
(1.22)
Drive stud
Housing
Detent washer Cam
Screw M6 thread
Mounting nut
M 22 X 1.5 thread
DG
14.5
(.57) 19.5
(.77)
HHeadStyles
If grip falls between two choices, use the smaller option
Slotted 8 (.32)
Hex recess
7 (.28)
Triangle
8 (.32)
Triangle
7 (.28)
Square
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
8 (.32)
Square
recess
Short wing Tall wing
Bellcore
216
Bellcore
electronics
PartNumberSelection_______________________________________________________________________________
See table
121
G Grip table
Total
Grip GLMax. Door Thickness for
Assembled Latch
Total
Grip GLMax. Door Thickness for
Assembled Latch
Total
Grip GLMax. Door Thickness
for Assembled Latch
16 (.63) 16 30 (1.18) 5 (.20) 24 (.94) 24 38 (1.50) 6 (.24) 30 (1.18) 30 44 (1.73) 6 (.24)
18 (.71) 18 32 (1.26) 5 (.20) 25 (.98) 25 39 (1.54) 6 (.24) 32 (1.26) 32 46 (1.81) 6 (.24)
20 (.79) 20 34 (1.34) 6 (.24) 26 (1.02) 26 40 (1.57) 6 (.24) 34 (1.34) 34 48 (1.89) 6 (.24)
22 (.87) 22 36 (1.42) 6 (.24) 28 (1.10) 28 42 (1.65) 6 (.24) 36 (1.42) 36 50 (1.97) 6 (.24)
• Single hole install
• Corrosion-resistant
materials
Material and Finish
Glass-filled nylon and
Stainless steel
Performance Details
Average ultimate load:
300 N (68 lbf)
Installation Notes
Mounting nut
Maximum tightening torque:
4.25 N·m (38 in·lbf)
Sealing Notes
NEMA 4 / IP65 achieved using
gasket supplied
Keys and Accessories
See page 130
www.southco.com/E5
Slotted 8 (.32)
Triangle
8 (.32)
Square
3 (.11)
Double bit
Wing knob
ACTUAL SIZE
ACTUAL SIZE
6 (.24) Max.
1 (.04) Min.
26±4
(1.02±.16)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
E5 Cam Latch
Glass-filled nylon · Tool or hand operated · Fixed grip
H Head style
00 Slotted
03 8 (.32) Triangle
05 8 (.32) Square
06 3 (.11) Double bit
30 Wing knob
E5 - 4 - H 3 - G 1
H Head Styles
( )
( )
0.5 (.02) Sealing
washer (Compressed)
0.5 (.02) Sealing
washer (Compressed)
Mounting
nut
( )
6 (.24)
( )
( )
( )
( )
( )
( )
( )
( )
Ø
Ø
Ø
Grip
G
Grip
G
Mounting
nut
LL
Dimensions in millimeters (inch) unless otherwise stated
Latch Part Number
___________________________________________________________________________ Part Number Selection
See table
122
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
E5 Cam Latch
Zinc · Flush cup wing style · Hand operated · Fixed grip
• Low profile
• Multiple key code options
Material and Finish
Zinc alloy, powder coated and steel,
zinc plated
Performance Details
Maximum static load: 330 N (74 lbf)
Installation Notes
Mounting nuts 10-24 UNC
(supplied) maximum tightening
torque: 3 Nm (25 inlbf)
Screw maximum tightening torque:
10 Nm (90 inlbf)
Keys
See page 130
Notes
Two point push-to-close action:
Internal spring causes return of
wing knob and actuator to original
latched position when wing knob is
released after opening. Ideal for use
with cables and rotary latches.
For lock core selection and a
complete overview of the SOUTHCO®
Key-Choice System see page 158
Frame
2 Holes
Ø 5.5± 0.1
(.22±.004)
Ø 65.5±0.5
(2.58±.02)
40±0.2
(1.57±.008)
80±0.3
(3.14±.01)
51±4 (2.00±.16)
Single point only
Door
96
(3.8)
Maximum
door thickness
3.2 (.125) 2.4 (.094)
46
(1.8)
Single
point cam
4
(.16)
Mounting nut
Grip
60 (2.36)
76 (3.0)
19
(.75)
9.2 (0.36)
46 (1.8)
31 (1.22)
Rod clearance
Actuator
(supplied)
Actuator (supplied)
Type A
3.5 (.14)
55 (2.18)
Cables
Rods
(contact Southco
for options)
Screw M6 thread
Ø 6.1 (.24)
51 (2.0)
18 (.7)
15.2
(.59)
Two point actuator
(order separately, see page 131)
20 (.79)
2X 8.1
(.32)
36 (1.41)
R3 (.12)
R1 (04)
2.7 (.10)
6 (.24)
5.2 (.20)
2 (.08)
23
(.91)
Single Point Two Point (for use with rods) Two Point Push-to-Close Action
(spring-loaded)
Type A (reverse frame for type B)
20 (.80)
6.5 (.26)
36 (1.42)
4.4 (.18)
www.southco.com/E5
123
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5
E5 - 9 R - L 5 - A S - 1 K
R Rotation
1 Type A clockwise
to latch
2 Type B counter-
clockwise to latch
L Lock Style
30 Non-locking (omit last 2 digits from part number)
31 Key-locking black lock core keyed alike CH751
32 Key-locking stainless steel scalp and shuttered lock core
keyed alike R001
33 Without lock core (omit last 2 digits from part number)
Order lock core separately, see page 158
A Assembly status
UU Single point order cam separately
RR Two point (for use with rods) - actuator supplied
TR Type A two point push-to-close (order actuator separately)
TL Type B two point push-to-close (order actuator separately)
Single point
Order latch and cam separately
Two point (for use with rods)
Order latch only
(two point actuator supplied)
Two point push-to-close action
(spring loaded)
Order latch and actuator separately.
Actuator part number A5-91-201-11,
see page 131 for details.
To be used with SOUTHCO® R4
rotary series latches and cables
see page 272.
Cam Part Number Table (order separately from latch)
Grip Part Number Grip Part Number
22.7 (.89) E5-6603 30.7 (1.21) E5-6607
24.7 (.97) E5-6604 32.7 (1.29) E5-6608
26.7 (1.05) E5-6605 34.7 (1.37) E5-6609
28.7 (1.13) E5-6606 36.7 (1.44) E5-6610
Type
“A”
Type
“B”
Turn clockwise
to latch Turn counter-clockwise
to latch
K Key options
0 No keys supplied
(order separately, see page 130)
3 1 Overmolded key supplied
S Sealing option
0 Non-sealing (when A = TR or TL)
1 Sealed (when A = UU or RR)
Non-locking Key-locking
key code
R001
Key-locking
(order
lock core
separately)
Key-locking
key code
CH751
L Lock Styles
R Rotation
If grip falls between two choices, use the smaller option
Latch Part Number (no cam)
___________________________________________________________________________ Part Number Selection
See table
124
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/E5
• Single hole install
• Multiple key codes
Material and Finish
Zinc alloy, powder coated or chrome
plated and steel, zinc plated
Performance Details
Maximum static load: 330 N (74 lbf)
Sealing Notes
NEMA 4 / IP65 achieved using
gasket supplied
Installation Notes
Mounting nut: Maximum tightening
torque:
10 Nm (88 inlbf)
Screw maximum tightening torque:
10 Nm (90 inlbf)
Keys
See page 130
Notes
Suitable for push-to-close action
see page 128
For lock core selection and a
complete overview of the SOUTHCO®
Key-Choice System see page 158
For adjustable grip versions see
page 134
Part Number Selection
Order latch and cam separately
6 (.24) Max.
1 (.04) Min.
36±4
(1.42±.15)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
E5 Cam Latch
Zinc · L-handle · Hand operated · Fixed grip
Cam Part Number Table (order separately from latch)
Grip Part Number Grip Part Number Grip Part Number Grip Part Number
4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018
6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019
8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020
10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021
12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022
L Lock style
70 Non-locking (omit last two digits of part number)
71 Keyed CH751 (lock core finish matches handle finish)
72 Keyed R001 (stainless steel scalp shuttered)
73 Without lock core (omit last two digits of part number)
Order lock core separately, see page 158
E5 - 9 - L F - UU1 - 1 K
F Finish
2 Bright chrome
5 Black powder coated
4 (.16)
27 (1.06)
45
(1.77)
23 (.91)
Frame
Door
Grip
Ø 25
(.98)
112.5 (4.42)
36 (1.42)
Ø 28
(1.10)
17.9
(.7)
0.5 (.02) Sealing washer
(compressed)
Screw M6 thread
ACTUAL SIZE
Non-locking Key-locking
Key code R001
Key-locking
(order lock core
separately)
Key-locking
Key code CH751
K Key options
0 No keys supplied
(order separately, see page 130)
3 1 Overmolded key supplied
L Lock Style
If grip falls between two choices, use the smaller option
Latch Part Number
(no cam)
125
Dimensions in millimeters (inch) unless otherwise stated
Cam Part Number Table (order separately from latch)
Grip Part Number Grip Part Number Grip Part Number Grip Part Number
4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018
6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019
8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020
10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021
12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022
E5 - 9 - L F - UU1 - 1 K
E5 Cam Latch
Zinc · T-handle · Hand operated · Fixed grip
• Single hole install
• Multiple key codes
Material and Finish
Zinc alloy, powder coated or chrome
plated and steel, zinc plated
Performance Details
Maximum static load: 330 N (74 lbf)
Sealing Notes
NEMA 4 / IP65 achieved using
gasket supplied
Installation Notes
Mounting nut:
Maximum tightening torque:
10 Nm (88 inlbf)
Screw:
Maximum tightening torque:
10 Nm (90 inlbf)
Keys
See page 130
Notes
Suitable for push-to-close action
see page 128
For adjustable grip versions see
page 134
For lock core selection and a
complete overview of the SOUTHCO®
Key-Choice System see page 158
Part Number Selection
Order latch and cam separately
6 (.24) Max.
1 (.04) Min.
36±4
(1.42±.15)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
L Lock style
60 Non-locking (omit last two digits of part number)
61 Keyed CH751 (lock core finish matches handle finish)
62 Keyed R001 (stainless steel scalp shuttered)
63 Without lock core (omit last two digits of part number)
Order lock core separately, see page 158
F Finish
2 Bright chrome
5 Black powder coated
4 (.16)
27 (1.06)
45
(1.77)
23 (.91)
Frame
Door
Grip
22
(.88)
32 (1.25)
82.5 (3.25)
Ø 28
(1.10)
0.5 (.02) Sealing washer
(compressed)
Screw M6 thread
www.southco.com/E5
Non-locking Key-locking
key code R001
with shutter
Key-locking
(order lock core
separately)
Key-locking
key code CH751
K Key options
0 No keys supplied (order separately, see page 130)
3 1 Overmolded key supplied
L Lock Style
If grip falls between two choices, use the smaller option
Latch Part Number
(no cam)
126
ACTUAL SIZE
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
• Single hole install
• Multiple key codes
Material and Finish
Wing: Zinc alloy, black powder
coated and steel, zinc plated
Padlockable wing: Zinc alloy, chrome
plated and steel, zinc plated
Performance Details
Maximum static load: 330 N (74 lbf)
Sealing Notes
Wing style sealed to meet NEMA 4 /
IP65 standards
Installation Notes
Mounting nut maximum tightening
torque: 10 Nm (88 inlbf)
Screw Maximum tightening torque:
5 Nm (45 inlbf)
Keys
See page 130
Notes
Wing style suitable for push-to-
close action see page 128
For lock core selection and a
complete overview of the SOUTHCO®
Key-Choice System see page 158
Part Number Selection
Order latch and cam separately
Cam part number see table page
127
E5 Cam Latch
Zinc · Wing style · Padlockable wing style · Fixed grip
L Lock style
30 Non-locking (omit last two digits of part number)
31 Key-locking black lock core keyed alike CH751
32 Key-locking stainless steel scalp and shuttered lock core keyed alike R001
33 Without lock core (omit last two digits of part number)
Order lock core separately, see page 158
E5 - 9 - L 5 - UU1 - 1 K
4 (.16)
27
(1.06)
45 (1.77)
23 (.91)
Frame
Door
Grip
19
(.75)
Ø 28
(1.10)
0.5 (.02)
Sealing washer (compressed)
56 (2.00)
21
(.83)
Screw M6 thread
R Rotation
1 Type B counter-clockwise to latch
2 Type A clockwise to latch E5 - 31 - 5 R 2 - UU0
4 (.16)
27.5
(1.08)
45 (1.77)
23 (.91)
Frame
19
(.75)
Ø 28
(1.10)
16.5
(.66)
Grip
0.5 (.02) Sealing washer
Padlock
thru hole
Ø 8 (.31)
Screw M6 thread
50
(1.97)
Door
Padlockable Wing
www.southco.com/E5
Non-locking Key-locking
key code R001
with shutter
Key-locking
lock core
(order separately)
Key-locking
key code CH751
L Lock Styles
K Key options
0 No keys supplied
(order separately, see page 130)
3 1 Overmolded key supplied
Wing
Latch Part Number (no cam)
Latch Part Number
(no cam)
Part Number Selection _______________________________________________________________________________
See table
Order latch and cam separately
Cam part number see table page
127
127
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
E5 Cam Latch
Zinc · Cylinder lock · Fixed grip
• Single hole install
• Latched / unlatched
indicator
Material and Finish
Zinc alloy, powder coated and steel,
zinc plated
Scalp stainless steel
Performance Details
Maximum static load: 330 N (74 lbf)
Installation Notes
Mounting nut maximum tightening
torque: 10 Nm (88 inlbf)
Screw Maximum tightening torque:
5 Nm (45 inlbf)
Sealing Notes
NEMA 4 / IP65 achieved using
gasket supplied
Keys and Accessories
See page 130
Notes
Suitable for push-to-close action
see page 128
Cam
19 (.75)
Ø 28 (1.10)
Grip
23
(.91)
45 (1.77)
4 (.16)
27.2
(1.07)
5 (.20) 0.5 (.02) Sealing washer (compressed)
Mounting
nut
Screw M6 thread
Frame
Door
E5 - 5 - 40 F - UU1 - 1 K
F Finish
2 Bright chrome
5 Black powder coated
6 (.24) Max.
1 (.04) Min.
36±4
(1.42±.15)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
-0
+.004
-.000
+0.5
-0
+.02
-.00
Cylinder Lock
www.southco.com/E5
Cam Part Number Table (order separately from latch)
Grip Part Number Grip Part Number Grip Part Number Grip Part Number
4 (.16) E5-6003 14 (.55) E5-6008 24 (.94) E5-6013 34 (1.34) E5-6018
6 (.24) E5-6004 16 (.63) E5-6009 26 (1.02) E5-6014 36 (1.42) E5-6019
8 (.31) E5-6005 18 (.71) E5-6010 28 (1.10) E5-6015 38 (1.50) E5-6020
10 (.39) E5-6006 20 (.79) E5-6011 30 (1.18) E5-6016 40 (1.57) E5-6021
12 (.47) E5-6007 22 (.87) E5-6012 32 (1.25) E5-6017 42 (1.65) E5-6022
K Key options CH751
0 No keys supplied (order separately, see page 130)
2 2 Flat keys supplied
If grip falls between two choices, use the smaller option
Latch Part Number
(no cam)
___________________________________________________________________________ Part Number Selection
See table
Order latch and cam separately
128
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
E5 Cam Latch
Zinc · Push-to-close · Hand, key or tool operated · Single and two point
www.southco.com/E5
• Single hole installation
• Latched / unlatched
indicator
• Push-to-close action
Material and Finish
Zinc alloy, powder coated and steel,
zinc plated
Performance Details
Maximum static load: 330 N (74 lbf)
Installation Notes
Mounting nut maximum tightening
torque: 10 Nm (88 inlbf)
Screw Maximum tightening torque:
5 Nm (45 inlbf) for two point
actuator only
Keys and Accessories
See page 130
Notes
Single Point: Push-to-close action
in unlocked position only and key
inserted (cylinder lock)
Two Point: Order actuator separately
(see page 131)
For lock core selection and a
complete overview of the SOUTHCO®
Key-Choice System see page 158
Actuator Part Number
See page 131 for details
Two point to be used with
SOUTHCO® R4 rotary series latches
and cables see page 272
Two point push to close action:
Internal spring causes return of
driver and actuator to original
latched position when driver is
released after opening. Ideal for
use with cables and rotary latches.
6 (.24) Max
1 (.04) Min
26±1.5 (.94±.06)
(For single point only)
Frame
Ø 22.5 (.89 )
Door
20.1
(.79 )
+0.1
0
+.004
-.000
+0.5
0
+.02
-.00
18 (.70)
Ø 28 (1.10)
Grip
33 (1.30)
8.3 (.32)
31
(1.22)
5 (.20)
0.5 (.02) Sealing washer
(compressed)
Mounting
nut
21 (.83)
Frame
Door
A
Rotation
identification
Screw M6 thread
Type
“A”
Type
“B”
Cam rotates clockwise
to latch
Cam rotates counter-clockwise
to latch
Ø 28 (1.10)
24.9
(.98)
Mounting nut
Door
Cable actuator (see notes)
3.5
(.14)
0.5 (.02)
Sealing washer
(compressed)
55.4 (2.20)
21
(.83)
Two point
actuator
(order separately)
Screw M6 thread
Single Point Spring-Loaded (Type A tool operated shown)
Two Point Spring-Loaded (Type A hand operated shown)
Two Point Actuator for bare cable
(order separately, see page 132)
1. Push door towards frame
3. Cam springs back and moves
behind frame to achieve latching
2. Ramp-shaped cam rotates
as it contacts frame
Operation
21 (.83)
24 (.79)
20 (.79)
55.4 (2.20)
.5 (.02)
Sealing Washer
(compressed)
Cable Bracket
Mounting Nut
Two Point Actuator
(order separately)
AC Cable assembly,
jacketed (see Notes)
R Rotation
129
Dimensions in millimeters (inch) unless otherwise stated
H Head style
00 Slotted
01 8 (.32) Hex recess
02 7 (.28) Triangle
03 8 (.32) Triangle
04 7 (.28) Square
05 8 (.32) Square
06 3 (.11) Double bit
07 5 (.19) Double bit
08 8 (.32) Square recess
13 Bellcore 216
19 Bellcore electronics
21 Recessed slot
(tamper resistant)
22 Railway standard
Slotted 8 (.32)
Hex recess
7 (.28)
Triangle
8 (.32)
Triangle
7 (.28)
Square
8 (.32)
Square
3 (.11)
Double bit
5 (.19)
Double bit
8 (.32)
Square
recess
Bellcore
216
Bellcore
electronics
Recessed slot
(tamper
resistant)
Railway
standard
E5 - 6 - H F - R 0
F Finish
2 Bright chrome
5 Black powder coated
R Rotation
51 Type A single point
(for visual identification, cam stamped A or B)
52 Type B single point
(for visual identification, cam stamped A or B)
TR Type A two point (order actuator separately)
TL Type B two point (order actuator separately)
E5 - T - L F - R 0 - 1 K
F Finish
2 Bright chrome (not available for wing type)
5 Black powder coated
R Rotation
51 Type A single point (for visual identification cam stamped A or B)
52 Type B single point (for visual identification cam stamped A or B)
TR Type A two point (order actuator separately)
TL Type B two point (order actuator separately)
Part Number Selection
Latch supplied fully assembled
Hand / Key Operated
Tool Operated
Part Number Selection
Latch supplied fully assembled
H Head Styles
K Key options
0 No keys supplied
(order separately, see page 130)
3 1 Overmolded key supplied
L
Lock style
T = 5 T = 9
Cylinder Lock Wing T-handle L-handle
Non-locking (omit last two digits of part number) ~30 60 70
Keyed CH751 (lock core finish matches handle finish) ~31 61 71
Keyed CH751 (stainless steel scalp shuttered) 40 ~ ~ ~
Keyed R001 reversible (stainless steel scalp shuttered) ~32 62 72
Without lock core (omit last two digits of part number) (to be
ordered separately see page 158) ~33 63 73
T Type
5 Cylinder lock keyed alike CH751
9 Wing / T-handle / L-handle
130
Dimensions in millimeters (inch) unless otherwise stated
E5 Cam Latch Accessories
Keys
Part Number
Overmolded key CH751:
Single: PK-10-10-05
Pair: PK-10-01-05
Overmolded key R001:
Single: PK-10-10-05-KR001
Pair: PK-10-01-05-KR001
Flat key
Pair: PK-10-01
Material and Finish
Tool key: Zinc alloy or nylon
Overmolded key: Nickel plated and
ABS plastic black
Flat key: Nickel plated
Keys Zinc or Nylon
Overmolded Keys
Key CH751
Flat Keys
Key CH751
E3 - H - F
H Head style
2 3 (.11) Double bit
3 7 (.28) Triangle
4 7 (.28) Square
7 8 (.32) Triangle
8 8 (.32) Square recess
9 5 (.19) Double bit
(nylon only)
10 8 (.32) Square male
(zinc only)
11 Bellcore electronics
12 Bellcore 216
(zinc only)
2 3 (.11) Double bit
3 7 (.28) Triangle
4 7 (.28) Square
7 8 (.32) Triangle
8 8 (.32) Square recess
9 5 (.19) Double bit
10 8 (.32) Square male
11 Bellcore electronics
12 Bellcore 216
F Finish
1 Plated zinc
2 Natural zinc
3 Nylon, black
56
(2.2)
55
(2.2)
Head Styles
www.southco.com/E5
Key R001
131
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/E5
Ø 6.1 (.24)
6 (.23)
51 (2.0)
18 (.7)
15.2
(.59)
3.5 (.14)
59 (2.32)
23 (.9)
17 (.66)
17.2 (.67)
Ø 6.2 (.24)
23 (.9)
2.4 (.09)
E5 Cam Latch Accessories
Multi-point actuators · Dummy cam
Material and Finish
Zinc alloy
Notes
Actuator plate (for multi-point see
page 272 for cable assembly)
(not recommended for key-locking)
Not to be used with low profile E5
Material and Finish
Steel, plated
Notes
Actuator plate (for multi-point see
pages 198-199 for rods)
For use with all E5 latches
Material and Finish
Steel, stainless steel
Notes
Replaces cam when used with
actuator plate A5-90-101-11 in order
to create a 2-point latching system
93.6 (3.68)
22.2
(.87)
4.6 (.18)
8.1
(.31)
Actuator plate
Adaptor
Ø 8.6 (.33)
x 18 (.7) deep
18
(.7)
28.8
(1.13)
Multi-Point Actuator
Multi-Point Actuator - Low Profile
Multi-Point Actuator
Dummy Cam
Material and Finish
Zinc alloy and steel, zinc plated
Notes
Actuator plate (for multi-point see
page 198 for rods)
Not to be used with low profile E5
Part Number
A5-91-201-11
Part Number
A8-4-01-03
Part Number
A5-90-101-11
Part Number
Steel H3-0-45688
Stainless Steel H3-0-45688-24
20°
3.8 (.15)
8.5 (.33)
2X 8.1 (.32) Ø 17 (.67)
4 (.16)
132
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/E5
E5 Cam Latch Accessories
Hooked cam · Multi-point actuator · Cable brackets
51 (2.0)
36 (1.42)
18 (.71)
7.5
(.3)
2X 8.1
22 (.87)
18.1 (.71)
9 (.35)
Ø 3
3.1 (.12)
6 (.24)
Multi-Point Actuator
Cable Bracket – Counter Clockwise Rotation
Cable Bracket – Clockwise Rotation
Part Number
A5-99-136
Part Number
AC-0-49617-11-L
Part Number
AC-0-49617-11-R
52
(2.05)
38 (1.5)
Ø 22.5
(.88)
55 (2.17) 2 (.08)
2X R20
2X 20.1 (.79)
2X 16
(.63)
32.4
(1.28)
2X 25
2X 43
4X Ø 6.4
(.25)
2X 17
(.67)
38 (1.5)
2X 52
55 (2.17)
2 (.08) 2X R20
20.1
(.79)
2X 25
2X 43 2X 17
32.4
(1.28)
2X 16
(.63)
Ø 22.5
(.88) 4X Ø 6.4
(.25)
Hooked Cam Part Number
E5-6200 No stop
E5-6210 Stop for clockwise rotation
E5-6220 Stop for counter-clockwise rotation
10
(.39)
4
(.16)
36
(.42)
R4
8.1 (.32)
Ø 9.95
(.39)
R28
18
(.71)
18 (.71)
Hooked Cam
Material and Finish
Steel plated
Hook cam: Steel, plated
Multi-point actuator: Zinc alloy,
plated
Cable bracket: Steel, plated
Notes
Not to be used with low profile E5
Part Number
See table
Notes
See page 272 for additional cable
assembly selections
133
Dimensions in millimeters (inch) unless otherwise stated
E5 Cam Latch Accessories
Sealing cover · Sealing washer · Pull tab · Padlock bracket
Material and Finish
Sealing washer: Neoprene natural
Sealing cover: Thermoplastic
elastomer, black
Installation Notes
To provide sealing: use two sealing
washers and add compressed
thickness of each washer and
accessory thickness to your door
thickness range.
Notes
Sealing washer for use with all E5
products
Sealing cover for use with tool
operated and cylinder lock E5 only
Part Number
See table
Part Number
See table
www.southco.com/E5
Material and Finish
Padlock bracket: Stainless steel,
black powder coated
Pull tab: Nylon, black
Installation Notes
To provide sealing: use two sealing
washers and add compressed
thickness of each washer and
accessory thickness to your door
thickness range.
Notes
Padlock brackets and pull tabs for
use with tool operated and cylinder
lock E5 only
47 (1.84)
28 (1.09)
11.7 (.46)
35 (1.38)
Sealing Cover
Ø 28.7
(1.13)
6.9 (.27)
19.6
(.77)
Ø 22.5
(.875)
Ø 22.2 (.88)
20
(.79)
45
(1.78)
32
(1.25)
20
(.79)
29
(1.16)
2.4
(.093)
16
(.63)
Pull Tab
Shown perpendicular
to latch cam
Shown in-line
with latch cam
Padlock Bracket (Square)
Ø 22
(.87)
Ø 11
(.43)
42 (1.65)
33 (1.30) 2
(.08)
24.5
(.96)
Ø 22.5
(.88)
Ø 11 (.43)
2
(.08)
Ø 34 (1.34)
25 (.98)
Padlock Bracket (Round)
Type Part Number Grip Adjustment Formula
Padlock bracket square E3-77-101-31 Add 2 (.08) to door thickness
Padlock bracket round E3-77-102-31 Add 2 (.08) to door thickness
Pull tab E5-18 Add 2.4 (.093) to door thickness
Ø 19 (.75)
0.8 (.031)
13.5 (.53)
Ø 16 (.63)
Ø 28.2 (1.11)
Ø 22.6 (.89)
0.8 (.031)
Sealing Washer Door
Sealing washer
Accessory
Sealing washer
Type Part Number Grip Adjustment Formula
Sealing washer E5-17 Add 0.4 (0.02) compressed height to door thickness
Sealing cover 90-3 Add 2.3 (.090) to door thickness