Amphenol Miniature Cylindrical
Connectors
12-070-15
Meets MIL-C-26482, Series 1
Specifications
®
Amphenol Corporation
Amphenol Industrial Operations
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-industrial.com Amphenol
Table of Contents Page No.
Introduction, Amphenol® Miniature Cylindrical
General Information, Design Flexibility . . . . . . . . . . . . . . . . . . .1, 2
Con necto r Selectio n G u id e . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inse r t avai la bili ty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Insert availability Breakaway Twist Pull. . . . . . . . . . . . . . . . . . . . . . . 6
Alte r n a te pos i ti o n i n g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 Bayonet Coupling,
Solder Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 12, 13
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 14
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15
PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 16
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 17
PT07 (MS3114) SP07 jam nut receptacle. . . . . . . . . . . . . . . . . . 18
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19
PT Connectors with Printed Circuit Board Contacts -
box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20
PTB, SPB thru bulkhead receptacle. . . . . . . . . . . . . . . . . . . . . 21
General Information, Specifications - PT hermetic . . . . . . . . . . . . . 22
PTIH (MS3113H) herm etic solder mounting receptac le. . . . . . . . . . . 23
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 25
PT Br e a k a w a y twis t p u l l pl u g . . . . . . . . . . . . . . . . . . . . . . . . 26
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . 27
PT-SE, SP- SE, MS/PT-SE Prop rietary /M IL-C -26482, Serie s 1 Bayonet Coupling,
Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 28, 29
PT00SE (M S3120), SP00S E wall mounting receptacle. . . . . . . . . . . 30
MF00SE (M S3128) wall mounting receptacle. . . . . . . . . . . . . . . . 31
PT01SE (M S3121) SP 01SE cable connecting rece ptacle . . . . . . . . . 32
PT02SE (M S3122) SP 02SE box mounting receptacle . . . . . . . . . . . 33
MF02SE (M S3127) box mounting receptacle . . . . . . . . . . . . . . . . 34
PT06SE (M S3126), SP06S E straight plug . . . . . . . . . . . . . . . . . 35
PT07SE (M S3124) SP 07SE jam nut receptacle . . . . . . . . . . . . . . 36
PT08SE, S P0 8 SE 90 d e g re e plu g . . . . . . . . . . . . . . . . . . . . . 37
PT- S E Brea kw a y twis t p u l l plug . . . . . . . . . . . . . . . . . . . . . . . 38
PT- S E, SP-SE, MS/PT-SE h o w to o r d er . . . . . . . . . . . . . . . . . . 39
PT-CE, SP- CE Bayonet Coupling, Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 40, 41
PT00CE, SP00CE wall mounting receptacle . . . . . . . . . . . . . . . . 42
PT01CE, cable connecting receptacle . . . . . . . . . . . . . . . . . . . 43
PT02CE, SP02CE box mounting receptacle . . . . . . . . . . . . . . . . 44
PT06CE, SP06 C E strai g h t plug . . . . . . . . . . . . . . . . . . . . . . . 45
PT07CE, SP07 C E jam nut rece p ta cle. . . . . . . . . . . . . . . . . . . . 46
PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 47
PT- CE Breakawa t twis t p u l l p l u g . . . . . . . . . . . . . . . . . . . . . . 48
PT- C E, SP-C E how to ord er. . . . . . . . . . . . . . . . . . . . . . . . . 49
PC Threaded Coupling, Solder Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 50, 51
PC00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 52
PC01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 53
PC02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 54
PC0 6 s tr aight plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PC0 7 ja m nut r e ce p tacle . . . . . . . . . . . . . . . . . . . . . . . . . . 56
General Information, Specifications - PC hermetic . . . . . . . . . . . . . 57
PCIH h e r metic so l d e r mo unti n g r e ce p tacle . . . . . . . . . . . . . . . . . 58
PC02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 59
PC0 7 H herm e t i c ja m nut r e ce p tacl e. . . . . . . . . . . . . . . . . . . . . 60
PC ho w to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PC-SE, PC-CE Threaded Coupling, Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . . . 62
PC-SE, PC-CE how to order . . . . . . . . . . . . . . . . . . . . . . . . 63
Acce ssor i e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-6 8
App l icati o n to o l s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Contacts, Power and Thermocouple Crimp. . . . . . . . . . . . . . . . . . . . 70
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-76
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . 78, 79
Amphenol Sales Office and Authorized Distributor Listing . . . . . . . . . . . . 80
Proprietary/MIL-C-26482 Series 1 connectors
covered in th is c atalo g are wid ely use d in ge n-
eral duty and environmental applications,
both industrial and military.
Markets tha t us e this fa mi ly of c on nec tors i ncl ud e:
Instrumentation
Monitori ng Equi pm ent
Machine Tool, Factory Automation
Communications
Geophysical
Industrial Controls and Robotics
Oil and Petrochemical Industries
Rail/M as s Transit
Military/Aerospace
If more information is n eeded concerning the con-
nectors covered in this publication, or if there are
special application needs, please contact:
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telepho ne: 607 -563-5011
Fax: 607-563 -53 51
Please go to the Amphenol websites to view,
download and save this catalog and most all of
Amphenol interconnection product literature.
www.amphenol-industrial.com
www.amphenol-aerospace.com
Some miniature connector styles
are available in RoHS Compliant
versions. Please contact Amphenol
Industrial Operations for more
information.
Amphenol operates Quality Systems that are cer-
tified to ISO9001: 2000 by third party registrars.
NOTE:
The connector products in this brochure were formerly
known as Bendix® products. These products are now
manufactured and sold under the Amphenol® brand
name. The name “Amphenol” will replace the name
“Bendix” on products and literature in the future.
NOTE:
The Miniature MIL-C-26482, Series 2 connectors PT S -
DR and MS/PTS-DR (formerly in this catalog) are no
longer supplied with these designations. Amphenol now
supplies the Amphenol®/Matrix® MIL-C-26482, Series
2. (Military numbers include MS3470 - MS3472,
MS3474, - MS3476).
Please refer to page 78 for a brief description of the
Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet
coupling connectors with crimp, rear insertable and rear
releasable contacts, and ask for catalog 12-071 for
detailed information on this series.
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
1
Amphenol Miniature Cylindrical Connectors
Proprietary/MIL-C-26482, Series 1
®
Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These
miniatu re c on nec tors , a re av ai la ble in severa l s eri es, eac h wi th v ary in g de sign charac teri sti cs an d c us tom er o ptio ns to m ee t c ost co n-
siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MIL-
C-26482, Series 1, and in addition there are several proprietary styles.
Common features of all styles:
All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an
indefinite shelf life.
All have resilient inserts which provide high dielectric strength and moisture barrier.
A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.
Options
7 shell styles with 60 insert patterns
Hermetic seal (glass fusion) recepta-
cle styles available
P re ssurized thr u bulkhead recepta-
cle style a vai l able
B re akaway quick disconn e c t styl es
EMI filter protection styles
P re -installed coax solder contacts
are availa bl e
P rinted circuit boar d contacts ar e
available
Bayonet Coupling with Solder Contact Termination
PT, MS/PT (solder)
MS and propri etary versions
Factory installed solder contacts
3 poi nt bayonet coupling and 5 key/keyw ay mating.
Int ermateable w i t h all mi niature series con necto r s except thre aded
PC series.
MS/PT meets MIL-C-26482 Series 1, service classes E, F and P.
MS/PT is UL recognized.
SP (solder)
SP Series is a modification of the PT with same features except a
wider flan ge f or bac k panel moun ting
Bayonet Coupling with Crimp Contact Termination
PT-SE, MS/PT-SE (crimp)
MS and propri etary versions
Crimp rear insertable/front release contact termination. (closed entry
socket insert prevent s probe dam age).
3 poi nt bayonet coupling and 5 key/keyw ay mating.
Int ermateable w i t h all mi niature series con necto r s except thre aded
PC series.
MS/PT-SE meets MIL-C-26482 Series 1, service classes E, F, P.
SP-SE (crimp)
M odi f icat i on of t he PT-SE with wi de r f lange for back pa nel mounting
PT-CE, SP-CE (crimp)
In cor porates a sp ecial one-pi ec e i nsert and gro m m et assembly
Threaded Coupling with Solder Contact Termination
PC (solder) Proprietary
D ouble stub thr eaded coupl in g and single hol e polarizat ion.
Factory installed solder contacts
Threaded Coupling with Crimp Contact Termination
Two thread ed PC styles are offered in som e shell sizes. Bo th hav e
crimp front re le ase and fron t rem ovable contacts, but th ey have differ-
ent retent ion systems .
PC-SE (crimp) Propri et ar y - with spring tower retent ion syste m
S pr in g to wer retention system
PC-CE (cri m p ) Proprietary - wi t h nylon wafer di el ectric system
Options
6 shell styles with 47 insert patterns
B re akaway quick disconn e c t styl e
available
Coax and thermocouple contacts are
available
Options
5 shell styles with 60 insert patterns
Hermetic receptacles available
Pressurized thru bulkhead recepta-
cle style available
Pre-installed coax solder contacts
are av aila ble.
Options
5 shell style s (c on sul t A m phenol for
availabi lit y of shell sizes and insert
patterns)
PT Sold er
jam nut receptacle and
mated straight plug
PT-SE C rimp
wall moun t receptacle
and mated straight plug
PT Sold er
wall mount receptacle
PC Threaded Crimp
straight plug and wall
mount receptacle
2
Amphenol Miniature Cylindrical
design flexibility
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or
threaded shells, solder or crimp termination within the style variations, there are
additional options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression glass sealed
inserts which provide envionrmental moisture sealing. There are three
hermetic styles within the PT bayonet series and three hermetic styles
within the PC threaded series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded coax
contacts. Size 8 and 12 crimp coax contacts are available in PT-SE,
SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax
contacts are available in PT, SP,MS/PT connectors. See coax contact
information pages at the end of this catalog.
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail-
able with printed circuit board contacts. Standard PCB tails for MIL-C-26482 connectors
have g old p lat ing , .0050 i nc hes o ve r n ick el . Se e pag e 20 and c al l Am ph eno l for further inf or-
mation.
Flex Circuitr y
Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are
available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be
used w ith min iature 264 82 conne ctors an d it c an be desig ned to meet sp ecific leng th, cu rrent
carrying capacity and to fit the precise geometric shape of the connector to board package.
Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which
eliminates the need for an additional interconnect to the PCB.
Breakaway, Twist Pull Miniatures
Quick disconnect “breakaway” styles are shown in this catalogs. These are available in PT
solder style plugs (page 26), PT-SE crimp style plugs (page 38) or PT-CE crimp style plugs
(page 48). Quick disconnect of the connector plug from the receptacle is accomplished with
axial pull on the lanyard. This instant decoupling and damage free separation is ideal for
weapons release and blind or difficult accessibility situations. Separation forces vary per
connector series. The plug and receptacle need to be fully mated before disengagement by
the lanyard pull.
Filter Protec t io n
Amphenol offers the FPT Series which combines the miniature PT
series with an EMI filter. Designe d to provide EMI prot ection for
sensitive circuits, each circuit is individually filtered within the con-
nector, eliminating the need for costly and bulky exterior network
filters. Filter contacts are available in MF, HF, VHF, and UHF
ranges and are intermateable and intermountable with MIL-C-
26482 connectors. For further information see catalog 12-120,
Amphenol EMI Filter Transient Protection Connectors. (online at
www.amphenol-aerospace.com).
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application. A variety
of materials are available: neoprene, hypalon and others; and a variety of lengths can be
designed to meet customer specifications. Overmold seals to the rear of the connector and
to the cable jacket providing moisture sealing.
®
26482 Connector with PC Tail
Contacts
Breakaway Twist Pull 26482
26482 Connector with Flex
26482 Connector with Hermetic
Seal Insert and Coax Contacts
26482 Connector with EMI
Filter Protection 26482 Connect or with Overmol de d
Cable
3
The accompanying chart is provided to assist the user in selecting
the appropriate type of miniature connector to meet the application
requirements. Further information can be found in specific sections
of this catalog.
RI/FR = Rear Insertion/Front Releasable
o intermates with o
X intermates with X
†† Optional finishes available. See “how to order” sections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is som etimes referred to as a cable connecting “plug.
It does, however, mate with either a straight or 90 degree plug.
Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet coupling connectors with rear insertable and rear releaseable
contacts are covered in another catalog - See pageXX for a brief description and see complete details in catalog 12-071
which is online at www.amphenol-aerospace.com.
CHARACTERISTICS
Solder Crimp
PT MS/PT SP PC MS/
PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE
Intermateable† o o o X o o o X o o X
Contacts Solder ••••
Crimp RI/FR ••••••
Contact Ret ention
System Non-Removable ••••
Removable ••••••
Coupling Bayonet •••
Threaded ••
Standard Fi nis hes†† Olive Drab Cadmium (00 3) ••
Anodic Coated (005) ••
Bright Cadmium (001 ) ••
Temperature Rang e Resilient Dielectric (–55°C to +125°C) ••••••
Wide Mounti ng Flange ••
Hermetic Seal ••••
SHELL STYLE AVAILABILITY
Wall Mounting Rec eptacle “00” **••••
Cable Connect i ng Receptacle “01” * ** •• ••
Box Mounting Receptacle “02” * ***••••
Straigh t Plug “06” ••••••
Jam Nut Receptacle “07” ***••••••
Thru-bulkhead Receptacle “TB” ••
Solder Mount Receptacle “I” *• *• *•
90° Plug “08” •••••
Amphenol Miniature Cylindrical
connector selection guide
®
4
Insert
Arrangement
Solder Termination Crimp Termination
Total
Contacts
Contact Size
MS/PT PT SP PC
Hermetic
PT
MS-PT
PC
MS/PT-SE
PT-SE
SP-SE
PC-SE
PT-CE
SP-CE
PC-CE 201612
Coax
Service
Rating12 8
6-1 XXX X* 11 I
8-2 X XXX X X 22 I
8-3 X XXX X X 33 I
8-4 X XXX X X 44 I
8-33 XXX X X 33 I
8-98 XXX 33 I
10-2 X X X 2 2 I
10-5 X X X X* 5 5 I
10-6 X X X X X X X 6 6 I
10-70 X X X 1 1 Coax
10-98 X X X X X* X 6 6 I
12-3 X X X X X X X 3 3 II
12-4 X X X X* 4 4 I
12-8 X X X X X* X X 8 8 I
12-10 X X X X X X X 10 10 I
12-14 X X X 14 14 I
12-98 X X X 10 10 I
14-2 X X X 2 2 II
14-4 S S S X 4 4 I
14-5 X X X X X X X 5 5 II
14-8 X X X 8 6 2 I
14-12 X X X X X X X 12 8 4 I
14-15 X X X X X X X 15 14 1 I
14-18 X X X X X* X X 18 18 I
14-19 X X X X X X X 19 19 I
14-22 X* 5 1 4 I
14-71 P X X (02CE) 4 3 1 I
14-91 HV S X X X* 3 3 **
14-AA X X X X 4 4 I
16-8 X X X X X X X 8 8 II
16-23 X X X X X X 23 22 1 I
16-26 X X X X X X X 26 26 I
16-70 X X X 15 14 1 N/A
16-76††† X* 14 8 1 5 ***
16-99 X X X X X 23 21 2 I
18-5 X X X X* 5 5 II
18-8 88 I
18-11 X X X X X X X 11 11 II
18-30 X X X X X* X X 30 29 1 I
Amphenol Miniature Cylindrical
insert availability
®
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***15 00 VAC (R MS)
Sdesignates Socket insert only.
P designates Pin insert only.
†Size 12 contacts for #10 wire
††Not pre sen tly tooled
†††Contacts must be ordered separately
5
Insert
Arrangement
Solder Termination Crimp Termination
Total
Contacts
Contact Size
MS/PT PT SP PC
Hermetic
PT
MS-PT
PC
MS/PT-SE
PT-SE
SP-SE
PC-SE
PT-CE
SP-CE
PC-CE 201612
Coax
Service
Rating12 8
18-32 X X X X X X X 32 32 I
18-7 1 X* 9 8 1 Coa x, II
18-72 X X X 14 10 4 N/A
18-75 XXX 4 4 Coax
18-76 431II
18-80 XXX X 86 2Coax, I
18-9 1 H V X* X 6 6 **
20-16 X X X X X X X 16 16 II
20-24 XXXX X 2424 I
20-25 X X X 25 25 I
20-26 X X X 26 20 6 I
20-27 XXXX X 2727 I
20-39 X X X X X X X 39 37 2 I
20-41 X X X X X X X 41 41 I
20-70 14 10 4 Coax
20-90 HV X X X 7 7 Hi-Voltage
22-7 XXX X* 7 7Coax
22-21 X X X X X X X 21 21 II
22-25 X* 25 25 I
22-32 X X X X X P 32 32 I
22-34 XXX X 3434 I
22-36 XXX X 3636 I
22-41 X X X X X X X 41 27 14 I
22-55 X X X X X X X 55 55 I
22-70 X X X 19 13 6 I, Coax
22-71 9 2 7 I, Coax
22-72 X X X 19 12 4 3 N/A
22-78††† X* 7 7 Coax
22-96 X* 7 7† II
24-31 XXX X 31 31 I
24-51 X* 51 47 4 I
24-61 X X X X X X X 61 61 I
24-71 X X X 49 45 2 2 N/A
24-79 6 1 5 Coax
Amphenol Miniature Cylindrical
insert availability, cont.
®
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***1500 VAC (RMS)
†Size 12 contacts for #10 wire
††Not pre sen tly tooled
†††Contacts must be ordered separately
INSERT AVAILABILITY
6
Insert Availability - Breakway Twist Pull
Insert
Arrangement
Crimp
Termination Solder
Termination Total
Contacts
Contact Size
PT-CE PT-SE PT 20 16 12 Service
Rating
8-2 X X 2 2 I
8-3 X X 3 3 I
8-4 X X 4 4 I
10-2 X 2 2 I
10-6 X X X 6 6 I
10-98 X X 6 6 I
10-99 X X 7 7 I
12-3 X X X 3 3 II
12-4 X 4 4 I
12-8 X X X 8 8 I
12-10 X X X 10 10 I
12-98 X 10 10 I
14-2 X 2 2 II
14-5 X X X 5 5 II
14-8 X 8 6 2 I
14-12 X X X 12 8 4 I
14-15 X X X 15 14 1 I
14-16 X 4 2 2 II
14-18 X X X 18 18 I
14-19 X X X 19 19 I
14-91 X X 3 3* H.V.
16-6 X 6 6 I
16-8 X X X 8 8 II
16-23 X X X 23 22 1 I
16-26 X X X 26 26 I
16-99 X X 23 21 2 I
18-5 X X 5 5 II
18-11 X X X 11 11 II
18-28 X X 28 26 2 I
18-30 X X X 30 29 1 I
18-32 X X X 32 32 I
18-91 X X 6 6* H.V.
20-8 X 8 8 I
20-16 X X X 16 16 II
20-24 X X 24 24 I
20-25 X 25 25 I
20-27 X X 27 27 I
20-39 X X X 39 37 2 I
20-41 X X X 41 41 I
22-8 X 8 8 II
22-21 X X X 21 21 II
22-25 X 25 25 I
22-32 X X X 32 32 I
22-34 X X 34 34 I
22-36 X X 36 36 I
22-41 X X 41 27 14 I
22-55 X X X 55 55 I
22-96 X 7 7† II
22-97 X 16 16 II
22-99 X 11 11 II
24-31 X 31 31 I
24-61 X X X 61 61 I
Amphenol Miniature Breakaway Twist Pull
insert availability
®
* 5KV Voltage Rating
Size 12 contact for #10 wire.
For further information regarding any additional
insert patterns available in Breakaway Miniature
connec tors, please con tact Amphenol Aerospace.
For availability of shielded coax contacts within
Breakaway Miniature connectors contact Amphe-
nol.The Breakaway style pages are: PT (solder)
breakaw ay pl ug i s on pag e 26 , the PT-SE (crimp)
breakaway plug is on page 38, and the PT-CE
(crimp) breakaway plug is on page 48.
7
Amphenol Miniature Cylindrical
alternate positioning
Alternate Positioning
To avoid cross-plugging problems in applications requiring
the use of more than one miniature cylindrical connector of
the same size and arrangement, alternate insert rotations
are available as indicated in the accompanying chart.
As shown in the diagram at right, the front face of the pin
insert is rotated within th e shell in a clo ckwise dir ection from
the normal shell key. The socket insert would be rotated
counterc lockwis e the same numb er of degrees in respect to
the normal shell key.
Position W Position X Position Y Position Z
Views looking into front face of pin insert or rear of socket insert.
AB
AB
AB
AB
Insert Rotation
Shell
Size Insert
Arrangement
Degrees
WXYZ
6 6-1 ––––
8 8-2* 58 122
8 8-3 60 210
88-4*4597184
8 8-33* 90
8 8-98 ––––
10 10-2 45 90 315
10 10-5* 45 151 180 270
10 10-6* 90
10 10-70 ––––
10 10-98* 90 180 240 270
12 12-3* 180
12 12-4* 38
12 12-8 90 112 203 292
12 12-10* 60 155 270 295
12 12-14 ––––
12 12-98* 61 135 189 340
14 14-2 58 122
14 14-4* 45
14 14-5* 40 92 184 273
14 14-8 48 162 189 312
14 14-12* 43 90
14 14-15* 17 110 155 234
14 14-18* 15 90 180 270
14 14-19* 30 165 315
14 14-22 45
14 14-71 ––––
14 14-91HV 60
14 14-AA* 45
16 16-8* 54 152 180 331
16 16-23 158 270
16 16-26* 60 275 338
16 16-70 41 122 216 286
16 16-76 ––––
16 16-99* 66 156 223 340
18 18-5 55 97 263 315
18 18-8 180 * Available in Hermetic Class
Insert Rotation
Shell
Size Insert
Arrangement
Degrees
WXYZ
18 18-11* 62 119 241 340
18 18-30* 180 193 285 350
18 18-32* 85 138 222 265
18 18-71 18 108 127 215
18 18-72 53 102 213 293
18 18-75 45
18 18-76 ––––
18 18-80 45 90 135 160
18 18-91HV 90 180 240 270
20 20-16* 238 318 333 347
20 20-24 70 145 215 290
20 20-25 72 144 216 288
20 20-26 13 107 210 322
20 20-27 72 144 216 288
20 20-39* 63 144 252 333
20 20-41* 45 126 225
20 20-70 63 135 222 335
20 20-90 45 135 225 315
22 22-7 19 41
22 22-21* 16 135 175 349
22 22-25 60 125 211 336
22 22-32 72 145 215 288
22 22-34 62 142 218 298
22 22-36 72 144 216 288
22 22-41 39 135 264
22 22-55* 30 142 226 314
22 22-70 30 82 218 312
22 22-71 33 191 236 270
22 22-72 42 200 277 339
22 22-78 19 41
22 22-96* 19 41
24 24-31 90 225 255
24 24-51 22 171 313
24 24-61* 90 180 270 324
24 24-71 39 131 205 281
24 24-79 ––––
®
8
AB
A
B
C
A
BC
D
A
C
B
A
C
B
A
DCB
EA
F
E
DC
B
A
FE
DC
B
AC
B
A
D
C
B
A
H
G
F
E
D
C
B
A
KJ
H
G
FED
C
BA
P
N
M
L
K
J
H
F
E
D
C
B
R
A
D
C
B
H
G
F
E
M
L
K
J
A
H
G
F
E
D
C
B
M
L
K
JR
P
N
A
D
C
B
H
GF E
M
L
K
JP
N
U
T
SR
A
D
C
B
H
GF
E
M
L
K
JTS
R
P
N
UV
Amphenol Miniature Cylindrical
insert arrangements
®
front face of pin inserts illustrated
Insert Arrangement 6-1 8-2 8-3 8-4 8-33 8-98 10-2
Service Rating IIIIIII
Number of Contacts1234332
Contact Size 20 20 20 20 20 20 16
Insert Arrangement 10-5 10-6 10-70 10-98 12-3 12-4 12-8
Service Rating I I Coax I II I I
Number of Contacts5616348
Contact Size 20 20 8 Coax 20 16 16 20
Insert Arrangement 12-10 12-14 12-98 14-2 14- 4 14-5 14-8
Service Rating I I I II I II I
Number of Contacts 10 14 10 2 4 5 6 2
Contact Size 20 20 20 12 12 16 20 12
Insert Arrangement 14-12 14-15 14-18 14-19 14-22 14-71 14-91HV
Service Rating IIIIII
Number of Contacts 8 4 14 1 18 19 1 4 3 1 3
Contact Size 20 16 20 16 20 20 20 12 16 8 Coax 20
For contact legend see page 61.
A
D
C
BE
DA
C
B
A
CB
AD
BC
Flashover
5,000 VAC (RMS)
BA
AB
C
D
E
F
G
H
JK
A
BH
C
D
E
F
G
A
E
DC
B
9
Insert Arrangement 18-75 18-76 18-80 18-91 HV
Service Rating Coax II I, Coax
Number of Contacts 4 3 1 6 2 6
Contact Size 8 Coax 12 Coax 8 Coax 20 8 Coax 20
A
D
C
B
H
G
F
E
A
HGF
E
D
C
B
P
N
M
L
K
J
Z
Y
X
W
V
U
T
S
R
A
Z
YXW
V
U
TS
R
P
N
M
L
K
JHG
F
E
D
C
B
ab
c
A
M
L
K
J
H
G
F
E
D
C
B
P
N
A
M
L
KJHGF
E
D
C
B
TS
R
P
NZ
Y
XWV
U
A
E
DC
B
A
H
G
F
ED
C
B
A
L
K
J
H
G
FED
C
B
A
ZYX
W
V
U
T
S
R
P
N
M
LKJHG
F
E
D
C
B
a
b
cd
e
f
g
A
Z
Y
X
W
V
U
T
S
R
P
N
M
LKJHGF
E
D
C
B
a
b
c
d
e
f
g
h
j
A
H
G
F
E
D
C
B
J
A
D
C
B
A
G
F
E
D
C
BH
Amphenol Miniature Cylindrical
insert arrangements
®
front face of pin inserts illustrated
Insert Arrangement 14-AA 16-8 16-23 16-26 16-70
Service Rating I II I I N/A
Number of Contacts 4 8 22 1 26 14 1
Contact Size 12 16 20 16 20 20 12 Coax
Insert Arrangement 16-76 16-99 18-5 18-8 18-11
Service Rating I II I II
Number of Contacts 8 1 5 21 2 5 8 11
Contact Size 20 12* 2 Coax* 20 16 12 12 16
Insert Arrangement 18-30 18-32 18-71 18-72
Service Rating I I II, Coax N/A
Number of Contacts 29 1 32 8 1 10 4
Contact Size 20 16 20 16 8 Coax 20 12 Coax
Flashover
1.500 VAC (RMS)
*Contact Positions Optional
A
H
B
J
K
D
L
R
E
M
F
N
G
P
C
A
B
C
MP
L
ND
E
H
F
G
J
K
AD
CB
A
D
C
B
Flashover
5,000 VAC (RMS)
A
F
E
DC
B
10
A
M
L
K
J
H
GFE
D
C
B
S
RP
N
A
Z
Y
X
W
V
U
TS
R
P
N
M
L
K
J
H
GFE
D
C
B
a
A
Z
Y
X
W
VU
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
b
A
Z
Y
XWV
U
T
S
R
P
N
M
L
K
JHG
F
E
D
C
B
a
b
c
d
A
Z
Y
X
W
V
U
T
S
R
P
NMLKJHG
F
E
D
C
B
a
r
pn
m
k
j
h
g
fedc
b
i
q
A
Z
Y
X
W
V
U
T
S
R
PNMLKJ
H
G
F
E
D
C
B
a
t
s
r
p
q
n
m
k
j
i
h
g
fedc
b
A
P
N
M
L
K
J
G
FE
D
C
B
H
A
G
FED C
B
A
G
D
C
BF
E
A
X
W
V
UT
S
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
K
J
HG
F
E
D
C
B
a
b
A
R
P
N
MB
b
S
ahc
ZT
LC
j
gd
Y
X
K
J
H
W
V
G
F
U
E
D
fe
Amphenol Miniature Cylindrical
insert arrangements
®
front face of pin inserts illustrated
Insert Arrangement 20-16 20-24 20-25 20-26
Service Rating II I I I
Number of Contacts 16 24 25 20 6
Contact Size 16 20 20 20 12
Insert Arrangement 20-27 20-39 20-41 20-70
Service Rating I I I Coax
Number of Contacts 27 37 2 41 10 4
Contact Size 20 20 16 20 20 8 Coax
Insert Arrangement 20-90 22-7 22-21 22-25
Service Rating Hi-Voltage Coax II I
Number of Contacts 7 7 21 25
Contact Size 20 8 Coax 16 16
Insert Arrangement 22-32 22-34 22-36 22-41
Service Rating I I I I
Number of Contacts 32 34 36 27 14
Contact Size 20 20 20 20 16
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
l
k
j
h
g
f
e
d
c
b
A
T
S
B
V
U
R
C
f
W
P
D
mh
g
e
X
N
E
n
lj
d
M
L
KJ
a
c
bZ
Y
H
G
F
k
A
Z
Y
X
W
V
U
T
S
R
P
NMLK
J
H
G
F
E
D
C
B
a
t
s
r
q
p
n
m
k
j
i
h
g
f
e
d
c
b
A
BC
D
E
F
G
H
JK
L
M
N
P
R
ST
UV
W
X
Y
Z
a
b
c
11
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
x
wv
u
t
s
r
q
p
n
m
y
k
j
i
h
g
fe
d
c
b
z
HH
GG
FF
EE
DD
CC
BB
AA
A
G
F
E
D
C
B
HJ
A
G
F
E
D
C
B
A
G
F
E
D
C
B
A
X
W
V
U
T
S
R
Q
P
Y
N
M
L
K
J
H
GF
E
D
C
B
Z
a
g
f
e
d
c
b
A
Z
Y
X
W
V
U
T
S
R
PNML
K
J
H
G
F
E
D
C
B
a
z
y
x
w
v
u
t
s
r
p
nm
q
kj
i
h
g
f
e
d
c
b
AA
PP
NN
MM
LL
KK
JJ
HH
GG
FF
EE
DD
CC BB
a
e
C
B
D
d
f
E
g
F
i
G
h
j
m
p
n
q
r
AA
BB
b
Xt
y
Z
Y
A
W
V
U
T
S
R
PNMLK
J
H
z
w
k
v
x
s
u
c
Amphenol Miniature Cylindrical
insert arrangements
®
front face of pin inserts illustrated
Insert Arrangement 22-55 22-70 22-71 22-72
Service Rating I I, Coax I, Coax N/A
Number of Contacts 55 13 6 2 7 12 4 3
Contact Size 20 20 8 Coax 20 8 Coax 20 16 8 Coax
Insert Arrangement 22-78 22-96 24-31 24-51
Service Rating Coax II I I
Number of Contacts 7 7 31 47 4
Contact Size 8 Coax 12 for 16 20 12 Coax
# 10 wire
Insert Arrangement 24-61 24-71 24-79
Service Rating I N/A Coax
Number of Contacts 61 45 2 2 1 5
Contact Size 20 20 16 8 Coax 20 8 Coax
Contact Legend
Symbol Contact Size
20
16
12
HV
12 Coax
8 Coax
V
KD
TP
B
LC
E
H
M
J
F
G
RS
N
A
U
A
V
F
E
N
L
T
J
HD
M
R
G
P
S
U
C
KB
B
C
D
E
F
G
H
K
i
j
N
P
R
S
T
U
V
W
X
Y
Z
aA
b
d
e
f
J
M
h
m
n
p
q
r
y
t
L
g
BBDD
CC
AA
uc
v
z
s
x
k
w
F
AD
EBC
12
wall mounting
receptacle
Amphenol PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
bayonet coupling and solder termination
cable connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
thru bulkhead
receptacle
Amphenol® solder contact miniature cylindric al conne ctors
meet the most critical application needs. Design versatility
combined with high reliability performance makes these
series of Miniature Cylindrical Connectors ideal for environ-
mental sealing or pressurized applications.
The MS/PT Series is qualified to MIL-C-26482, Series 1 and has
all the outstanding design characteristics and quality of the PT
Series. The SP Serie s is a modification of the PT, providi ng special
shells with a wide mounting flange for back panel mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromat e after-treatm ent is used on the PT
and MS/PT. The SP is given a dura ble non-conductiv e hard anodic
“Alumilite”® coating which provides abrasion protection and resis-
tance to corrosion.
Shell com po nen ts for the se series are alum in um . The dep end abl e
5 key/keyway polarization with bayonet lock coupling assures pos-
itive mating with no chance of cross plugging. Spring tension pro-
vided by a wave washer in the coupling nut ensures maintenance
of interfacia l seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gasket
and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and are
gold plated. This gold plating eliminates contact corrosion and
offers an indefi nite s helf li fe. Sock et co ntacts for these s eries are a
closed entry design. A breakaway style plug is available in the PT
solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Recep tacles with printed circuit boar d contacts
are also available.
PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5.
The PT, SP and MS/PT Series are intermateable and intermount-
able with all existing Miniature Cylindrical Series connectors
except for the threaded coupling PC Series.
Refer to pages 4-11 for insert arrangement availability.
PT, SP, MS/PT
CONTACT D ATA/CONNECTOR RATINGS
Contact Specifications
Contact
Size Test
Current Maximum
Millivolt Drop† Solder Well
Diameter Solder Well
Depth
20 7.5 55 .046 .125
16 13.0 50 .078 .188
12 23.0 42 .116 .188
Servi ce R ati ng
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000
ft. 70,000
ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
Silver plated wire per MIL-C-26482
* This connector style is sometimes referred to as a cable connecting
“plug.” It does, however, mate with a straight or 90 degree plug.
®
+.004
–.000 +.031
–.000
+.005
–.003 +.031
–.000
breakaway
twist pull
plug
+.004
–.002 +.031
–.000
13
PT, SP Service Classes
PT and SP connectors are available in the service
classes listed below. Each class, with the exception of
hermetic, offers one or more means of terminating or
supporting a cable or wire bundle. Class “W” is not
ava i lable in the SP S erie s .
“A” General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for
cable or wire bundle support
“C” Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F
“E” Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
“E” (SR) Environmental resistant strain relief clamp
and gromm et for moistur e proo fing indi vidua l
wires; provides added wire bundle support
“J” Same as “W” class except with strain relief
“P” Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining cus-
tomer applied potting compounds, with pro-
vision for wire support
“W” Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close-down.
“H”* Hermetically sealed with compression glass
inserts (see pages 22-25)
Style with printed circuit board contacts- see page 20.
Breakaway style - se e page 26.
MS/PT Service Classes
The MS/PT Miniature connector is available in the fol-
lowing certified service class es:
“E” Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
“F” Grommet seal with strain relief clamp
“P” Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
“A”
general duty
“E” (SR),
MS / “F”
strain relief
“E”,
MS / “E”
open wire seal
“P”,
MS / “P”
potting boot
“W”
cable seal
BAYONET COUPLING
WITH SOLDER CONTACTS
PT, SP, MS/PT
14
ND
L
ND
XL
TERMINATION ASSEMBLIES
“A” General Duty/
“C” Pressurized“
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
“E” Open Wire Seal
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
“P” Potting Boot
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
“W” Cable Seal
PT00W-XX-XXX
“J” Cable Seal
PT00J-XX-XXX
MS3110J-XX-XXX
To complete part number see how to order on page 27.
(MMC) located within .0025 of (TP)
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View Class “A”, “C”
R
(TP) S
Max. A
+.001
–.005
K +.020
–.010 L
Max.
M +.010
–.000 Q
Thread
Class 2A
Z
Max. D
Min. L
Max. N
Max.
V
Thread
Class APT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF .468 .438 .175 1.553 .462 .3750-32 NEF
8 .594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF
10 .719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF .468 .438 .421 1.553 .717 .6250-24 NEF
12 .812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF .468 .438 .546 1.553 .834 .7500-20 UNEF
14 .906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF
16 .969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF
18 1.062 1.203 1.312 1.5 16 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF .531 .438 .879 1.553 1.216 1.1875-18 NEF
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF .531 .531 1.014 1.703 1.332 1.1875-18 NEF
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF .531 .531 1.134 1.703 1.460 1.4375-18 NEF
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF .498 .498 1.259 1.765 1.585 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
C
Thread D
Min. G
Max. H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max. XL
Max.Closed Free
6 1.266 .440 .192 1.438 .484
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
PT00 (MS3110)
SP00
wall mounting receptacle
ND
V
L
.375 MIN
G
L
C
NDH
L
NN
L
D
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
L
Q
M
A
KZ
4 Holes
15
ND
L
ND
XL
S
S
YA
K
Z
M
L
Q
TERMINATION ASSEMBLIES
“A” General Duty
PT01A-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
“E” Open Wire Seal
PT01E-XX-XXX
MS3111E-XX-XXX
“P” Potting Boot
PT01P-XX-XXX
MS3111P-XX-XXX
“W” Cable Seal
PT01W-XX-XXX
“J” Cable Seal
PT01J-XX-XXX
MS3111J-XX-XXX
Note:This c onnector style is some times referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 27.
All dimensio ns for reference only.
Shell
Size
Recept. Front View Receptacle Side View Class “A”,
S
±.020 Y
±.020
A
+.001
–.005
K
+.020
–.010 L
Max.
M
+.016
–.000
Q
Thread
Class 2A Z
Max. D
Min. L
Max. N
Max.
V
Thread
Class A
6 .688 .812 .348 .494 .906 .400 . 3125-32 NEF .948 .175 1.553 .462 .3750-32 NEF
8 .812 .938 .473 .494 .906 .400 .4375-28 UNEF .948 .297 1.553 .590 .5000-28 UNEF
10 .938 1.062 .590 .494 .906 .400 .5625-24 NEF .948 .421 1.553 .717 .6250-24 NEF
12 1.031 1.156 .750 .494 .906 .400 .6875-24 NEF .948 .546 1.553 .834 .7500-20 UNEF
14 1.125 1.250 .875 .494 .906 .400 .8125-20 UNEF .948 .663 1.553 .970 .8750-20 UNEF
16 1.219 1.344 1.000 .494 .906 .400 .9375-20 UNEF .948 .787 1.553 1.088 1.0000-20 UNEF
18 1.312 1.438 1.125 .494 .906 .400 1.0625-18 NEF .948 .879 1.553 1.216 1.1875-18 NEF
20 1.438 1.562 1.250 .650 1.125 .535 1.1875-18 NEF 1.166 1.0 41 1.703 1.332 1.1875-1 8 NEF
22 1.562 1.688 1.375 .650 1.125 .535 1.3125-18 NEF 1.166 1.1 35 1.703 1.460 1.4375-1 8 NEF
24 1.688 1.812 1.500 .683 1.188 .568 1.4375-18 NEF 1.166 1.2 59 1.765 1.585 1.4375-1 8 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J
C
Thread D
Min. G
Max. H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max. XL
Max.Closed Free
6––––––1.266.440.1921.438.484
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985
PT01 (MS3111)
cable connecting receptacle
ND
.375 MIN
V
L
G
L
C
NDH
L
NN
L
D
16
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
* PT02W-XX-XXX
* SP02W-XX-XXX
To complete part number see how to order on page 27.
(MMC) located within .0025 of (TP)
* The PT02 and SP02 box mounting receptacles are made only to complete a series;
no provision is made for accessories or potting on the rear skirt.
All dimensio ns f or ref ere nce only .
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S A
+.001
–.005
K
+.020
–.010 L
Max.
M
+.010
–.000 N
Dia.
Max.
Z
Max.
PT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438
8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438
10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438
12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438
14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438
16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497
PT02 (MS3112)
SP02
box mounting receptacle
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
AN
KZ
L
M
4 Holes
17
ND
L
ND
XL
TERMINATION ASSEMBLIES
“A” General Duty
PT06A-XX-XXX
SP06A-XX-XXX
PTG06A-XX-XXX
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-X XX (SR)
PTG06E-XX-X XX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-X XX (SR)
PTG06P-XX-X XX (SR)
MS3116F-XX-XXX
“E” Open Wire Seal
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
“P” Potting Boot
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
“W” Cable Seal
PT06W-XX-XXX
SP06W-XX-XXX
PTG06W-XX-XXX
“J” Cable Seal
PT06J-XX-XXX
MS3116J-XX-XXX
* Available in PT06 only
All dimensio ns for reference only.
Shell
Size
Plug Fr ont View Plug Side View Class “A”
S
Max. J L
Max. Q Thread
Class 2A Z
Max. D
Min. L
Max. N
Max. V Thread
Class A
6 .625 .353 .906 .3125-32 NEF .594 .175 1.609 .462 .3750-32 NEF
8 .750 .353 .906 .4375-28 UNEF .594 .297 1.609 .590 .5000-28 UNEF
10 .859 .353 .906 .5625-24 NEF .594 .421 1.609 .717 .6250-24 NEF
12 1.013 .353 .906 .6875-24 NEF .594 .546 1.609 .834 .7500-20 UNEF
14 1.156 .353 .906 .8125-20 UNEF .594 .663 1.609 .970 .8750-20 UNEF
16 1.281 .353 .906 .9375-20 UNEF .594 .787 1.609 1.088 1.0000-20 UNEF
18 1.319 .353 .906 1.0 625-18 NEF .594 .879 1.609 1.216 1.1875-18 NEF
20 1.531 .415 1.062 1.1875-18 NEF .67 2 1.014 1.656 1.332 1.1875-18 NEF
22 1.656 .415 1.062 1.3125-18 NEF .67 2 1.135 1.656 1.460 1.4375-18 NEF
24* 1.776 .415 1.125 1.4375-18 NEF .672 1.259 1.750 1.587 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P” Class “W”, “J”
C
Thread D
Min. G
±.010 H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max. XL
Max.Closed Free
6 1.266 .440 .192 1.526 .484
8 6-32 .240 .125 .812 1.906 .550 1.266 .560 .317 1.526 .608 .168 .230 1.705 .547 2.271
10 6-32 .302 .188 .875 1.906 .675 1.266 .685 .434 1.526 .734 .205 .312 1.705 .675 2.271
12 6-32 .428 .312 1.000 1.906 .803 1.266 .813 .548 1.526 .858 .338 .442 1.848 .812 2.411
14 6-32 .552 .375 1.125 1.906 .920 1.266 .930 .673 1.526 .984 .416 .539 2.040 .940 2.599
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.526 1.110 .550 .616 2.256 1.067 2.943
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.526 1.234 .600 .672 2.486 1.194 3.172
20 8-32 .740 .625 1.438 2.250 1.290 1.438 1.301 1.024 1.546 1.360 .635 .747 2.844 1.322 3.610
22 8-32 .928 .750 1.625 2.250 1.418 1.438 1.430 1.149 1.546 1.484 .670 .846 3.000 1.449 3.766
24* 8-32 .990 .800 1.750 2.312 1.543 1.500 1.555 1.274 1.656 1.610 .740 .894 3.210 1.576 3.985
PT06 (MS3116)
SP06
straight plug
To complete part number see how to order on page 27.
SL
ZQJ
ND
.375 MIN
V
L
G
L
C
NDH
L
NN
L
D
18
TERMINATION ASSEMBLIES
“E” Open Wire Seal
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
“A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
“P” Potting Boot
PT07P-XX-XXX
MS3114P-XX-XXX
* Size 24 strain relief available in PT only. All dimensions for reference only.
Shell
Size
Recept. Front View Receptacle Side View Class “E”, MS / “E
H
±.016 S
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010 M
P Panel Thickness R
Thread
Class 2A UNEF Z L
Max. M N
Max. Z
±.040Min. Max.
6 .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 .231 .568 .696 .604 .191
8 .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191
10 .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191
14 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221
24 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188
Shell
Size
Class “A” (SR), “P” (SR), MS / “F” Class “E” (SR) Class “P”, MS / “P”
C
Thread D
Max. G H L M C
Thread D
Max. G H L M D
Max. L +.010
–.026 M N Z
6––––––––––––.202.593.696.484.191
8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191
10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191
12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191
14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191
16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191
18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191
20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221
22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221
24* 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188
PT07 (MS3114)
SP07
jam nut receptacle
To complete part number see how to order on page 27.
“A” General Duty/
“C” Pressurized Receptacle
PT07A-XX-XXX
PT07C-XX-XXX
S
H
SJA
M
Z
RPK
JN
A
MZ
RPL
JA
MZ
C
RPL
GD H JA
MZ
RPL
DN
19
D
C
B
E
L
A
H
K
L
TERMINATION ASSEMBLIES
“E” Open Wire Seal, “E” (SR) Strain Relief “P” Potting Boot 75 degrees
PT08E-XX-XXX
SP08E-XX-XXX
PT08E-XX-XXX (SR)
SP08E-XX-X XX (SR)
PT08P-XX-XXX
SP08P-XX-XXX
To complete part number see how to order on page 27.
All lockwire holes are .044 Dia. Min.
All dimensions f or reference only.
Shell
Size
Plug Front View Plug Side View
G
Dia.
Max.
Class “E”, “E” (SR) Class “P”
B
±.031
C
+.010
–.025 D
±.062
E
+.047
–.025 L
±.057 A
±.025 H
±.015 K
±.015 L
Max.
8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656
10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781
12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843
14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953
16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000
18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046
20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218
22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265
24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624
PT08 E
SP08 E
90 degree plug
G
20
All dimensio ns f or ref ere nce only .
Shell
Size
Part Number*
PT07 with PCB
Contacts
Receptacle Front
View Receptacle Side View
H
+.017
–.016 S
±.010
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010 M
±.010
P Panel
Thickness R
Thread
Class 2A
Z
+.025
–.035Min. Max.
6 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 UNEF .376
8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 UNEF .376
10 71-533722-XXX .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 UNEF .376
12 71-533723-XXX 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 UNEF .376
14 71-533724-XXX 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF .376
16 71-533725- XXX 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 UNEF .376
18 71-533726- XXX 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376
20 71-533727- XXX 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367
22 71-533728- XXX 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367
24 71-533729- XXX 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 UNEF .334
* For RoHS compliance connectors with PCB contacts change “71”- to:
“58” designates conductive black zinc cobalt plating
“93” desi gna tes non -co ndu ctiv e black zinc coba lt plati ng
PT Connectors with
Printed Circuit Board Contacts
All dimensio ns f or ref ere nce only .
Shell
Size
Part Number*
PT02 wit h PCB
Contacts
Receptacle Front View Receptacle Side View
R
(TP)
S
+.011
–.010
A
+.001
–.005
K
+.021
–.010 L
Max.
M
+.010
–.000
N
Dia.
Max.
Z
+.040
–.050
6 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380
8 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380
10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380
12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380
14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380
16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380
18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380
20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286
22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286
24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253
Jam Nut Receptacle (PT07)
with PCB Contacts
All lockwire holes are .044 Dia. Min.
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-11.
Box Mounting Receptacle (PT02)
with PCB Contacts
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-11.
(MMC) located within .0025 of (TP)
S
S
R
(TP)
R
(TP)
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
4 HOLES
AN
KZ
L
M.030 ± .001
S
H
SJA
MZ
RPK
.030 ± .001
21
* PTB-XX-XXX
* SPB -XX-XXX
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
(MMC) located within .0025 of (TP)
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S A
+.001
–.005
K
+.016
–.000 L
±.005
M
+.010
–.000
P
Max.
PTB SPB PTB SPB PTB SPB
6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188
8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188
10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188
12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188
14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188
16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188
18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188
20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312
22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312
24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312
PTB
SPB
thru bulkhead receptacle
S
S
R
(TP)
R
(TP)
PTB
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SPB
.150 ± .005 Dia.
L
M
P
A A
K
4 Holes
22
solder
mounting
receptacle
box
mounting
receptacle
jam nut
receptacle
Three shell styles are available in the hermetic PT bayonet
series:
•PTIH (MS3113H)
•PT02H
PT07H (MS3114H)
These herm etic connectors are only availabl e with solder cup or
flat eyelet pin contacts in the MS/PT version. Socket contacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as fol-
lows:
Shell sizes: 8 through 24 (tin plated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current: 5.0 amp each #20 contact
10 amp each #16 contact
17 amp each #12 contact
Contacts are tin plated for PT; gold is optional
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential
Physical Shock: 100 G’s
Vibration: Exceeds MIL-E-5272 Procedure II
Thermal Shock: No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-11 for insert arrangement availability.
PT
hermetic
23
*PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
†PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100 )
†† MS3113H-XXYXXX
All dimensions for reference only.
Shell
Size
Recept.
Front View Receptacle
Side View
G
Dia.
Max.
A Dia.
+.001
–.005
L
+.025
–.016
N Dia.
+.001
–.005
W
+.011
–.010 Z
Max.
6 .511 .348 .447 .438 .094 .386
8 .636 .473 .447 .562 .094 .386
10 .761 .590 .447 .672 .094 .386
12 .855 .750 .447 .781 .094 .386
14 .980 .875 .447 .906 .094 .386
16 1.105 1.000 .447 1.031 .094 .386
18 1.229 1.125 .447 1.156 .094 .386
20 1.323 1.250 .509 1.250 .094 .386
22 1.449 1.375 .509 1.375 .125 .418
24 1.574 1.500 .542 1.500 .125 .418
PTIH (MS3113H)
hermetic solder mounting receptacle
To comple te par t numb er see how to ord er on pag e 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin cont acts wi tho ut inter facia l seal
††Fla t eyelet pi n cont acts wi th inter facial seal
G
AN
WL
Z
.031 +.006
–.005
24
* PT02H-XX-XXX
** PT02Y-XX-XXX
PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S
±.016
A Dia.
+.001
–.005 K
±.015
L
+.025
–.015
N Dia.
+.001
–.005
U
+.011
–.010 Z
Max.
6 .469 .688 .348 .047 .494 .438 .062 .344
8 .594 .812 .473 .047 .494 .562 .062 .344
10 .719 .938 .590 .047 .494 .672 .062 .344
12 .812 1.031 .750 .047 .494 .781 .062 .344
14 .906 1.125 .875 .047 .494 .906 .062 .344
16 .969 1.219 1.000 .047 .494 1.031 .062 .344
18 1.062 1.312 1.125 .047 .494 1.156 .062 .344
20 1.156 1.438 1.250 .047 .556 1.250 .062 .344
22 1.250 1.562 1.375 .079 .556 1.375 .062 .377
24 1.375 1.688 1.500 .079 .588 1.500 .062 .377
PT02H
hermetic box mounting receptacle
To comple te par t numb er see how to ord er on pag e 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin cont acts wi tho ut inter facia l seal
††Fla t eyelet pi n cont acts wi th inter facial seal
(MMC) located within .0025 of (TP)
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
AN
WL
ZU
4 Holes
25
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
All dimensio ns for reference only.
Shell
Size
Receptacle Front
View Receptacle Side View
S
+.016
H Hex
+.017
–.016
A
+.001
–.005
K
+.043
–.016
M
+.031
–.000
P Panel Thickness R
Thread
Class 2A Z
Max.Max. Min.
6 .812 .625 .348 .094 .696 .125 .062 .4375-28 UNEF .206
8 .938 .750 .473 .094 .696 .125 .062 .5625 -24 NEF .206
10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 NEF .206
12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 UNEF .206
14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 UNEF .206
16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 NEF .206
18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 NEF .206
20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 NEF .081
22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081
24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048
PT07H (MS3114H)
hermetic jam nut receptacle
To complete part number see how to order on page 27.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin cont acts wi tho ut inter facia l seal
††Fla t eyelet pi n cont acts wi th inter facial seal
S
H
SA
MZ
RPK
26
Breakaway Plug
with PT Solder Contacts,
Potted Termination
71-3048XX-( )
72-3048XX-( )
PT Breakaway
twist pull plug
All dimensio ns for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing abo ve shows standard lanya rd leng th.
Part
Number* Shell
Size A Dia.
Max. B
Max. H
±.016 J
±.010 L
Max.
71-304808 8 .875 .984 .327 .353 1.937
71-304810 10 1.125 1.125 .444 .353 1.890
71-304812 12 1.281 1.406 .558 .353 1.906
71-304814 14 1.438 1.562 .683 .353 1.953
71-304816 16 1.562 1.688 .808 .353 2.000
71-304818 18 1.718 1.844 .909 .353 2.031
71-304820 20 1.875 2.000 1.034 .415 2.234
71-304822 22 2.031 2.188 1.159 .415 2.328
71-304824 24 2.156 2.312 1.284 .415 2.359
Order by Amphenol Propriety number as follows (example part number shown):
71 - 3048 18 - 32 P
12 3 4
1. Finish
“71”designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and
corrosion resistance, 500 hour extended sa lt spray.
2. Connector Type Identification
3048 designates PT plug, solder, potted termination style
3. Shell Size and Insert Arrangement Number
See insert arrangement availability for Miniature Breakaway connectors on page 6. The numbers in the insert
arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is
the insert arrangement number.
4. Contact Type/Alternate Insert Rotation
P designates pin, S designates socket for normal
positioning of inserts. When an alternate position
of the insert is required to prevent cross-mating
a different letter (other than P or S) is used. See
page 7 for description of alternate positions; then
convert to Amphenol proprietary coding by the
chart at right to complete the part number.
The PT min i at ur e br eakaway co nnector has the fo llow-
ing design features:
solder contacts , potted termination
instant decoupling of plug and receptacle with an
axial pul l on th e la nyard when th ey ar e f ull y m at ed
in t er m at eable with sta nda rd receptacl es
operating voltage to 900 VAC (RMS) at sea level
same quic k pos i tive b ay onet couplin g and 5 key/
keyway polarization as other PT styles
Pin Contacts Socket Contacts
Amphenol
Letter Equates to
MS letter Amphenol
Letter Equates t o
MS letter
GPWHSW
IPXJSX
KPYLSY
MPZNSZ
.328
PIN INSERT
LANYARD PULLED TAUT
AGAINST A .200 ±.031 DIA MANDREL
.016
4.500
J
H
SOCKET INSERT
+.010
–.025
±.250
+.010
–.025
L
B
A
27
PT, SP
To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is
shown as follows:
PT 00 A - 20 - 41 P W (SR)
1 2345678
See code below:
1. Connector Type
“PT” designates stand ard olive drab, electrically conductive cadmium plate
bayonet lock connector with solder contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet lock
connector with solder contacts and larger flange and mounting holes for
back panel mounting
“PTG” designates plug with grounding fingers
2. Shell Style
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle**
“02” designates box mounting receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90 degree plug cable support
“B” designates thru bulkhead receptacle (pressurized)
I designates solder mount receptacle (Hermetic only)
3. Service Classes
“A” designates general duty back shell
“C” designates pressurized recept acle
“E” designates environmental resisting open wire seal with grommet and nut
“J” designat es clamp assembly for moisture proofing multi-jacketed cables,
with strain relief
“P” designates assembly with potting boot
W” designates clamp assembly for moisture proofing multi-jacketed cables
“H” designates hermetic* without interfacial seal
“Y” designates hermetic* with interfacial seal
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement - Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number following the hyphen is
the number only that is used in the part number).
6. Contacts
“P” designates pin contacts
“S” designates socket contacts
For ordering connectors with printed circuit board contacts, see pg. 20.
7. Insert Rotation - Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position.
No letter required for normal (no rotation) position.
8. “SR ” designates a strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) elect roless nickel
(024) olive drab zinc cobalt plating
(424) elect roless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(100) Suf fix added for flat eyelet pin contacts in hermetic versions
OR
RoHS Compliant finish suffix as follow:
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(470) non-conductive black zinc cobalt plating
with strain relief
(476)
conductive black zinc cobalt plating with strain
relief
MS/PT
MIL-C-26482, Series 1
Part number MS3110E20-41PW is shown as follows:
MS 311 0 E 20 - 41 P W
1 2345678
For Hermetic connectors part number
MS3113H20Y41P W is shown as follows:
MS 311 3 H 20 Y 41 P W
1 234 5, 6 78
See code below:
1. “MS” designates Military Standard
2. Specif ication Number
“311” designates basic family number for MIL-C-
26482, Series 1 solder type
3. Shell Style
“0” designates wall mounting receptacle
“1” designates cable connecting receptacle**
“2” designates box mounting receptacle
“3” designates solder mount receptacle (hermetic
only)
“4” designates jam nut receptacle
“6” designates straight plug
4. Service Class
“E” designates environmental resisting connector
“F” designates environmental resisting connectors
with strain relief
“J” designates clamp assembly for moisture proof ing
multi-jacketed cables, with strain relief
“P” designates potted type with potting boot
“H” designates hermetic
5. Shell Size
“20” designates shell size. Shell sizes 8 through 24
available.
6. Insert Arrangement - Refer to pages 4-11 for insert
availability.
“20 - 41” designates arrangement. (The number fol-
lowing the hyphen is the number only that is used in
the part number).
Hermetic version
“20Y41” designates insert arrangement ; specify “Y”
for flat eyelet pin contacts, or “C” for solder cup pin
contacts
7. Co ntact Configuration
“P” designates pin contacts
“S” designates socke t contacts
8. Insert Rotation- Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in it
shell from “normal” position. No letter require fo nor-
mal (no rotation) position.
* Hermetic connectors are supplied with tin plated shel ls.
** This connector style is sometimes referred to as a cable connect-
ing “plug”. It does, however, mate with either a straight or 90
degree plug.
For order in g M ini at ur e Br eak aw ay PT Solder con nec-
tors see pg. 26.
PT, SP, MS/PT
how to order
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
HOW TO ORDER
PT, SP, MS/PT
28
wall mounting
receptacle
Amphenol PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-C-26482, Series 1
bayonet coupling and crimp termination
cable
connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
breakaway
twist pull
plug
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower reten-
tion system.
The MS/P T-SE Series is qualifie d to MIL-C-26482, Seri es 1 and
has all t he out sta ndi ng de sign charac teri sti cs and qu ali ty of the
PT Series.
The SP-SE Series is a modification of the PT-SE, providing
special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium
plate w ith an oliv e drab ch romate after-trea tment i s used on th e
PT-SE and MS/PT-SE. The SP-SE is given a durable non-con-
ductive hard anodic “Alumilite”® coating which provides abra-
sion protection and resistance to corrosion.
Shell components for these series are aluminum. The depend-
able 5 key/keyway polarization with bayonet lock coupling
assures positive mating with no chance of cross plugging.
Spring tension provided by a wave washer in the coupling nut
ensures ma intenance of interfa cial s ea l between m ati ng h alv es .
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Breakaway style plug is available in PT-SE crimp.
The PT-SE, SP-SE and MS/PT-SE Series are intermateable
and inter mounta ble with all exist ing Mi niature Cylind rical Se ries
connectors except for the threaded coupling PC Series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
®
29
PT-SE. SP-SE, MS/PT-SE
† Silver plated wire per MIL-C-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the
three service classes listed below.
“SE” Open wire sealing - environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
Breakaway style - se e page 38.
MS/PT-SE Service Classes
MS-SE serie s c on nec to rs a re av ai la ble in the follow in g
certified service classes:
“E” Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofing individual open wires
“F” Environmental resistant strain relief clamp
and gromm et for moistur e proo fing indi vidua l
wires; provides added wire bundle support
“P” Potting applications - these connectors are
supplied with a translucent nylon boot for
retention of customer applied potting com-
pound
Contact Specifications
Contact
Size Test
Current
Maximum
Millivolt
Drop† Cr imp Well
Diameter Minimum
Well Depth
20 7.5 55 .049 ±.001 .267
16 13.0 49 .067 ±.001 .236
12 23.0 42 .100 ±.002 .236
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000
ft. 70,000
ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
“SE”,
MS / “E”
open wire seal
“SE” (SR),
MS / “F”
strain relief
clamp
“SP”,
MS / “P”
potting boot
BAYONET COUPLING
WITH CRIMP CONTACTS
PT-S E, SP -S E, MS/PT -S E
30
TERMINATION ASSEMBLIES
“SE” Open Wire Seal
PT00SE-XX-XXX
SP00SE-XX-XXX
MS3120E-XX-XXX
“SE” (SR), MS / “F” Strain Relief
PT00SE-XX-XXX (SR)
SP00SE-XX-XXX (SR)
MS3120F-XX-XXX
“SP” Potting Boot
PT00SP-XX-XXX
SP00SP-XX-XXX
* Back panel mounting
All dimensions f or reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S
Max. T Dia.
± .005 A Dia.
+.001
–.005 K
±.016
M
+.010
–.000 P*
Max. P anel Thickness
PT SP PT SP PT SP PT SP PT SP
8 .594 .828 .120 .473 .062 .431 .094
10 .719 .812 .954 1.141 .120 .150 .590 .062 .431 .462 .094 .125
12 .812 .938 1.047 1.266 .120 .150 .750 .062 .431 .462 .094 .125
14 .906 1.031 1.141 1.360 .120 .150 .875 .062 .431 .462 .094 .125
16 .969 1.125 1.234 1.453 .120 .150 1.000 .062 .431 .462 .094 .125
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .062 .431 .462 .094 .125
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .094 .556 .556 .219 .219
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .094 .556 .556 .219 .219
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .094 .589 .589 .219 .219
Shell
Size
Class “SE”, MS / “E Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
L
Max. N Dia.
Max G
Dia. L
Max. N
Max. D Dia.
Max. L
Max. N Dia.
Max.
8 1.328 .560 .125 2.422 .781
10 1.328 .704 .188 2.422 .844 .444 1.656 .734
12 1.328 .825 .312 2.422 .969 .558 1.656 .858
14 1.328 .954 .375 2.422 1.094 .683 1.656 .984
16 1.328 1.080 .500 2.537 1.156 .808 1.656 1.110
18 1.328 1.204 .625 2.537 1.406 .909 1.656 1.234
20 1.359 1.330 .625 2.824 1.406 1.034 1.750 1.360
22 1.359 1.454 .750 2.824 1.594 1.159 1.750 1.484
24 1.422 1.580 .800 2.900 1.688 1.284 1.782 1.610
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
To complete part number see how to order on page 39.
(MMC) located within .005 of (TP)
S
S
R
(TP)
R
(TP)
T Dia.
4 Holes
A
MK
N
L
AGN
KM
L
AD
L
KM
N
31
TERMINATION ASSEMBLIES
MS / “E” Open Wire Seal
MF00SE-XX-XXX
MS3128E-XX-XXX
MS / “F” Strain Relief
MF00SE-XX-XXX (SR)
MS3128F-XX-XXX
All dimensio ns f or ref ere nce only .
Shell
Size
Receptacle Front View Receptacle Side View
RR
1S
Max. T Dia.
±.005 T1 Dia.
±.005
A Dia.
+.001
–.005 K
±.016
M
+.010
–.000
Class MS / “E” Class MS / “F”
L
Max. N
Max. F
Min. G
Dia. L
Max. N
Max.
10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891
12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016
14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141
16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203
18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.328 1.175 .734 .625 2.000 1.469
20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469
22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656
24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750
MF00 SE (MS3128)
wall mounting receptacle
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
S
S
R
(TP)
(TP)
R
(TP)
(TP)
T Dia.
4 Holes
T¹ Dia.
4 Holes
MK
N
A
L
AGFN
KM
L
32
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal
PT01SE-XX-XXX
SP01SE-XX-XXX
MS3121E-XX-XXX
“SE” (SR), MS / “F” Strain Relief
PT01SE-XX-XXX (SR)
SP01SE-XX-XXX (SR)
MS3121F-XX-XXX
“SP”, MS / “P” Potting Boot
PT01SP-XX-XXX
SP01SP-XX-XXX
MS3121P-XX-XXX
All dimensions f or reference only.
Shell
Size
Receptacle
Front View Receptacle
Side View
S
Max.
Class “SE”, MS / “E Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
A Dia.
+.001
–.005 K
±.018 L
Max.
N
Dia.
Max. G
Dia. L
Max. N
Max. D
Dia. L
Max.
N
Dia.
Max.
8 .812 .473 .094 1.522 .560 .125 2.422 .828
10 .955 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734
12 1.048 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858
14 1.142 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984
16 1.236 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110
18 1.329 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234
20 1.455 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360
22 1.579 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484
24 1.709 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
Note:This c onnector style is some times referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 39.
S
S
K K
N
A
L
AGN
L
A
L
DN
K
33
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
All dimensio ns f or ref ere nce only .
Shell
Size
Receptacle Front View Receptacle Side View
RS
Max.
T
Dia.
±.005
A
Dia.
+.001
–.005
D
Max. K
±.016 L
Max.
M
+.010
–.000
N
Dia.
+.011
–.000PT SP PT SP PT SP PT SP PT SP
8 .594 .828 .120 .473 .312 .062 1.296 .431 .438
10 .719 .812 .954 1.141 .120 .150 .590 .312 .219 .062 1.296 .431 .462 .562
12 .812 .938 1.047 1.266 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688
14 .906 1.031 1.141 1.360 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812
16 .969 1.125 1.234 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S
S
R
(TP)
R
(TP)
T Dia.
4 Holes
L
K
M
AN
D
34
MF02SE-XX-XXX
MS3127E-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
All dimensions for reference only.
Shell
Size
Recep tac le Fr on t Vi ew Recep tac le Si de View
N
Dia.
+.011
–.000 R R1S
Max. T
±.005 T1
±.005
A
Dia.
+.001
–.005 D
Max. K
±.016 L
Max.
M
+.010
–.000
10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462
12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462
14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462
16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462
18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462
20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556
22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556
24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589
MF02 SE (MS3127)
box mounting receptacle
S
S
R
(TP)
(TP)
R
(TP)
(TP)
T Dia.
4 Holes
L
K
M
AN
D
T¹ Dia.
4 Holes
35
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal
PT06SE-XX-XXX
SP06SE-XX-XXX
PTG06SE-XX-XXX
MS3126E-XX-XXX
“SE” (SR), MS / “F” Strain Relief
PT06SE-XX-XXX (SR)
SP06SE-XX-XXX (SR)
PTG06SE-XX-XXX (SR)
MS3126F-XX-XXX
“SP”, MS / “P” Potting Boot
PT06SP-XX-XXX
SP06SP-XX-XXX
PTG06SP-XX-XXX
MS3126P-XX-XXX
* PT-SE, MS-SE and MS-SP only.
All dimensions f or reference only.
Shell
Size
Plug
Front View Plug
Side View
S Dia.
Max. Z
±.045 Z1
±.045
Class “SE”, MS / “E” Class “SE” (SR), MS / “F” Class “SP”, MS / “P”
L
Max. N
Max. G
Dia. L
Max. N
Max. D
Dia. L
Max. N Dia.
Max.
8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578
10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734
12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858
14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984
16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110
18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234
20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360
22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484
24 1.777 .640 .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610
PT06 SE (MS3126)
SP06 SE
straight plug
To complete part number see how to order on page 39.
S
L
N
Z pin contacts
Z¹ socket contacts
L
ND
Z pin contacts
Z¹ socket contacts
L
NG
Z pin contacts
Z¹ socket contacts
36
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal
PT07SE-XX-XXX
SP07SE-XX-XXX
MS3124E-XX-XXX
“SE” (SR), MS / “F” Strain Relief
PT07SE-XX-XXX (SR)
SP07SE-XX-XXX (SR)
MS3124F-XX-XXX
“SP”, MS / “P” Potting Boot
PT07SP-XX-XXX
SP07SP-XX-XXX
MS3124P-XX-XXX
All dimensions for ref erence only.
Shell
Size
Receptacle Front
View Receptacle Side View
H Hex
Max. S
Max.
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010 M
±.005
P
Panel Thickness R
Thread
Class 2AMin. Max.
8 .767 .954 .473 .530 .125 .696 .062 .125 .5625-24 UNEF
10 .892 1.078 .590 .655 .125 .696 .062 .125 .6875-24 NEF
12 1.079 1.266 .750 .818 .125 .696 .062 .125 .8750-20 UNEF
14 1.205 1.391 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF
16 1.329 1.516 1.000 1.066 .125 .69 6 .062 .125 1.1250-18 NEF
18 1.455 1.641 1.125 1.191 .125 .69 6 .062 .125 1.2500-18 NEF
20 1.579 1.828 1.250 1.316 .156 .88 4 .062 .250 1.3750-18 NEF
22 1.705 1.954 1.375 1.441 .156 .88 4 .062 .250 1.5000-18 NEF
24 1.829 2.078 1.500 1.566 .156 .91 7 .062 .250 1.6250-18 NEF
Shell
Size
Class “SE”, MS / “E Class “SE” (SR), MS / “F” Class “SP”, MS /”P”
L
Max. N
Max. F
Min. G Dia.
Free L
Max. N
Max. G
Dia. L
Max. N Dia.
Max.
8 1.438 .749 .234 .125 1.922 .828
10 1.438 .874 .297 .188 1.922 .891 .444 1.656 .734
12 1.438 .999 .422 .312 1.922 1.016 .558 1.656 .858
14 1.438 1.124 .547 .375 1.922 1.141 .683 1.656 .984
16 1.438 1.249 .609 .500 2.000 1.203 .808 1.656 1.110
18 1.438 1.374 .734 .625 2.000 1.469 .909 1.656 1.234
20 1.625 1.530 .734 .625 2.172 1.469 1.034 1.922 1.360
22 1.625 1.655 .922 .750 2.172 1.656 1.159 1.922 1.484
24 1.688 1.780 .984 .800 2.234 1.750 1.284 1.951 1.610
PT07 SE (MS3124)
SP07 SE
jam nut receptacle
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
S
H
S
JN
A
M
K
P
R
L
JNF
A
M
R
P
K
L
JNG
A
R
M
L
P
K
37
D
C
B
E
L
A
H
K
L
TERMINATION ASSEMBLIES
“SE” Open Wire Seal, “SE” (SR) Strain Relief
PT08SE-XX-XXX
SP08SE-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR)
“SP” Potting Boot 75 degrees
PT08SP-XX-XXX
SP08SP-XX-XXX
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
All dimensions for reference only.
Shell
Size
Plug
Front View Plug
Side View
G
Dia.
Max.
Class “SE”, “SE” (SR) Class “SP”
B
±.031
C
+.010
–.025 D
±.062
E
+.047
–.025 L
Max. A
±.025 H
±.015 K
±.015 L
Max.
10 .921 .749 .170 1.191 .393 2.137 .547 .438 .562 2.031
12 1.046 .812 .264 1.191 .450 2.222 .625 .516 .688 2.093
14 1.171 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203
16 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250
18 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296
20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343
22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390
24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624
PT08 SE
SP08 SE
90 degree plug
G
38
Breakaway PT-SE with Crimp Contacts,
Potted Termination
71-4196XX-( )
72-4196XX-( )
Breakaway PT-SE with Crimp Contacts,
Environmental with Strain Relief
71-2511XX-( )
72-2511XX-( )
Breakaway PT-SE with Crimp Contacts,
Environmental
71-3455XX-( )
72-3455XX-( )
PT-SE Breakaway
twist pull plug
Part
Number* Part
Number* Part
Number* Shell
Size A Dia.
Max. B
Max. C +.020
–.000 D +.0 20
–.000 F Dia.
±.016 H Dia.
±.016 J
±.010 L
Max. L1
Max. L2
Max.
71-419646 71-251181 71-345510 10 1.125 1.125 .030 .337 .188 .444 .353 1.875 2.140 2.156
71-419647 71-251182 71-345512 12 1.281 1.406 .030 .337 .312 .558 .353 1.875 2.156 2.406
71-419648 71-251183 71-345514 14 1.438 1.562 .030 .337 .375 .683 .353 1.906 2.203 2.406
71-419649 71-251184 71-345516 16 1.562 1.688 .030 .337 .500 .808 .353 1.969 2.250 2.531
71-419650 71-251185 71-345518 18 1.718 1.844 .030 .337 .625 .909 .353 2.000 2.281 2.531
71-419651 71-251186 71-345520 20 1.875 2.000 .092 .399 .625 1.034 .415 2.281 2.359 2.719
71-419652 71-251187 71-345522 22 2.031 2.188 .092 .399 .750 1.159 .415 2.344 2.453 2.844
71-419653 71-251188 71-345524 24 2.156 2.312 .092 .399 .800 1.284 .415 2.406 2.453 2.906
All dimensio ns for reference only.
* See Finish information below to determine prefix 71 or 72 in part number. Drawing above shows standard lanyard length.
The PT-SE m i ni at ur e br eak aw ay conne ctor has the following
design features:
cr imp front release, front removable contacts in “SE” spring
tower re te nt io n sy st em
3 st yl es availabl e: pot t ed t er m in at i on, environm ental style
and envi ron m ent style wit h a strain relief
instant decoupling of plug and receptacle with an axial
pull on the lanyard when they are fully ma te d
in t er m at eable with sta nda rd receptacl es
operating voltage to 900 VAC (RMS) at sea level
quick positive bayon et coup l in g and 5 key/key w ay polarizati on
Order by Amphenol Propriety number as follows (example part number shown):
71 - 4196 50 - 32 P
12345
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
4196XX designates PT-SE plug, crimp, potted termination style
2511XX designates PT-SE plug, crimp, environmental with strain relief style
3455XX designates PT-SE plug, crimp, environmental
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number.
Pin Contacts Socket Contacts
Amphenol
Letter Equates t o
MS letter Amphenol
Letter Equa tes to
MS letter
GPWHSW
IPXJSX
KPYLSY
M
PZ
SZ
5. Contact Type/Alternate Insert Rotation
P designates pin, S designates socket for normal positioning of inserts. When an
alternate position of the insert is required to prevent cross-mating a different letter
(other than P or S) is used. See page 7 for description of alternate positions; then con-
vert to Amphenol proprietary coding by the chart at right to complete the part number.
C
PIN
INSERT
LANYARD PULLED TAUT
AGAINST A .200 ±.031 DIA MANDREL
D
4.500
J
SOCKET
INSERT
±.250 L
C
PIN
INSERT
D
4.500
J
SOCKET
INSERT
±.250 L1
H
C
PIN
INSERT
D
5.000
J
SOCKET
INSERT
±.250 L2
F
B
A
39
PT-SE, SP-SE
To more easily illustrate ordering procedure, part number PT00SE-20-
41PW(SR) is shown as follows:
PT 00 SE - 20 - 41 P W (SR)
1 2345678
See code below:
1. Connector Type
“PT” designates standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with crimp contacts
“MF” designates standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with dual mounting holes, and
crimp contacts
“SP” designates electrically non-conductive, hard anodic coated,
bayonet lock connector with larger flange and mounting holes
for back panel mounting, and crimp contacts
“PTG” designates plug with grounding fingers
2. Shell Style
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle*
“02” designates box mounting receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90 degree plug
3. Service Classes
“SE” designates environmental crimp
“SP” designates potted type crimp
Both of the above are Amphenol proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 15 lbs. contact reten-
tion for size 20 contacts; 25 lbs. for size 16 contacts.
4. Shell Size
“20” designates shell size. Shell sizes 8 through 24 available.
5. Insert Ar rangeme n t
Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts
“S” designates socket contacts
7. Inse r t R o tatio n
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal”
position. No letter required for normal (no rotation) position.
8. “SR ” designates a strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) elect roless nickel
(024) olive drab zinc cobalt plating
(424) elect roless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
OR
RoHS Compliant finish suffix as follow:
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(470) non-conductive black zinc cobalt plating with
strain relief
(476) conductive black zinc cobalt with strain relief
MS/PT-SE
MIL-C-26482, Series 1
To more easily illustrate ordering procedure, part number
MS3120E20-41PW is shown as follows:
MS 312 0 E 20 41 P W
1 2345678
See code below:
1. “MS” designat es Military Standard
2. Specification Number
“312” designates basic family for MIL-C-26482, Series 1
crimp type
3. Shell Style
“0” designates wall mounting receptacle
“1” designates cable connecting receptacle*
“2” designates box mounting receptacle
“4” designates jam nut receptacle
“6” designates straight plug
“7” designates box mounting receptacle with dual
mounting holes
“8” designates wall mounting receptacle with dual
mounting holes
4. Service Class
“E” designat es environm ental resisting connector
“F” designates environm ental resisting connector with
strain relief
“P” designat es potted type with potting boot
5. Shell Size
“20” designates shell size. Shell sizes 8 through 24 available
6. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number follow-
ing the hyphen is the number only that is used in the part
number).
7. Contacts
“P” designates pin contacts
“S” designates socket contacts
8. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from the “normal” position. No letter required for normal (no
rotation) position.
* This connector style is sometimes referred to as a cable connecting
“plug”. It does, however, mate with either a straight or 90 degree plug.
For ordering Miniature Breakaway PT-SE Crimp connectors
see pg. 38 .
PT-SE, SP-SE, MS/PT-SE
how to order
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
HOW TO ORDER
PT-S E, SP -S E, MS/PT -S E
40
Amphenol PT-CE, SP-CE
bayonet coupling, crimp termination
Amphenol® CE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by a nylon wafer retention system.
The SP-CE Series is a modification of the PT-CE, providing
special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium
plate w ith an oliv e drab ch romate after-trea tment i s used on th e
PT-CE. The SP-CE is given a durable nonconductive hard
anodic “Alu milite”® coating which provides abrasion protection
and resistance to corrosion.
Shell components for these versions are aluminum. The
dependable 5 key/keyway polarization with bayonet lock cou-
pling assures p osi tiv e mating with no c han ce of c r os s pl ugg ing .
Spring tension provided by a wave washer in the coupling nut
ensures ma intenance of interfa cial s ea l between m ati ng h alv es .
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined form a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Breakaway style plug is available in PT-CE crimp.
The PT-CE and SP-CE Series are intermateable and inter-
mountable with all existing Miniature Cylindrical Series connec-
tors except for the threaded coupling PC Series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug.” It
does, however, mate with a straight or 90 degree plug.
®
wall mounting
receptacle
cable
connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
breakaway
twist pull
plug
41
“CE”
open wire seal
“CE” (SR)
strain relief
“CP”
potting boot
PT-CE, SP-CE
Silver plated wire per MIL-C-26482
PT-CE, and SP-CE Service Classes
PT-CE and SP-CE Connectors are available in the
three service classes listed below.
“CE” Open wire s eal in g – env iro nm ent al res ist an t,
with a nut and grommet for moisture proof-
ing individual wires.
“CE” (SR)Strain relief clamp – environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support.
“CP” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
Breakaway style - se e page 48.
Contact Specifications
Contact
Size Test
Current
Maximum
Millivolt
Drop† Cr imp Well
Diameter Minimum
Well Depth
20 7.5 55 .045 .359
16 13.0 49 .063 .234
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000
ft. 70,000
ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
+.002
–.001
+.004
–.001
BAYONET COUPLING
WITH CRIMP CONTACTS
PT-CE, SP-CE
42
TERMINATION ASSEMBLIES
“CE” Open Wire Seal
PT00CE-XX-XXX
SP00CE-XX-XXX
“CE” (SR) Strain Relief
PT00CE-XX-XXX (SR)
SP00CE-XX-XXX (SR)
“CP” Potting Boot
PT00CP-XX-XXX
SP00CP-XX-XXX
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S
±.016
A
Dia.
+.001
–.005
K
+.025
–.010
M
+.010
–.000
Class “CE” Class “CE” (SR) Class “CP”
L
Max.
N
Dia.
Max. G
Dia. H
Max. L
Max. D
Dia. L
Max.
N
Dia.
Max.PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .431 .462 1.468 .440
8 .594 .734 .812 1.047 .473 .493 .524 .431 .462 1.468 .560 .125 .797 2.031 .327 1.683 .608
10 .719 .812 .938 1.125 .590 .493 .524 .431 .462 1.468 .685 .188 .859 2.031 .444 1.683 .734
12 .812 .938 1.031 1.250 .750 .493 .524 .431 .462 1.468 .813 .312 .984 2.031 .558 1.683 .858
14 .906 1.031 1.125 1.344 .875 .493 .524 .431 .462 1.468 .930 .375 1.109 2.031 .683 1.683 .984
16 .969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156 .808 1.683 1.110
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156 .909 1.683 1.234
20 1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034 1.750 1.360
22 1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159 1.750 1.484
24 1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284 1.782 1.610
PT00 CE
SP00 CE
wall mounting receptacle
To complete part number see how to order on page 49.
(MMC) located within .005 Dia. of (TP)
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
4 Holes
M
K
N
A
L
AGH
K
M
L
AD
L
K
M
N
43
TERMINATION ASSEMBLIES
“CE” Open Wire Seal
PT01CE-XX-XXX
SP01CE-XX-XXX
“CE” (SR) Strain Relief
PT01CE-XX-XXX (SR)
SP01CE-XX-XXX (SR)
“CP” Potting Boot
PT01CP-XX-XXX
All dimensio ns f or ref ere nce only .
Shell
Size
Receptacle
Front View Receptacle
Side View
S
±.016
A Dia.
+.001
–.005 K
±.016
Class “CE” Cla ss “CE ” (SR) C las s “CP”
L
Max. N
Dia. G
Dia. H
Dia. L
Max. D Dia.
Min. L
Max. N Dia.
Max.
6 .688 .348 .094 1.468 .440
8 .812 .473 .094 1.468 .560 .125 .797 1.982 .327 1.702 .608
10 .938 .590 .094 1.468 .685 .188 .859 1.982 .444 1.702 .734
12 1.031 .750 .094 1.468 .813 .312 .984 1.982 .558 1.702 .858
14 1.125 .875 .094 1.468 .930 .375 1.109 1.982 .683 1.702 .984
16 1.219 1.000 .094 1.468 1.057 .500 1.172 2.114 .808 1.702 1.110
18 1.312 1.125 .094 1.468 1.175 .625 1.422 2.114 .909 1.702 1.234
20 1.438 1.250 .115 1.562 1.301 .625 1.422 2.207 1.034 1.796 1.360
22 1.562 1.375 .115 1.562 1.428 .750 1.609 2.207 1.159 1.796 1.484
24 1.688 1.500 .115 1.625 1.555 .800 1.703 2.219 1.284 1.827 1.610
PT01 CE
cable connecting receptacle
Note:This connector style is sometimes referred to as a cable connecting
“plug”. It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 49.
S
S
K
N
A
L
AGH
L
AD
L
H
K K
44
PT02CE-XX-XXX
SP02CE-XX-XXX
PT02CP-XX-XXX
SP02CP-XX-XXX
To complete part number see how to order on page 49.
(MMC) located within .005 of (TP)
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
RS
±.016
T
Dia.
±.005
A
Dia
+.001
–.005
DH
Dia.
Max.
K
+.025
–.010 L
Max.
M
+.010
–.000 N
Dia.
Max.PT SP PT SP PT SP PT SP PT SP PT SP
8 .594 .734 .812 1.047 .120 .150 .473 .344 .312 .317 .493 .524 1.250 .431 .462 .449
10 .719 .812 .938 1.125 .120 .150 .590 .344 .312 .441 .493 .524 1.250 .431 .462 .573
12 .812 .938 1.031 1.250 .120 .150 .750 .344 .312 .566 .493 .524 1.250 .431 .462 .699
14 .906 1.031 1.125 1.344 .120 .150 .875 .344 .312 .683 .493 .524 1.250 .431 .462 .823
16 .969 1.125 1.219 1.438 .120 .150 1.000 .344 .312 .808 .493 .524 1.250 .431 .462 .949
18 1.062 1.203 1.312 1.516 .120 .150 1.125 .344 .312 .899 .493 .524 1.250 .431 .462 1.073
20 1.156 1.297 1.438 1.672 .120 .150 1.250 .406 .406 1.034 .650 .650 1.312 .556 .556 1.199
22 1.250 1.375 1.562 1.750 .120 .150 1.375 .406 .406 1.155 .650 .650 1.312 .556 .556 1.323
24 1.375 1.500 1.688 1.875 .147 .150 1.500 .436 .436 1.279 .683 .683 1.312 .589 .589 1.449
PT02 CE
SP02 CE
box mounting receptacle
S
S
R
(TP)
R
(TP)
T Dia.
4 Holes
L
K
M
ANH
D
45
TERMINATION ASSEMBLIES
“CE” Open Wire Seal
PT06CE-XX-XXX
SP06CE-XX-XXX
“CE” (SR) Strain Relief
PT06CE-XX-XXX (SR)
SP06CE-XX-XXX (SR)
“CP” Potting Boot
PT06CP-XX-XXX
SP06CP-XX-XXX
All dimensio ns f or ref ere nce only .
Shell
Size
Plug
Front View Plug
Side View
S
Dia.
Max.
Z
+.035
–.040
Z1
+.035
–.040
Class “CE” Class “CE” (SR) Class “CP”
L
Max. N
Dia. G
Dia. H
Max. L
Max. D
Dia. L
Max. N Dia.
Max.
6.609.772.6311.457.440––––––
8 .734 .772 .631 1.457 .560 .125 .797 2.019 .327 1.707 .608
10 .844 .772 .631 1.457 .685 .188 .859 2.019 .444 1.707 .734
12 1.016 .772 .631 1.457 .813 .312 .984 2.019 .558 1.707 .858
14 1.141 .772 .631 1.457 .930 .375 1.109 2.019 .683 1.707 .984
16 1.266 .772 .631 1.457 1.057 .500 1.172 2.144 .808 1.707 1.110
18 1.375 .772 .631 1.457 1.175 .625 1.422 2.144 .909 1.707 1.234
20 1.516 .710 .569 1.487 1.301 .625 1.422 2.175 1.034 1.707 1.360
22 1.641 .710 .569 1.487 1.428 .750 1.609 2.175 1.159 1.707 1.484
24 1.761 .710 .569 1.550 1.555 .800 1.703 2.237 1.284 1.832 1.610
PT06 CE
SP06 CE
straight plug
To complete part number see how to order on page 49.
S
L
N
Z pin contacts
Z¹ socket contacts
L
NG
Z pin contacts
Z¹ socket contacts
L
ND
Z pin contacts
Z¹ socket contacts
46
TERMINATION ASSEMBLIES
“CE” Open Wire Seal
PT07CE-XX-XXX
SP07CE-XX-XXX
“CE” (SR) Strain Relief
PT07CE-XX-XXX (SR)
SP07CE-XX-XXX (SR)
“CP” Potting Boot
PT07CP-XX-XX
SP07CP-XX-XXX
All dimensio ns for reference only.
Shell
Size
Receptacle
Front View Receptacle
Side View
H
Hex.
+.017
–.016 S
±.016
A
Dia.
+.001
–.005
J
Flat
+.000
–.010 K
±.016 M
±.005
Panel Thickness Class “CE” Class “CE” (SR) Class “CP”
Min. Max. L
Max. N
Max. G
Dia. L
Max. N
Max.
D
Dia.
Min. L
Max.
N
Dia.
Max.
8 .750 .938 .473 .530 .125 .696 .062 .125 .827 .730 .125 1.297 .797 .327 .875 .608
10 .875 1.062 .590 .655 .125 .696 .062 .125 .827 .855 .188 1.297 .859 .444 .875 .734
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .827 .980 .312 1.297 .984 .558 .875 .858
14 1.188 1.375 .875 .942 .125 .696 .062 .125 .827 1.105 .375 1.297 1.109 .683 .875 .984
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 .827 1.230 .500 1.422 1.172 .808 .875 1.110
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 .827 1.355 .625 1.422 1.422 .909 .875 1.234
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 .733 1.511 .625 1.328 1.422 1.034 .969 1.360
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 .733 1.636 .750 1.328 1.609 1.159 .969 1.484
24 1.812 2.062 1.500 1.566 .156 .917 .062 .250 .762 1.761 .800 1.422 1.703 1.284 .969 1.610
PT07 CE
SP07 CE
jam nut receptacle
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
S
H
S
JN
A
M
K
R
P
L
JNG
A
M
R
P
K
L
JND
A
R
ML
P
K
47
D
C
B
E
L
A
H
K
L
PT08 CE
SP08 CE
90 degree plug
TERMINATION ASSEMBLIES
“CE” Open Wire Seal, “CE” (SR) Strain Relief
PT08CE-XX-XXX
SP08CE-XX-XXX
PT08CE-XX-XXX (SR)
SP08CE-XX-XXX (SR)
“CP” Potting Boot 75°
PT08CP-XX-XXX
SP08CP-XX-XXX
All dimensio ns for reference only.
Shell
Size
Plug
Front View Plug
Side View
G
Dia.
Max.
Class “CE”, “CE” (SR) Class “CP”
B
±.031
C
+.010
–.025 D
±.062
E
+.047
–.025 L
±.057 A
±.025 H
±.015 K
±.015 L
Max.
8 .796 .655 .169 .941 .339 1.986 .469 .312 .438 1.906
10 .921 .749 .170 1.191 .393 2.080 .547 .438 .562 2.031
12 1.046 .812 .264 1.191 .450 2.165 .625 .516 .688 2.093
14 1.171 .905 .310 1.254 .519 2.313 .734 .625 .781 2.203
16 1.297 1.030 .330 1.316 .583 2.515 .750 .656 .890 2.250
18 1.422 1.015 .444 1.562 .621 2.623 .781 .703 1.000 2.296
20 1.562 1.077 .510 1.625 .683 2.739 .859 .766 1.125 2.343
22 1.672 1.139 .515 1.719 .739 2.785 .906 .812 1.234 2.390
24 1.797 1.265 .656 1.751 .797 3.024 1.169 .918 1.374 2.624
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
G
48
Breakaway PT-CE with Crimp Contacts,
Potted Termination
71-2512XX-( )
72-2512XX-( )
PT-CE Breakaway
twist pull plug
All dimensio ns for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing abo ve shows standard lanya rd leng th.
Part
Number* Part
Number* Shell
Size
A
Dia.
Max. B
Max.
F
Dia.
±.016
H
Dia.
±.016 J
±.010 L
Max. L1
Max.
71-251209 71-339508 8 .875 .984 .125 .327 .353 1.937 2.937
71-251210 71-339510 10 1.125 1.125 .188 .444 .353 1.890 2.937
71-251211 71-339512 12 1.281 1.406 .312 .558 .353 1.906 3.000
71-251212 71-339514 14 1.438 1.562 .375 .683 .353 1.953 3.000
71-251213 71-339516 16 1.562 1.688 .500 .808 .353 2.000 3.187
71-251214 71-339518 18 1.718 1.844 .625 .909 .353 2.031 3.375
71-251215 71-339520 20 1.875 2.000 .625 1.034 .415 2.234 3.375
71-251216 71-339522 22 2.031 2.188 .750 1.159 .415 2.328 3.375
71-251217 71-339524 24 2.156 2.312 .800 1.284 .415 2.359 3.625
The PT-C E m in iat ur e br eakaway co nnector has the
followi ng de si gn features:
crimp front release, front removable contacts in
“CE” nyl on w a fe r re t ent ion system
2 styles available: potted termination and environ-
ment styl e with a str ai n relief
in st ant decoupli ng of plug and receptacle with an
axial pul l on th e la nyard when th ey ar e f ull y
mated
in t er m at eable with sta nda rd receptacl es
operating voltage to 900 VAC (RMS) at sea level
quick positive bayon et coup l in g and 5 key/key -
way polarization
Order by Amphenol Propriety number as follows (example part number shown):
71 - 2512 50 - 32 P
12345
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
2512XX designates PT-CE plug, crimp, potted termination style
3395XX designates PT-CE plug, crimp, environmental with strain relief style
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
Pin Contacts Socke t Contacts
Amphenol
Letter Equate s to
MS letter Amphenol
Letter Equate s to
MS letter
GPWHSW
IPXJSX
KPYLSY
MPZNSZ
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number
following the hyphen is the insert arrangement number.
5. Contact Type/Alternate Insert Rotation
P designates pin, S designates socket for normal positioning of inserts. When an
alternate position of the insert is required to prevent cross-mating a different letter
(other than P or S) is used. See page 7 for description of alternate positions; then
convert to Amphenol proprietary coding by the chart at right to complete the part
number.
Breakaway PT-CE with Crimp Contacts,
Environmental with Strain Relief
71-3395XX-( )
72-3395XX-( )
.328
PIN
INSERT
± .250
+.010
–.025
.016
6.000
J
SOCKET INSERT
+.010
–.025
L
1
F
.328
PIN INSERT
LANYARD PULLED TAUT
AGAINST A .200 ± .031 DIA. MANDREL
± .250
+.010
–.025
.016
6.000
J
H
SOCKET INSERT
+.010
–.025
L
B
A
49
PT-CE, SP-CE
To more easily illustrate ordering procedure, part number
PT00CE-20-41PW (SR) is shown as follows:
PT 00 CE 20 41 P W (SR)
1234567 8
See code below:
1. Connector Type
“PT” designates standard electrically conductive oli ve drab cadmium plated
bayonet lock connector with crimp contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet
lock connector with large flange and mounting holes for back panel mount-
ing, and crimp contacts.
2. Shell Style
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle*
“02” designates box mounting receptacle
“06” designates straight plug
“07” designates jam nut receptacle
“08” designates 90° plug
3. Service Class
“CE” designates environm ental crimp
“CP” designates potted type crimp
Both of the above are Amphenol® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact retention
for size 20 contacts; 9 lbs for size 16 contacts.
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Ar rangeme n t
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Inse r t R o tatio n
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designate s strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) elect roless nickel
(024) olive drab zinc cobalt plating
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(424) elect roless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(470) non-conductive black zinc cobalt plating with strain relief
(476) conductive black zinc cobalt with strain relief
* This connector style is sometime s referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
For ordering Mi niature Bre akaway P T-CE Crimp con nectors see page 48.
PT-CE, SP-CE
how to order
HOW TO ORDER
PT-CE, SP-CE
50
Amphen ol PC
threaded coupling and solder termination
®
wall mounting
receptacle
cable
connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
Amphenol® PC Series threaded coupling miniature cylin-
drical connecto rs incorporate solder contacts . The PC d ou-
ble stub threaded coupling system cannot be cross
threade d, and is mec hanically as sisted whi le engaging a nd
disengaging.
Shell components are aluminum. Bright cadmium plating to
QQ-P-416 with a clear chromate after-treatment provides a
golden colored conductive finish. Single key/keyway polariza-
tion represents maximum simplicity in a design proven in mil-
lions of AN connectors.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical insulation of the contacts in the
insert.
The PC is intermateable and intermountable within the PC
threaded coupling series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
PC-SE and PC-CE, which are threaded coupling and incorporate crimp
contacts, are briefly covered on pages 62 and 63. It is necessary to
contact Amphenol for ordering information on these types.
51
PC
† Silver plated wire per MIL-C-26482
PC Service Classe s
PC connectors are available in the service classes
listed below. Each class except the hermetic seal
receptacle has one or more means of terminating or
supporting a cable or wire bundle.
“A” General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp.
“A” (SR) General duty; with strain relief clamp for
cable or wire bundle support.
“C” Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F in accor-
dance with BSC-C1P specification.
“E” Environment resistant; with nut and grom-
met for moisture proofing individual wires.
“E” (SR) Environment resi stant strain rel ief c lamp an d
grommet for moisture proofing individual
wires; provides added wire bundle support.
“P” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
“P” (SR) Strain relief clamp suitable for retaining cus-
tomer applied potting compounds, with pro-
vision for wire support.
“W” Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close down.
“H”* Hermetically sealed with compression glass
inserts.
Refer to pag es 57 -60 for Herm eti c Version s with in the
PC solder series.
Contact Specifications
Contact
Size Test
Current
Maximum
Millivolt
Drop† Solder Well
Diameter Solder
Well Depth
20 7.5 55 .046 .125
16 13.0 50 .078 .188
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000
ft. 70,000
ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
+.005
–.003
+.004
–.000 +.031
–.000
+.031
–.000
“A”
general duty
“E” (SR)
strain relief
“E” MS / “E”
open wire seal
“P”, MS / “P”
potting boot
“W”
cable seal
THREADED COUPLING
WITH SOLDER CONTACTS
PC SER IES
52
TERMINATION ASSEMBLIES
“A” General Duty/
“C” Pressurized
PC00A-XX-XXX
PC00C-XX-XXX
“A” (SR), “E” (SR), “P” (SR)
Strain Relief
PC00A-XX-XXX (SR)
PC00E-XX-XXX (SR)
“E” Open Wire Seal
PC00E-XX-XXX
“P” Potting Boot
PC00P-XX-XXX
“W” Cable Seal
PC00W-XX-XXX
All dimensio ns f or ref ere nce only .
Shell
Size
Receptacle
Front View Receptacle Side View
A
Thread
Class 2A K
Max. L
Max.
M
+.000
–.010
Q
Thread
Class 2A Z
Max.
Class “A”, “C”
R
±.005 S
±.010 D
Min. L
Max. N
Max.
V
Thread
Class 2A
6 .469 .688 .3750 DS .490 .875 .416 .3125-32 NEF .466 .175 1.528 .462 .3750-32 NEF
8 .594 .812 .5000 DS .490 .875 .416 .4375-28 UNEF .466 .297 1.528 .590 .5000-28 UNEF
10 .719 .938 .6250 DS .490 .875 .416 .5625-24 NEF .466 .421 1.528 .717 .6250-24 NEF
12 .812 1.031 .7500 DS .490 .875 .416 .6875-24 NEF .466 .546 1.528 .834 .7500-20 UNEF
14 .906 1.125 .8750 DS .490 .875 .416 .8125-20 UNEF .466 .663 1.528 .970 .8750-20 UNEF
16 .969 1.219 1.0000 DS .490 .875 .416 .9375-20 UNEF .466 .787 1.528 1.088 1.0000-20 UNEF
18 1.062 1.312 1.1250 DS .490 .875 .416 1.0625-18 UNEF .466 .879 1.528 1.216 1.1875-18 NEF
20 1.156 1.438 1.2500 DS .584 1.031 .479 1.1875-18 NEF .527 1.014 1.588 1.332 1.1875-18 NEF
22 1.250 1.562 1.3750 DS .584 1.031 .479 1.3125-18 NEF .527 1.135 1.588 1.460 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR) Class “E” Class “P” Class “W”
C
Thread D
Min. G
Dia. H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max.Closed Free
6––1.250.440.1921.406.484––––
8 6-32 .240 .125 .812 1.922 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547
10 6-32 .302 .188 .875 1.922 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675
12 6-32 .428 .312 1.000 1.922 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812
14 6-32 .552 .375 1.125 1.922 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940
16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067
18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194
20 8-32 .740 .625 1.438 2.344 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322
22 8-32 .928 .750 1.719 2.344 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449
PC00
wall mounting receptacle
To complete part number see how to order on page 61.
S
RS
R
.120 ± .005 Dia.
4 Holes AM
L
Q
ZK
ND
.375 MIN
V
L
G
L
C
NDH
L
NN
L
DND
L
53
All dimensio ns f or ref ere nce only .
Shell
Size
Recept.
Front View Receptacle
Side View
S
Max.
A
Thread
Class 2A L
Max.
Q
Thread
Class 2A Z
Max.
Class “E”
D
Min. L
Max. N
Max.
V
Thread
Class 2A
6 .442 .3750 DS .875 .3125-32 NEF .924 .175 1.518 .462 .3750- 32 NEF
8 .570 .5000 DS .875 .4375-28 UNEF .924 .297 1.518 .590 .5000- 28 UNEF
10 .697 .6250 DS .875 .5625-24 NEF .924 .421 1.518 .717 .6250- 24 NEF
12 .814 .7500 DS .875 .6875-24 NEF .924 .546 1.518 .834 .7500-20 UNEF
14 .950 .8750 DS .875 .8125-20 UNEF .924 .663 1.51 8 .970 .8750-20 UNEF
16 1.068 1.0000 DS .875 .9375-20 UNEF .924 .787 1.51 8 1.088 1.0000-20 UNEF
18 1.196 1.1250 DS .875 1.0625-18 NEF .924 .879 1.518 1.216 1.1875-18 NEF
20 1.312 1.2500 DS 1.031 1.1875-18 NEF 1.081 1.014 1.578 1.332 1.1875-18 NEF
22 1.440 1.3750 DS 1.031 1.3125-18 NEF 1.081 1.135 1.578 1.460 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR) Class “E” Class “P” Class “W”
C
Thread D
Min. G
Dia. H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max.Closed Free
6 1.250 .440 .192 1.406 .484
8 6-32 .240 .125 .812 1.922 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547
10 6-32 .302 .188 .875 1.922 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675
12 6-32 .428 .312 1.000 1.922 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812
14 6-32 .552 .375 1.125 1.922 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940
16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067
18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194
20 8-32 .740 .625 1.438 2.344 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322
22 8-32 .928 .750 1.719 2.344 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449
PC01
cable connecting receptacle
TERMINATION ASSEMBLIES
“A” General Duty
PC01A-XX-XXX
“A” (SR), “E” (SR), “P” (SR)
Strain Relief
PC01A-XX-XXX (SR)
PC01E-XX-X XX (SR)
PC01P-XX-X XX (SR)
“E” Open Wire Seal
PC01E-XX-XXX
“P” Potting Boot
PC01P-XX-XXX
“W” Cable Seal
PC01W-XX-XXX
Note:This c onnector style is some times referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 61.
SA
L
Z
Q
ND
.375 MIN
V
L
G
L
C
NDH
L
NN
L
DND
L
54
PC02
box mounting receptacle
PC02A-XX-XXX
* PC02C-XX-XXX
* PC02E-XX-XXX
* PC02P-XX-XXX
All dimensions f or reference only.
Shell
Size
Receptacle
Front View Receptacle
Side View
R
±.005 S
±.010
A
Thread
Class 2A
K
+.020
–.010 L
Max.
M
+.010
–.000 N
Max. Z
Max.
6 .469 . 688 .3750 DS .469 .801 .406 .323 .466
8 .594 . 812 .5000 DS .469 .801 .406 .449 .466
10 .719 .938 .6250 DS .469 .801 .406 .573 .466
12 .812 1. 031 .7500 DS .469 .801 .406 .699 .466
14 .906 1. 125 .8750 DS .469 .801 .406 .823 .466
16 .969 1.219 1.0000 DS .469 .801 .406 .949 .466
18 1.062 1.312 1.1250 DS .469 .801 .406 1.073 .466
20 1.156 1.438 1.2500 DS .562 .988 .469 1.199 .527
22 1.250 1.562 1.3750 DS .562 .988 .469 1.323 .527
To comple te par t numb er see how to ord er on pag e 61.
* The PC02 Box Mounting Receptacle is made only to complete a series and no provision
is made for accesso ries or pot ti ng on the rear skirt.
S
RS
R
.120 ± .005 Dia.
4 Holes AM
L
Z
N
K
55
PC06
straight plug
TERMINATION ASSEMBLIES
“A” General Duty
PC06A-XX-XXX
“A” (SR), “E” (SR), “P” (SR) Strain Relief
PC06A-XX-XXX (SR)
PC06E-XX-XXX (SR)
PC06P-XX-XXX (SR)
“E” Open Wire Seal
PC06E-XX-XXX
“P” Potting Boot
PC06P-XX-XXX
“W” Cable Seal
PC06W-XX-XXX
Shell
Size
Plug Front
View Plug
Side View
S
Max.
A
Thread
Class 2B L
Max.
Q
Thread
Class 2A Z
Max.
Class “A”
D
Min. L
Max. N
Max.
V
Thread
Class 2A
6 .604 .3750 DS .875 .3125-32 NEF .627 .175 1.534 .462 .3750-32 NEF
8 .729 .5000 DS .875 .4375-28 UNEF .627 .297 1.534 .590 .5000-28 UNEF
10 .854 .6250 DS .875 .5625-24 NEF .627 .421 1.534 .717 .6250-24 NEF
12 .979 .7500 DS .875 .6875-24 NEF .627 .546 1.534 .834 .7500-20 UNEF
14 1.104 .8750 DS .875 .8125-20 UNEF .627 .663 1.534 .972 .8750- 20 UNEF
16 1.229 1.0000 DS .875 .9375-20 UNEF .627 .787 1.534 1.088 1.0000-20 UNEF
18 1.354 1.1250 DS .875 1.0625-18 UNEF .627 .879 1.534 1.216 1.1875-18 NEF
20 1.478 1.2500 DS 1.031 1.1875-18 NEF .783 1.014 1.613 1.332 1.1875-18 NEF
22 1.604 1.3750 DS 1.031 1.3125-18 NEF .783 1.135 1.613 1.460 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR) Class “E” Class “P” Cla ss “W”
C
Thread D
Min. G
Dia. H
Max. L
Max. N
Max. L
Max. N
Max. D
Min. L
Max. N
Max. DL
Max. N
Max.Closed Free
6 1.250 .440 .192 1.406 .484
8 6-32 .240 .125 .812 1.906 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547
10 6-32 .302 .188 .875 1.906 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675
12 6-32 .428 .312 1.000 1.906 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812
14 6-32 .552 .375 1.125 1.906 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940
16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067
18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194
20 8-32 .740 .625 1.438 2.250 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322
22 8-32 .928 .750 1.719 2.250 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449
To complete part number see how to order on page 61.
All dimensio ns f or ref ere nce only
SA
.333 MAX
L
Z
Q
ND
.375 MIN
V
L
G
L
C
NDH
L
NN
L
DND
L
56
All dimensions for reference only
Shell
Size
Receptacle Front View Receptacle Side View
Class “A”, “C”
F
±.010
H
Hex
±.016 S
±.010
A
Thread
Class 2A
K
+.016
–.010 M
±.010
P
Panel Thickness R
Thread
Class 2A Z
Max.Min. Max.
6 .286 .625 .81 2 .3750 DS .125 .671 .062 .125 .4375-28 UNEF .232
8 .331 .750 .938 .5000 DS .125 .671 .062 .125 .5625-24 NEF .232
10 .375 .875 1.062 .6250 DS .125 .671 .062 .125 .6875-24 NEF .232
12 .442 1.062 1.250 .7500 DS .125 .671 .062 .12 5 .8750-20 UNEF .232
14 .486 1.188 1.375 .8750 DS .125 .671 .062 .125 1.0000- 20 UNEF .232
16 .530 1.312 1.500 1.0000 DS .125 .671 .062 .125 1.1250- 18 NEF .232
18 .573 1.438 1.625 1.1250 DS .125 .671 .062 .125 1.2500- 18 NEF .232
20 .641 1.562 1.812 1.2500 DS .156 .797 .062 .250 1.3750- 18 NEF .262
22 .685 1.688 1.938 1.3750 DS .156 .797 .062 .250 1.5000- 18 NEF .262
Shell
Size
Class “E” Class “A” (SR), “E” (SR) Class “P”
L
Max. N
Max. C
Thread G
Dia. H
Max. L
Max. P
Min. D
Min. L
Max. N
Max.
6 .692 .605 .192 .665 .484
8 .692 .730 6-32 .125 .812 1.096 .240 .317 .665 .608
10 .692 .855 6-32 .188 .875 1.096 .302 .434 .665 .734
12 .692 .980 6-32 .312 1.000 1.096 .428 .548 .665 .858
14 .692 1.105 6-32 .375 1.125 1.096 .552 .673 .665 .984
16 .692 1.230 6-32 .500 1.188 1.228 .651 .798 .665 1.110
18 .692 1.355 8-32 .625 1.438 1.228 .740 .899 .665 1.234
20 .754 1.511 8-32 .625 1.438 1.291 .740 1.024 .790 1.360
22 .754 1.636 8-32 .750 1.625 1.291 .928 1.149 .790 1.484
PC07
jam nut receptacle
“A” General Duty/
“C” Pressurized Receptacle
PC07A-XX-XXX
PC07C-XX-XXX
TERMINATION ASSEMBLIES
“E” Open Wire Seal
PC07E-XX-XXX
“A” (SR), “E” (SR) Strain Relief
PC07A-XX-XXX (SR)
PC07E-XX-XXX (SR)
“P” Potting Boot
PC07P-XX-XXX
To complete part number see how to order on page 61.
MZ
R
A
P
K
S
H
S
F
F
N
MZ
R
A
PL
MZ
R
A
PL
GDH ND
MZ
R
A
PL
57
solder
mounting
receptacle
box
mounting
receptacle
jam nut
receptacle
PC
hermetic
Three sh ell styles are availab le in the hermetic PC threa ded
series:
•PCIH
•PC02H
•PC07H
These hermetic connectors are available with solder cup or flat
eyelet pin contacts. Socket contacts are available in some ver-
sions. Other design characteristics of the PC hermetic connec-
tor series are as fol lows:
Shell Size: 6 thru 22. (tin plated)
Contact cou nt: 2 through 6 5. R efe r to pa ges 4 and 5 for insert
availability for hermetics.
Current: 5.0 amp, each #20 contact;
10 amp, each #16 contact;
17 amp, each #12 contact.
Contacts: Fabricated from high nickel alloy and tin plated.
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps Service Rating I;
2300 volts (RMS) 60 cps Service Rating II.
Compression glass inserts, permanently lettered.
Helium Leakage: Less than 1.0 X 10-6 cc /sec.
at 15 psi differential.
Physical Shock: 100 G’s.
Vibration: Exceeds MIL-E-5272 Procedure II.
Thermal Shock: No deterioration or failure after
5 cycles at –55°F to +257°F.
Refer to pages 4-11 for insert arrangement availability.
58
PC
I
H
hermetic solder mounting receptacle
*PCIH-XX-XXX
** PCIY-XX-XXX
All dimensions for reference only.
Shell
Size
Receptacle
Front View Receptacle
Side View
S
Dia.
Max.
A
Thread
Class 2A
L
+.025
–.016
N
Dia.
+.000
–.005
W
+.011
–.010 Z
Max.
6 .511 .3750 DS .422 .438 .094 .387
8 .636 .5000 DS .422 .562 .094 .387
10 .761 .6250 DS .422 .672 .094 .387
12 .855 .7500 DS .422 .781 .094 .387
14 .980 .8750 DS .422 .906 .094 .387
16 1.105 1.0000 DS .422 1.031 .094 .387
18 1.229 1.1250 DS .422 1.156 .094 .387
20 1.323 1.2500 DS .422 1.250 .094 .387
22 1.439 1.3750 DS .422 1.375 .125 .418
To comple te par t numb er see how to ord er on pag e 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
S
A
L
W
Z
.031 +.006
–.005
N
59
PC02H
hermetic box mounting receptacle
* PC02H-XX-XXX
** PC02Y-XX-XXX
All dimensions for reference only.
Shell
Size
Receptacle Front
View Receptacle Side View
R
±.005 S
±.010
A
Thread
Class 2A K
±.016
L
+.010
–.000
N
Dia.
+.000
–.005 T
±.010 Z
Max.
6 .469 .688 .3750 DS .047 .469 .438 .062 .344
8 .594 .812 .5000 DS .047 .469 .562 .062 .344
10 .719 .938 .6250 DS .047 .469 .672 .062 .344
12 .812 1.031 .7500 DS .047 .469 .781 .062 .344
14 .906 1.125 .8750 DS .047 .469 .906 .062 .344
16 .969 1.219 1.0000 DS .047 .469 1.031 .062 .344
18 1.062 1.312 1.1250 DS .047 .469 1.156 .062 .344
20 1.156 1.438 1.2500 DS .047 .469 1.250 .062 .344
22 1.250 1.562 1.3750 DS .078 .469 1.375 .062 .377
To comple te par t numb er see how to ord er on pag e 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
RS
R
S.120 ± .005 Dia.
4 Holes A
L
K
Z
T
N
60
PC07H
hermetic jam nut receptacle
* PC07H-XX-XXX
** PC07Y-XX-XXX
All dimensio ns for reference only.
Shell
Size
Receptacle Front View Receptacle Side View
F
+.010
H
Hex.
±.016 S
+.010
A
Thread
Class 2A
K
+.000
–.016 M
±.020
Panel
Thickness R
Thread
Class 2A Z
+.010Min Max.
6 .286 .625 .812 .3750 DS .094 .671 .062 .125 .4375-28 UNEF .129
8 .331 .750 .938 .5000 DS .094 .671 .062 .125 .562 5-24 NEF .129
10 .375 .875 1.062 .6250 DS .094 . 671 .062 .125 .6875-24 NEF .129
12 .442 1.062 1.250 .7500 DS .094 .671 .062 .12 5 .8750-20 UNEF .129
14 .486 1.188 1.375 .8750 DS .094 .671 .062 .125 1.0000-20 UNEF .129
16 .530 1.312 1.500 1.0000 DS .094 .671 .062 .125 1.1250-18 NEF .129
18 .573 1.438 1.625 1.1250 DS .094 .671 .062 .125 1.2500-18 NEF .129
20 .641 1.562 1.812 1.2500 DS .125 .797 .062 .250 1.3750-18 NEF .034
22 .685 1.688 1.938 1.3750 DS .125 .797 .062 .250 1.5000-18 NEF .034
To complete part number see how to order on page 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
S
H
S
F
F
M
Z
R
A
P
K
61
PC
To more e asil y i llus t ra te ord er in g pr oc edure, part nu m ber
PC00A-20-41PW (SR) is shown as fo llow s:
PC 00 A 20 41 P W (SR)
1234567 8
See code bel ow :
1. Connector Type
“PC” designates bright cadmium plated with clear chromate after treat-
ment, threaded coupling connector with solder contacts
2. Shell Style
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle
“02” designates box mounting receptacle
“06” designates straight plug
“07” designates jam nut receptacle
I designates solder-mount receptacle (herm etic only)
3. Service Class
“A” designates general duty back shell
“C” designates pressurized recept acle
“E” designates environmental resisting open wire seal with
grommet and nut
“P” designates potted with potting boot
“W” designates clamp assembly for mo isture proofing, multi-
jacketed cables
“H” designates hermetic* seal (without interfacial seal)
“Y” designates hermetic* seal (with interfacial seal)
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Ar rangeme n t
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Inse r t R o tatio n
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designate s strain relief clamp.
Indicate optional finishes as follows:
(001) bright cadm ium (standard on “PC”)
(003) olive drab cadmium plate
(005) anodic coating - Alumilite®
(011) chromate treated (Iridite 14-2)
(014) olive drab cadmium plate over nickel
(023) elect roless nickel
* Hermetic connectors are supplied with tin plated shells.
This connector style is some times referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
PC
how to order
HOW TO ORDER
PC SER IES
62
Amphenol PC-SE, PC-CE
threaded coupling and crimp termination
Amphenol® PC-SE Series threaded coupling miniature cylindri-
cal connectors incorporate crimp contacts in a spring tower
retention system.
Amphenol® PC-CE Series threaded coupling miniature cylindri-
cal connectors incorporate crimp contacts in a nylon wafer
retention system to maintain contact position.
The PC double stub threaded coupling system cannot be cross
threaded, and is mechanically assisted while engaging and dis-
engaging.
Shell components are aluminum. Bright cadmium plating to QQ-P-
416 with a clear chromate after-treatment provides a golden colored
conductive finish. Single key/keyway polarization represents maxi-
mum simplicity in a design proven in millions of AN connectors.
Both pins and so ckets are mac hined from a copp er allo y an d are gol d
plated. This gold plating eliminates contact corrosion and offers an
indefin ite shelf life. Sock et contac ts for thes e series ar e a closed entry
design.
Both the insert and main joint gasket are molded from resilient neo-
prene. This provides excellent moisture sealing at the gasket and
superior electrical insulation of the contacts in the insert.
The PC-SE and PC-CE are only intermateable and intermountable
within the PC threaded coupling series.
Shell sty le drawi ng page s are no t show n in thi s catalog for the PC-SE
and PC-CE styles. If connector drawings are needed please contact
Amphenol for assistance. Shell styles are currently available in these
series as follows :
PC00-SE, wall mounting receptacle
PC01-SE, cab le con ne cting rec epta cl e
PC02-SE, box mounting receptacle
PC06-SE, straight plug
PC08-SE , 90 degree plug
PC06-CE straight plug (will mate with PC-SE receptacles and PC
solder receptacles)
Please contact Amphenol for complete information, as there may be
limitations in shell sizes within the PC-SE and PC-CE series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometime s referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
®
PC-SE. PC-CE
† Silver plated wire per MIL-C-26482
PC-SE and PC-CE Service Classes
PC-SE and PC-CE connectors are available in the
three servic e classes listed below.
“SE” Open wire sealing - environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP” Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
Contact Specifications
Contact
Size Test
Current
Maximum
Millivolt
Drop† Crimp Well
Diameter Minimum
Well Depth
20 7.5 55 .04 9 ±.001 .267
16 13.0 49 .067 ±.001 .236
12 23.0 42 .100 ±.002 .236
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000
ft. 70,000
ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
“SE”
open wire seal
“SE” (SR)
strain relief
“SP”
potting boot
63
PC-SE, PC-CE
how to order
THREADED COUPLING
WITH CRIMP CONTACTS
PC-SE, PC-CE
PC-SE, PC - CE
To more e asil y i llus t ra te ord er in g pr oc edure, part nu m ber
PC-SE00A-20-41PW (SR) is shown as follows:
PC-SE 00 SP 20 41 P W (SR)
123 45678
See code bel ow :
1. Connector Type
“PC-SE” designates bright cadmium plated with clear chromate after
treatment, threaded coupling connector with crimp contacts, incorporat-
ing a spring tower retention system
“PC-CE” designates bright cadmium plated with clear chromate after
treatment, threaded coupkling connector with crimp contacts, incorpo-
rating a nylon waftr retention system to maintain contact postion
2. Shell Styles PC-SE - consult Amphenol for availability.
“00” designates wall mounting receptacle
“01” designates cable connecting receptacle
“02” designates box mounting receptacle
“06” designates straight plug
“08” designates 90 degree plug
2. Shell Style PC-CE - consult Amphenol for availability.
“06” designates straight plug
3. Service Class
“SE” designates environmental crimp
“SP” designates potted type crimp
Both of the above are Amphenol® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact reten-
tion for size 20 contacts; 9 lbs for size 16 contacts.)
4. Shell Size
“20” designates shell size. Please contact Amphenol for complete
information, as there may be limitations in shell sizes with the PC-SE
and PC-CE series.
5. Insert Ar rangeme n t
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Inse r t R o tatio n
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designate s strain relief clamp.
Indicate optional finishes as follows:
(001) bright cadm ium (standard on “PC”)
(003) olive drab cadmium plate
(005) anodic coating - Alumilite®
(011) chromate treated (Iridite 14-2)
(014) olive drab cadmium plate over nickel
(023) elect roless nickel
This connector style is some times referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
64
How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above.
SEALING PLUGS – FOR PT, SP, PC
Contact
Size
Amphenol®
Part
Number MS
Number
A
Dia.
±.010
B
Dia.
±.005 C
±.010 Color
Code
12 10-405996-12 MS27488-12 .121 .171 .564 Yellow
16 10-405996-16 MS27488-16 .083 .133 .564 Blue
20 10-405996-20 MS27488-20 .060 .090 .564 Red
How to Order: For PT, PC: 10-101949-XX (complete order number with desired shell size).
For SP: 10-150949-XX (complete order number with desired shell size).
MOUNTING FLANGE GASKETS – FOR PT, SP, PC
Shell
Size
PT, PC
10-101949 SP
10-150949
PT, SP, PC
10-101949
10-150949
R
±.010 S
±.010 R
±.010 S
±.010
F
+.016
–.000 T
±.008
6 .469 .688 .641 .953 .375 .024
8 .594 .812 .734 1.047 .500 .024
10 .719 .938 .812 1.125 .625 .024
12 .813 1.031 .938 1.250 .750 .024
14 .906 1.125 1.031 1.344 .875 .024
16 .969 1.219 1.125 1.438 1.000 .024
18 1.063 1.312 1.203 1.516 1.125 .024
20 1.156 1.438 1.297 1.672 1.250 .024
22 1.250 1.563 1.375 1.750 1.375 .024
24 1.375 1.688 1.500 1.875 1.500 .024
How to Order: 10-101988-XX (complete order number with desired shell size).
75° POTTING BOOTS – FOR PT, SP, PC
Shell
Size B
Max. D
±.015 E
±.015 L
Max.
8 .433 .312 .438 .766
10 .493 .438 .562 .830
12 .552 .516 .688 .861
14 .643 .625 .781 .916
16 .658 .656 .890 .936
18 .689 .703 1.000 .959
20 .750 .766 1.125 1.052
22 .794 .812 1.234 1.073
24 1.070 .918 1.374 1.310
All dimensions for ref erence only.
PT, SP, PC
accessories – sealing plugs, flange gaskets,
potting boots
SEALING PLUG
MS27488-XX
10-405996-XX
MOUNTING FLANGE GASKE T
10-101949-XX
10-150949-XX
75° POTTI NG BOOT
10-101988-XX
S
SR
F
R
.130 DIA SIZE 6 TO 22
.156 DIA SIZE 24
.160 DIA 10-150949
T
15º
REF
B
L
D
E
B
DIA
A
DIA
C
.135 +.030
–.025
65
How to Order: 10 -10 19 71- X X X
Add desired Add desi red finish suffi x
shell size “1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Not for use with jam nut style connectors.
CLASS “E” STRAIN RELIEF CLAMP – FOR PT, SP, PC
Shell
Size B
Max. C Thread
Class 2B D
Min. G
Max. L
Max.
8 .550 6-32 NC .240 .812 .930
10 .675 6-32 NC .302 .875 .930
12 .803 6-32 NC .428 1.000 .930
14 .920 6-32 NC .552 1.125 .930
16 1.047 6-32 NC .615 1.188 1.062
18 1.165 8-32 NC .740 1.438 1.062
20 1.291 8-32 NC .740 1.438 1.093
22 1.418 8-32 NC .928 1.719 1.093
24 1.533 8-32 NC .928 1.719 1.093
How to Order: 10 -10 19 80- X X X
Add desired Add desi red finish suffi x
shell size “1” designates bright cadmium with
clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Not for use with jam nut style connectors.
CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT, SP, PC
Shell
Size B
Max.
C
Thread
Class 2B D
Min. G
Max.
L
+.010
–.020
8 .540 6-32 NC .240 .812 .843
10 .665 6-32 NC .302 .875 .843
12 .793 6-32 NC .428 1.000 . 843
14 .910 6-32 NC .552 1.125 . 843
16 1.037 6-32 NC .614 1.188 .975
18 1.155 8-32 NC .740 1.438 .975
20 1.281 8-32 NC .740 1.438 1.007
22 1.408 8-32 NC .928 1.719 1.007
24 1.533 8-32 NC .938 1.719 1.007
How to Order: Order by 97-3057-XXXX number listed above. Standard finish is olive
drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes.
Standard accessory finishes are “1” bright cadmium with clear chromate for PC
types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP types.
Electroless nickel plating is also available on some items; consult Amphenol, Sid-
ney, NY
All dimensions for reference only.
CLASS “A” CABLE CLAMPS – FOR PT, SP, PC
Shell
Size Amphenol®
Part Number A
±.031 B
Max. C
Dia. Min. V
Thread
10 97-3057-1004 .795 .842 .3125 .6250-24
12 97-3057-1007 .850 .995 .4375 .7500-20
14 97-3057-1008 .920 1.120 .5625 .8750-20
16 97-3057-1010 .920 1.216 .6250 1.0000-20
18/20 97-3057-1012 .927 1.403 .7500 1.1875-18
22/24 97-3057-1016 1.015 1.683 .9375 1.4375-18
PT, SP, PC
accessories – clamps
CLASS “E” STRAIN RELIEF CLAMP
10-101971-XX
CLASSES “A” & “P” STRAIN
RELIEF CLAMP
10-101980-XX
CLASS “A” CABLE CLAMP
97-3057-XXXX
BDG
L
C
BDG
L
C
C
B
A
V Thread
ACCESSORIES & TOOLS
66
PT, SP, MS/PT
accessories – protection caps
How to Order Proprietary Receptacle Caps:
Wall Receptacle Caps: 10-101960- XX X
Cable Connecting Receptacle Caps: 10-101961- XX X
Jam Nut Receptacle Caps: 10-101964- XX X
Add desired shell size
Add desired finish suffix
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown in draw-
ing at left). For other chain options, an MS version cap should be ordered .
How to Order MS Version Receptacle Caps:
Wall Receptacle Caps: MS3181- XX -CA for sash chain
-CAL for long sash chain
-RA for rope chain
-RAL for long rope chain
Jam Nut Recept. Caps: MS3181- XX -NA for sash chain
-NAL for long sash chain
Shell size
MS versions are supplied with standard anodize finish only. For other finish
options a proprietary cap should be ordered.
RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT
Shell
Size
B Dia.
+.010
–.000
C Dia.
+.010
–.000
G
Dia.
Max.
L
+.020
–.000
X
Std. & MS
RA, CA, NA
X
MS only
RAL/CAL/NAL
6 .328 .454 .577 .563 3.000 5.000
8 .454 .578 .706 .563 3.000 5.000
10 .578 .703 .816 .563 3.000 5.000
12 .703 .891 1.000 .563 3.500 5.000
14 .844 1.016 1.128 .563 3.500 5.000
16 .969 1.141 1.257 .563 3.500 5.000
18 1.094 1.266 1.367 .563 3.500 5.000
20 1.219 1.391 1.496 .563 4.000 5.000
22 1.343 1.516 1.624 .563 4.000 5.000
24 1.453 1.614 1.747 .603 4.000 5.000
How to Order Proprietary Plug Caps: 10-101957-XX X
Add desired shell size
Add desired finish suffix
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown in draw-
ing at left). For other chain options an MS version cap should be ordered.
How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain
-CAL for long sash chain
-RA for rope chain
-RAL for long rope chain
PLUG PROTECTION CAPS – FOR PT, SP, MS/PT
Shell
Size
N Dia.
+.001
–.005
L Dia.
+.025
–.015
X
Std. & MS
CA, RA
X
MS only
CAL/RAL
6 .348 .532 3.000 5.000
8 .473 .532 3.000 5.000
10 .590 .532 3.000 5.000
12 .750 .532 3.500 5.000
14 .875 .532 3.500 5.000
16 1.000 .532 3.500 5.000
18 1.125 .532 3.500 5.000
20 1.250 .594 4.000 5.000
22 1.375 .594 4.000 5.000
24 1.500 .627 4.000 5.000
MS versions are supplied with standard anodize finish only.
For other finish options a proprietary cap should be ordered.
RECEPTACLE PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
10-101960-XXX 10-101961-XXX 10-101964-XXX
MS3181-XXX (Cable Connecting MS3181-XXX
(Wall Receptacle) Receptacle) (Jam Nut Receptacle)
PLUG PROTECTI ON CAP
FOR PT, SP, MS/PT CONNECTORS
MS3180-XXX
10-101957-XXX
Standard accessory finishes are “1” bright cadmium with clear chro-
mate for PC types, “3” olive drab cadmium for PT and MS/PT types,
“5” Alumilite® for SP types. Electroless nickel plating is also available
on some items; consult Amphenol, Sidney, NY
All dimensio ns for reference only. Shell size
G
L
X
.140
DIA
+.010
–.005
B
XX
C
N
L
X
.140 +.010
–.005
DIA
FOR SIZE 24
.125 +.010
–.005
DIA
FOR SIZE 6-22
67
PC
accessories – protection caps
How to Order Proprietary Receptacle Caps for PC connectors only:
Wall Receptacle Caps: 10-101950- XX X
Cable Connecting Receptacle Caps: 10-101951- XX X
Jam Nut Receptacle Caps: 10-101956- XX X
Add desired shell size
Add desired finish suffix
“1” designates bright cadmium with clear chromate (standard for PC)
“3” designates olive drab cadmium
“5” designates Alumilite®
Caps for PC connectors are supplied only in proprietary versions with standard
bead chains onl y (as sho wn in drawi ng at left).
RECEPTACLE PROTECTION CAPS – FOR PC
Shell
Size A Thread
Class 2B
B Dia.
+.010
–.000
C Dia.
+.010
–.000 G
Max. L
Max. X
±.250
6 .3750 DS .328 .454 .520 .448 3.000
8 .5000 DS .454 .578 .648 .448 3.000
10 .6250 DS .578 .703 .776 .448 3.000
12 .7500 DS .703 .891 .902 .448 3.500
14 .8750 DS .844 1.016 1.030 .448 3.500
16 1.0000 DS .969 1.141 1.157 .448 3.500
18 1.1250 DS 1. 094 1.266 1.284 .448 3.500
20 1.2500 DS 1. 219 1.391 1.412 .448 4.000
22 1.3750 DS 1. 343 1.516 1.507 .448 4.000
How to Order Proprietary Plug Caps for PC only: 10-101955-XX X
Add desired shell size
Add desired finish suffix
“1” designates bright cadmium with clear chromate (standard for (PC)
“3” designates olive drab cadmium
“5” designates Alumilite®
Caps for PC connectors are supplied only in proprietary versions with standard
bead chains onl y (as sho wn in drawi ng at left).
Standard accessory finishes are “1” bright cadmium with clear chromate for PC
types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP
types. Electroless nickel plating is also available on some items; consult Amphe-
nol, Sidney, NY
All dimensions for ref erence only.
PLUG PROTECTION CAPS – FOR PC
Shell
Size A Thread
Class 2A
B
+.010
–.000 G
Max. L
Max. X
±.250
6 .3750 DS .328 .39 9 .557 3.000
8 .5000 DS .454 .52 6 .557 3.000
10 .6250 DS .578 .643 .557 3.000
12 .7500 DS .703 .770 .557 3.500
14 .8750 DS .844 .897 .557 3.500
16 1.0000 DS .969 1.025 .557 3.500
18 1.250 DS 1.094 1.152 .557 3.500
20 1. 2500 DS 1.219 1.279 .557 4.000
22 1. 3750 DS 1.343 1.416 .557 4.000
RECEPTACLE PROTECTION CAP
FOR PC CONNECTORS
10-101950-XXX 10-101951-XXX 10-101956-XXX
(Wall Receptacle) (Cable Connecting (Jam Nut Receptacle)
Receptacle)
PLUG PROTECTI ON CAP
FOR PC CONNECTORS
10-101955-XXX
G
AL
X
.125
DIA
+.010
–.005
B
XX
C
B
G
AL
X
68
How to Order Proprietary Dummy Receptacles: 10-150921-XX X
Add desired shell size
Add desired finish suffix
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
How to Order MS Version Dummy Receptacles: MS3115-XX X
Add desired shell size
Add desired finish suffix
-A designates Alumilite®
-L designates electroless nickel
-W designates olive drab cadmium
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
Shell
Size K
±.010
M
+.030
–.000
N
+.001
–.005
Proprie tary Ve rsio n MS Version
R
±.005 S
±.010 R1
(TP) S1
(TP)
8 .062 .462 .473 .734 1.047 .594 .828
10 .062 .462 .590 .812 1.125 .719 .954
12 .062 .462 .750 .938 1.250 .812 1.047
14 .062 .462 .875 1.031 1.344 .906 1.141
16 .062 .462 1.000 1.125 1.438 .969 1.234
18 .062 .462 1.125 1.203 1.516 1.062 1.328
20 .062 .556 1.250 1.297 1.672 1.156 1.453
22 .062 .556 1.375 1.375 1.750 1.250 1.578
24 .062 .589 1.500 1.500 1.875 1.375 1.703
How to order “O” rings: Order by 10- (Proprietary) only as shown
in chart above.
NEOPRENE “O” RINGS – FOR PC
Shell
Size Amphenol®
Part Number J Dia.
±.010 T Dia.
±.003
6 10-101937-6 .172 .031
8 10-101937-8 .328 .031
10 10-101937-10 .406 .031
12 10-101937-12 .531 .031
14 10-101937-14 .641 .031
16 10-101937-16 .781 .031
18 10-101937-18 .906 .031
20 10-101937-20 .984 .031
22 10-101937-22 1.109 .031
PT, SP, PC
accessories – dummy receptacles, “O” rings,
plastic dust caps
DUMMY RECEPTACLE
FOR PT, SP, MS/PT CONNECTORS
MS3115-XXX
10-150921-XXX
NEOPRENE “O” RING
FOR PC CONNECTORS
10-101937-XX
How to Order Plastic Dust Caps:
To the basic order number add the dust cap size to
match connect or pl ug or recept acle she ll size, as
shown in the tables above.
Example: 10-7050 6-1 2 woul d be the cor rect order
number for a plastic dust cap for a PT00 receptacle,
shell size 10.
All dimensions for reference only.
FOR PT, SP
Shell
Size Plug
Plastic Dust Cap Receptacle
Plastic Dust Cap
6 10-70500-8 10-70506-8S
8 10-70506-12 10-70506-10
10 10-70500-12 10-70506-12
12 10-70506-16 10-70506-14
14 10-70506-18 10-70506-16
16 10-70506-20 10-70506-18
18 10-70506-22 10-70506-20
20 10-70506-24 10-79506-22
22 10-70524-1 10-70506-24
24 10-70506-28 10-70524-1
FOR PC
Shell
Size Plug
Plastic Dus t Cap Receptacle
Plastic Dust Cap
6 10-70576-6 10-70576-8
8 10-70576-8 10-70500-8
10 10-70500-8 10-70500-10
12 10-70500-10 10-70500-12
14 10-70500-12 10-70500-14
16 10-70500-14 10-70500-16
18 10-70576-18 10-70500-18
20 10-70576-20 10-70500-20
22 10-70576-22 10-70500-22
PLASTIC DUST CAPS
S
S
R
R
.150 DIA. +.004
–.002
4 HOLES
N
M
K
JT
69
Application Tools
“SE”, “CE”
The following data includes information pertaining to the application tools for crimping, insert-
ing and removing size 20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindri-
cal Connectors.
All crimping tools included are the “full cycling” type, and when used as specified by the manu-
facturer, provide reliable crimped wire to contact termination.
Tool frames and turret heads are available from approved tool manufacturers; consult Amphe-
nol, Sidney, NY for listings.
Assembly instructions are available online at www.amphenol-aerospace.com
See the following:
L-786 for SE assembly instructions
L-658 for CE assembly instructions
L-555 for solder type instructions
CRIMPING TOOLS
FOR PT-SE, SP-SE, PC-SE, MS/PT-SE
(MIL-C-26482, Series 1) Connectors
Contact
Size
MS Tool Part Number
Tool Frame Turret Head
20 M22520/1-01 M22520/1-02
16 M22520/1-01 M22520/1-02
12 M22520/1-01 M22520/1-02 * Use Daniels TH254 or equivalent
FOR PT-CE, SP-CE , PC-CE (Pro prietary)
Connectors
Contact
Size
MS To ol Part Num ber
Tool Frame Turret Head
20 M22520/1-01* *
16 M22520/1-01* *
INSERTION/REMOVAL TOOLS
FOR PT-SE, SP-SE, PC-SE, MS/PT-SE
(MIL-C-26482, Series 1) Connectors
Contact
Size
Insertion Tool Removal Tool
Amphenol®
Contact
Insertion Pliers
Amphenol®
Contact
Insertion Tool
MS
Part Number
Contact
Insertion Tool
Amphenol®
Contact
Remova l Tool
MS
Part Number
Contact
Remova l Tool
20 11-8107-20 11-7401-20 M81969/17-03 11-7880-20 M81969/19-07
16 11-8107-16 11-7401-16 M81969/17-04 11-7880-16 M81969/19-08
12 M81969/17-05 M81969/19-09
FOR PT-CE, SP-CE , PC-CE (Propri etary)
Connectors
Contact
Size
Insertion/Removal Tool
Contact Insertion
Pliers Contact Removal Tool
Kit
20 11-6782 11-6900
16 11-6781 11-6900
70
The following tables provide part number information for crimp contacts
used in Amp hen ol® Mi niature Cylind rica l Con nec tor s. Fo r ad dit ion al infor -
mation, consult Amphenol, Sidney, NY.
††Listed are insertable/removable contacts; however, it is intended that contacts be terminated with solder.
For additional thermocouple contact information, consult Amphenol, Sidney, NY.
See L-776 for thermocouple contact termination instructi ons. These are online at www.amphenol-aerospace.com
For PCB contacts for miniature connectors, see page 20.
CRIMP CONTACTS fo r MIL-C-26482, Series 1
(PT- SE, SP-SE) Connect or s
Contact
Size Accommodates
Wire Size
Pins Sockets
MS Number
Amphenol®
Proprietary
Number MS Number
Amphenol®
Proprietary
Number
20 20, 22 & 24 AWG M39029/31-240 10-314980-20P M3902 9/32-259 LP-597820-355
16 16, 18 & 20 AWG M39029/31-228 10-314980-16P M3902 9/32-247 10-257982-16F
12 12 & 14 AWG M39029/31-2 35 10-807100-125 M39029/32-254 10-8 07103-125
20-16 16 AWG 10-330930-20F 10-80715 5-205
16-20 20 AWG 10-330932-16F 10-33093 3-16F
12-10 12 AWG 10-330938-12F 10-33093 9-12F
CRIMP CONTACTS for PT-CE (Proprietary) Connectors
Contact
Size Accommodates
Wire Size
Pins Sockets
Amphenol®
Proprietary
Number Amphenol®
Proprietary Number
20 20, 22 & 24 AWG 10-189000-2 0F 10-597817-351
20-16 16 AWG 10-195962-20F 10-195963-20F
16 16, 18 & 20 AWG 10-189004-1 6F 10-189006-16F
THERMOCOUPLE CONTACTS for Miniature Connectors
Size Material
Pins
Proprie tar y Part Numb er Sockets
Proprie tar y Part Numb er
CE SE CE SE
16
Crimp
Termination
Chromel 10-252900-21P 10-330940-21P 10-252900-21S 10-330940-21S
Alumel 10-252900-22P 10-330940-22P 10-252900-22S 10-330940-22S
Iron
Constantan
20
Crimp
Termination
Chromel 10-252900-1P 10-330940-1P 10-252900-1S 10-330940-1S
Alumel 10-252900-2P 10-330940-2P 10-252900-2S 10-330940-2S
Iron 10-252900-3P 10-330940-3P 10-252900-3S 10-330940-3S
Constantan 10-252900-4P 10-330940-4P 10-252900-4S 10-330940-4S
20
Solder
Termination††
Chromel 10-314910-1P 10-314910-1S
Alumel 10-314910-2P 10-314910-2S
Iron 10-314910-3P 10-314910-3S
Constantan 10-314910-4P 10-314910-4S
Contacts - Power and Thermocouple Crimp
for miniature cylindrical connectors
71
Coaxial Contacts
for miniature cylindrical connectors
Amphenol® Miniature Connectors can incorporate shielded coax contacts.
The Miniature family is built around MIL-C-26482 specifications, with Mil-
approved and proprietary styles offered. Normal operating voltage for Minia-
ture cylindricals with power only contacts is up to 1,000 VAC (RMS) at sea
level.
Miniature Cylindricals offer these features for contact termination
flexibility:
Several insert arrangements that can incorporate:
• Size 8 & 12 Crimp Coax contacts for Crimp type
• Size 8 & 12 Solder Coax contacts for Solder type
Wide selection of connector shell styles and sizes
Standard power contact options within the various connector styles
include: solder type, crimp front release, crimp rear release
Coax contacts are designed to the same high performance standards as
power contacts. Coax and power contacts may be intermixed with no deg-
radation of connector reliability.
No mis-mating or cross-plugging with insert rotation and keyway
polarization.
GENERAL ORDERING INFORMATION
Ampheno l Minia ture Cy lindricals are norm ally s upplied with a f ull com plement
of power contacts, separately packaged. Coax contacts are ordered by part
number as referen ced in th e part numbe r charts o n the f ollowing p ages of t his
catalog , an d a r e s ubstituted for the po w er c ont act s a t th e ti me of the cab le or
equipm ent as semb ly. If the applic ation is fo r coax only , the c onnec tor may b e
ordered less contacts and no power contacts will be supplied.
Installation instructions for the coax contacts for Miniature Connectors are
provided in Amphenol documents as follows: L-633 for solder type; L-613 for
SE type; L-660 for CE type.
HOW TO ORDER:
A. Select the coax contacts designed for the cable being used from the appli-
cable charts in this catalog for each Miniature type (solder, SE or CE).
B. Select a connector insert from those shown on pages60-63 which will
accommodate the quantity and size of coaxial contacts needed plus any
power contacts required. Note: Size 8S and 12S contacts are used with
connector inserts through shell size 18 only. For larger connector shell
sizes, use size 8L contact s.
C. Determine the Miniature Cylindrical type, shell style, finish, service class
and insert rotation required for your application.
D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert
arrangement and connector style choices for complete connector part
number.
Solder Coax C o nt act
for use in Miniature Solder Type Connectors
Pin Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
Socket Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
CONTACTS
72
Coaxial Contacts
for miniature cylindrical connectors, cont.
Amphenol® Coaxial Contacts designed f or u se in Min ia t ure Cyl ind ric al C o nne ctors
offer the same durability advantages and design benefits for reliable interconnection as the
Amphenol coax contacts used in high performance D38999 connectors. A variety of military
and commercial shielded cables are accommodated within the miniature cylindrical series.
Amphenol supplies coax contacts for solder, crimp SE and crimp CE connector styles.
Other features of the coax for miniature cylindricals include:
Miniature coax design has an outside nut within the
assembly for fast, reliable assembly of contact to cable.
All types feature solder style inner contacts and crimp
style outer contacts for reliable cable termination
Miniature coax crimp type contacts are designed for use
in Miniature crimp series connectors
Miniature coax solder type contacts are designed for
use in Miniature solder series connectors. These
come pre-installed into the solder connector.
TYPICAL ELECTRICAL PERFORMANCE
Size 8 and 12 Coax Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Diele ctric With sta nd ing Voltage :
Size 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 8 & 12: 250 VAC Rms @ 50,000 ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
Typical VSWR for size 8 & 12 PT-SE Types II & III only:
1.2 + .12F (GHz) up to 10 GHz
EXPLANATION OF TYPE CLASSIFICATIONS:
PT-SE Type I is moisture seal design with internal O-ring.
PT-SE Type II is 50 ohm impedance matched version. Contacts ter-
minated to other than 50 ohm cables are therefore not matched.
PT-SE Type III is 50 ohm contact, non-serviceable after assembly
Solder and CE Types are non-impedance matched contacts.
CONTACT FINISHES:
Suffix Finish
1 0.00020 min. silver over copper flash
2 0.00005 min. gold (Knoop hardness 130-200) over silver
3 0.00010 min. gold (Knoop hardness 130-200) over silver
4 0.00010 min. gold (Knoop hardness 130-200) over copper
5 0.00005 min. gold (Knoop hardness 130-200) over nickel
E 0.00005 min. gold (Knoop hardness 90 max.) over copper
F 0.00005 min. gold (Knoop hardness 130-200) over copper
H 0.00010 min. gold (Knoop hardness 130-200) over copper
TYPICAL MINIATURE CRIMP COAX
SOCKET CONTACT has crimp socket outer
contact with a solder pin inner contact
TYPICAL MINIATURE CRIMP COAX PIN
CONTACT has crimp pin outer contact
with a solde r socket inner contact
73
Coaxial Contacts
for miniature cylindrical connectors, cont.
solder (MIL-C-26482 Series 1 type) - applicatio n data
SOLDER COAX CONTACTS
For use in Miniature Solder Type Connectors: PT , SP, MS /PT and PC Styles
Cable
Contact Part Number
Contact
Size
Dimensional Data
(See Drawings above) Crimp Fer rule Tools
Retai ner Nut
Wrench
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L
Length Ref.
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
RG-58C/U,
RG-141A/U,
RG-303/U 21-33020-2 21-33019-2 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33020-1 21-33019-1 8L 0.040
± 0.001 0.219 0.280 1.176 1.177 M22910 /7-18 (B) M22520/5-45 (B) 11-8676-3
21-33020-3 21-33019-3 8S 0.040
± 0.001 0.219 0.280 1.114 1.115
RG-142B/U,
Times MI51115 21-33020-7* 21-33019-7* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-16 (B) M22520/5-43 (B) 11-8676-2
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
21-33020-32* 21-33019-32* 12S 0.0300
± 0.0005 0.140 0.172 1.092 1.093 M229 10/7-12 (B) M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B) M22520/10-05 (A) 11-8676-1
RG-178B/U 21-33020-4 21-33019-4* 8S 0.040
± 0.001 0 .21 9 0.28 0 1.114 1. 115 M22910/7 -11 (B) M2 2520/5 - 03 (B)
M22520/5-33 (B) M22520/10-05 (B) 11-8676-2
RG-196A/U 21-33020-31† 21-33061-31* 12S 0.0300
± 0.0005 0.14 0 0.172 1.092 1.093 M2 29 10 /7-11 (B) M22520/5-03 ( B)
M22520/5-33 (B) M22520/10-05 (B) 11-8676-1
RG-180B/U,
RG-195A/U,
Raychem
5022D1312-9
21-33020-5* 21-33019-5* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
Raychem
5021D1331-9 21-33020-6* 21-33019-6* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
Thermatics
2929-29 21-33020-33 21-33061-33 12S 0.0200
± 0.0005 0.140 0.172 1.092 1.093 M229 10/7-13 (B) M22520/5-37 (B) 11-8676-1
NOTE: Contacts can be ordered by part numbers given in chart
NOTE: Size 8S and 12S contact s are used with connector inser ts thro ugh
shell size 18 only. For larger connector shell sizes, use size 8L contacts.
CONT ACT FINISH: For all contacts in this series feature 0.000050 minimum
gold (Knoop hardness 130-200).
* Consul t Amphenol, Si dney NY f or availability
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers
indicate applicable die closure. Commercial equivalents with the same die closure
dimension may be used.
21-33020-31 and 21-33061-31 onl y mate with each other
H
G
L
F
H
G
L
F
PIN
SOCKET
MATING
PIN DIA
MATING
PIN DIA
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
74
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-C-26482 Series 1 type) - application data
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles
Cable
Contact Part Number
Contact
Size
Type
(See
Pg. 23)
Finish
on
Mating
Parts
(See
Pg. 23)
Dimensional Data
(See Drawings above) Crimp Ferrule Tools Retainer
Nut
Wrench
Installation Tools
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L
Length Ref.
Insertion Removal
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-0
Tool
Use with Di e Part
Number
RG-55B/U,
RG-142A/U,
RG-142B/U,
RG-223/U
21-33012-21
21-33012-25 21-33011-21
21-33011-25 8
8I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A)
M225 20/5-19 (B) M225 20/10-07 ( A) 11-8676-2 11-8369-5
11-8660-5 11-7880-8
11-8154-1
21-33038-21
21-33038-25* 21-33037-21
21-33037-25 8
8I
II 4
21-33138-21( )*
21-33138-25( )* 21-33137-21( )*
21-33137-25( )* 8
8I
II **
RG-58C/U,
RG-141A/U,
RG-303/U
21-33012-22
21-33012-26 21-33011-22
21-33011-26 8
8I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B)
M225 20/5-41 (B) M225 20/10-07 ( B) 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-22*
21-33038-26* 21-33037-22
21-33037-26* 8
8I
II 4
21-33138-22( )*
21-33138-26( )* 21- 33137-2 2( )
21-33137-26( )* 8
8I
II **
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33012-36 21-33011-36 8 II 2 0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B) 11-8676-3 11-8369-5
11-8660-5 11-7880-8
11-8154-1
21-33038-36* 21-33037-36 8 II 4
21-33138-36( )* 21-33137-36( ) 8 II **
RG-140/U,
RG-302/U
21-33012-37* 21-33011-37* 8 II 2 0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A)
M22520/5-19 (B) M22520/10-07 (A) 11-8676-2 11-8369-5
11-8660-5 11-7880-8
11-8154-1
21-33038-37* 21-33037-37* 8 II 4
21-33138-37( )* 21-33137-37( )* 8 II **
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
21-33012-34
21-33012-30 21-33011-34
21-33011-30 8
8I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144
M229 10/7-12 (B) M22520/5- 03 (A)
M22520/5-08 (A)
M225 20/5-35 (B) M225 20/10-05 ( A)
11-8676-2
11-8369-2
11-8660-2
11-7880-8
11-8154-1
21-33038-34
21-33038-30 21-33037-34
21-33037-30 8
8I
II 4
21-33138-34( )*
21-33138-30( )* 21-33137-34( )*
21-33137-30( )* 8
8I
II **
21-33012-1
21-33012-4 21-33011-1
21-33011-4 12
12 I
II 2
0.0200
±0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12
11-8154-2
21-33038-1*
21-33038-4 21-33037-1*
21-33037-4* 12
12 I
II 4
21-33138-1( )*
21-33138-4( )* 21-33137-1( )
21-33137-4( )* 12
12 I
II **
RG-178B/U,
RG-196A/U
21-33012-35 21-33011-35 8 I 2 0.0355
±0.0010 0.218 0.280 1.156 1.144
M229 10 /7-11 (B) M22520/5-03 (B)
M225 20/5-33 (B) M225 20/10-05 ( A)
11-8676-2
11-8369-1
11-8660-1
11-7880-8
11-8154-1
21-33038-35 21-33037-35 8 I 4
21-33138-35( )* 21-33137-35( )* 8 I **
21-33012-3*
21-33012-5 21-33011-3*
21-33011-5 12
12 I
II 2
0.0200
± 0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12
11-8154-2
21-33038-3*
21-33038-5 21-33037-3*
21-33037-5* 12
12 I
II 4
21-33138-3( )*
21-33138-5( )* 21-33137-3( )*
21-33137-5( )* 12
12 I
II **
NOTE: Contacts can be ordered by part numbers given in chart
** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-
thesis of the contact part number with the finish suffix number. However, you should con-
sul t Amphenol Sidney NY regarding the availability of all finish choices for each part
* Consul t Amphenol, Si dney NY f or availability
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-
cate applicable die closure. Commercial equivalents with the same die closure dimension
may be used
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
MATING
PIN DIA
H
G
SOCKET
FL
MATING
PIN DIA
H
G
PIN F
L
75
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-C-26482 Series 1 type) - application data, cont.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT -SE , SP-SE, MS/PT-SE and PC-SE Styles
Cable
Contact Part Number
Contact
Size
Type
(See
Pg. 23)
Finish
on
Mating
Parts
(See
Pg. 23)
Dimensional Data
(See Drawings pg. 25) Crimp Ferrule Tool s Retainer
Nut
Wrench
Installation Tools
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L
Length Ref.
Insertion Removal
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-0
Tool
Use with Di e Part
Number
RG-180B/U,
RG-195A/U
21-33012-24
21-33012-46* 21-33011-24
21-33011-46* 8
8I
II 2
0.0355
± 0.0010 0.2 18 0.280 1.156 1.144 M22520/7-15 (B) M22520/5-05 (B)
M225 20/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-24
21-33038-46* 21-33037-24
21-33037-46* 8
8I
II 4
21-33138-24( )*
21-33138-46( )* 21-33137-24( )*
21-33137-46( )* 8
8I
II **
Raychem
9527E1118,
RG-180B/U,
RG-195A/U
21-33106-40( ) 21-33105-4 0( ) 12 III ** 0.0200
± 0.0005 0.128 0.899 0.879 Daniels GS200 Tool with G2P330 or
M225 20 /31-01 Tool with P osi ti oner M225 20 /3 1- 0 2 11-8674-
12 11-7880-12
11-8154-2
RG-188 or
RG-316
Double Braid
21-33012-6*
21-33012-7* 21-33011-6*
21-33011-7* 12
12 I
II 2
0.0200
± 0.0005 0.128 0.172 1.092 1.072
M229 10/7-13 (B) M22520/5- 37 (B)
11-8676-1 11-8369-2
11-8660-2 11-7880-12
11-8154-2
21-33038-6*
21-33038-7* 21-33037-6*
21-33037-7* 12
12 I
II 4
21-33138-6( )*
21-33138-7( )* 21-33137-6( )*
21-33137-7( )* 12
12 I
II **
Thermax
50C-25A-
DS-1
21-33012-44 21-33011-44 8 II 2 0.0355
± 0.0010 0.128 0.280 1.156 1.144 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-44* 21-33037-44* 8 II 4
21-33138-44( )* 21-33137-44( )* 8 II **
RG-195
Double Braid
21-33012-28 21-33011-28 8 I 2 0.0355
± 0.0010 0.1 28 0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B) 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-28* 21-33037-28* 8 I 4
21-33138-28( )* 21-33137-28( )* 8 I **
RG-122/U,
Raychem
5022E5111
21-33012-23
21-33012-27 21-33011-23
21-33011-27 8
8I
II 2
0.0355
± 0.0010 0.2 18 0.280 1.156 1.144 M22520/7-15 (B) M22520/5-05 (B)
M225 20/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-23*
21-33038-27 21-33037-23*
21-33037-27 8
8I
II 4
21-33138-23( )*
21-33138-27( )* 21-33137-23( )*
21-33137-27( )* 8
8I
II **
Raychem
9530D5314
21-33012-31 21-33011-31 8 I 2
21-33038-31 21-33037-31 8 I 4
21-33138-31( )* 21-33137-31( )* 8 I **
Raychem
9527A1317
21-33012-39 21-33011-39 8 II 2 0.0355
± 0.0010 0.2 18 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B)
M225 20/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4 11-7880-8
11-8154-1
21-33038-39* 21-33037-39* 8 II 4
21-33138-39( )* 21-33137-39( )* 8 II **
Raychem
7527A1318
21-33012-40* 21-33011-40 8 II 2 0.0355
± 0.0010 0.2 18 0.280 1.156 1.144 M22910/7-12 (B) M22520/5-03 (A)
M225 20/5-08 (A)
M225 20/5-35 (B) M225 20/10-05 ( A) 11-8676-2 11-8369-2
11-8660-2 11-7880-8
11-8154-1
21-33038-40* 21-33037-40* 8 II 4
21-33138-40* 21-33137-40( )* 8 II **
Westrex
199-49-1,
Tensolite
30850/87T-1
21-33012-43 21-33011-43 12 II 2 0.0200
± 0.0005 0.128 0.172 1.092 1.072 M22910/7-11 (B) M22520/5-03 (B)
M225 20/5-33 (B) M22520/10-05 (B) 11-8676-1 11-8369-1
11-8660-1 11-7880-12
11-8154-2
21-33038-43 21-33037-43 12 II 4
21-33138-43( )* 21-33137-43( )* 12 II **
NOTE: Contacts can be ordered by part numbers given in chart
** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-
thesis of the contact part number with the finish suffix number. However, you should con-
sul t Amphenol, Sidney, NY regarding the availability of all finish choices for each part
number.
* Consul t Amphenol, Si dney NY f or availability
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-
cate applicable die closure. Commercial equiva lents with the same die closure dimension
may be used.
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
76
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp CE (MIL-C-26482 Series 1 type) - application data
CE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connecto rs: PT -CE, SP-CE and PC-CE Styles
Cable
Contact Part Number
Contact
Size
Dimens ion al Da ta
(See Drawings above) Cr imp Fe rrule Tools Retainer
Nut
Wrench
Installa tion Tools
G
Dia.
± 0.001
H
Dia.
±0.001
F
Across
Flats
±0.004
L
Length Ref.
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
Insertion Removal
RG-58C/U,
RG-141A/U,
RG-303/U 21-33024-1 21-33023-1 8 0.040 0.219 0.280 1.239 1.285 M22910/7-15 (B) M22520/5-01 (B)
M22520/5-41 (B) M22520 /1 0- 0 7 (B) 11-8676-2 11-8369-4
11-8660-4 11-7310
RG-178B/U,
RG-196A/U 21-33024-2 21-33023-2 8 0.040 0.219 0.280 1.039 1.085 M22910/7-1 1 (B) M22520/5-03 (B)
M225 20/5-33 (B) M225 20 /1 0- 0 5 (B) 11-8676-2 11-8369-1
11-8660-1 11-7310
NOTE: Contacts can be ordered by part numbers given in chart
* Consu lt A mp he no l, Sid ney NY for av ai lability
CONTACT FINISH: for all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200) .
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die
closure. Commercial equivalents with the same die closure dimension may be used.
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
SOCKET
H
L
G
MATING
PIN DIA
F
PIN
H
L
G
MATING
PIN DIA
F
77
F
F
RB
CUT-OUT FOR
PT ONLY PIN LOCATION FOR PC ONLY SECTION
JAM NUT MOUNTINGS
FLANGE MOUNTED CONNECTORS
All flange mounting PC and PT connectors use standard MS
mounting dimensions. They cannot be back panel mounted
due to coupling clearance. The PTB (thru-bulkhead) type con-
nector must also be back panel mounted on one side. Flange
gaskets are available for both series, see page 64.
Shell
Size
R
(TP) D
Dia.
PC & PT SP PC & PT SP
6 .469 .641 .323 .439
8 .594 .734 .449 .563
10 .719 .812 .573 .680
12 .812 .938 .699 .859
14 .906 1.031 .823 .984
16 .969 1.125 .949 1.108
18 1.062 1.203 1.073 1.233
20 1.156 1.297 1.199 1.358
22 1.250 1.375 1.323 1.483
24 1.375 1.449
JAM NUT MOUNTINGS
The jam nut design has become very popular because it allows
bench wiring of harness assemblies. The labor saving often off-
sets the added cost of the jam nut receptacle which is due to
the self contained “O” ring and the extra nut. The PC series
mounts in a round hole and can be pinned to prevent rotation.
The PT series mounts in a “D” mounting hole and does not
require pinning.
Shell
Size
R
+.010
–.000
B
+.000
–.010 F
±.010
P
Panel Thickness
Min. Max.
6 .447 .420 .286 .062 .125
8 .572 .542 .331 .062 .125
10 .697 .669 .375 .062 .125
12 .884 .830 .442 .062 .125
14 1.007 .955 .486 .062 .125
16 1.134 1.084 .530 .062 .125
18 1.259 1.208 .573 .062 .125
20 1.384 1.333 .641 .062 .250
22 1.507 1.459 .685 .062 .250
24 1.634 1.575 .062 .250
HERMETIC RECEPTACLE MOUNTINGS
This series must be mounted in such a way as to preserve the
hermetic seal provided by the glass insert. Mounting data for
box and jam nut receptacles is given above. Cut-out required
for solder mounting receptacles (N) is given below.
Shell
Size N
Max.
6.458
8.582
10 .692
12 .801
14 .926
16 1.051
18 1.176
20 1.395
22 1.375
The finish of each of these hermetic
receptacles is fused electro-deposited
tin for easy solderability, and protected
by a special lacquer for optimum shelf
life. The lacquer will not interfere with
any soldering operation.
Low temperature solder should be used
and the addition of a solder fillet at
arrow points on drawing at right is rec-
ommended. Care must be taken that
the operating temperature of the final
assembly does not rise above the melt
-
Mounting Recommendations
for miniature cylindrical connectors
CONNECTOR MOUNTING
RECOMMENDATIONS
N
CUT-OUT SOLDER
RECEPTACLE JAM NUT
RECEPTACLE
(See dimensions
above)
BOX
RECEPTACLE
(See dimensions
above)
HERMETIC RECEPTACLES
R
(TP)
R
2
D Dia.
R
2
.120 Dia. for Shell Sizes 6-22
PC & PT
.147 Dia. for
Size 24 PT
.150 Dia. for
SP only
4 HOLES
CUT-OUT SECTION
No. 4 Screw
for PC & PT
No. 6 Screw
for SP and for
Size 24 PT
FLANGE MOUNTED CONNECTORS
78
MIL-C-26482, Series 2
MIL-C-26482, Series 2 connectors are provided with the Amphe-
nol®/Matrix® family of miniature cylindricals These are bayonet
coupling type, and they feature crimp contacts that are rear insert-
able and rear releasable.
There are six shell styles available and 34 insert arrangements.
Milita ry p art n um bers of the M atri x M IL -C -264 82 family i ncl ud e th e
following:
MS3470 wall mounting receptacle with narrow flange
MS3472 wall mounting receptacle with wide flange
MS34 71 cable connecting rec epta cl e
MS3474 jam nut receptacle
MS3476 straight plug
MS3475 plug with RFI grounding fingers
See catalog 12-071 for more information.
Geophysical Miniature Cylindricals
Desig ne d f or t he Geophys ic al i ndu stry ’s ru gge d env iro nm ent s, the
Amphenol® Geophysi cal Se ries connector has custom f eatures
that provide reliability in extreme temperature and moisture condi-
tions.
The unique shell design provides stronger shells along with an
anodized (nonconductive) finish for greater salt, corrosion and
abrasion resistance. Coupling nuts are manufactured with round
detent ho les and are sold separately for grea ter customer f lexibil-
ity. See product data sheet #146.
RJ Field Bayonet MIL-C-26482 Cylindricals
Amphenol PCD division provides MIL-C-26482 bayonet coupling
cylind ric al co nne ct ors w ith an RJ4 5 Ethernet int erfa ce*. The se are
design ed for use in al l levels of harsh enviro nment s from indu st rial
to mil- aero applica tio ns pro vi din g IP67 protect ion fro m dus t, f lui ds ,
vibration, shock and traction. The Amphenol® RJ Field allows the
use of Ethernet Class D/Cat 5 and Cat 5e connections for 10
BaseT, 100 Base TX, or 1000 BaseT networks. It works with any
standard RJ45 cordset with no extra tooling. It also offers rein-
forced EMI protection.
For more information go online to www.rjfield.com or ask for the
Field Series brochure.
* Other Field Series products are available through Amphenol PCD. These include
RJF TV within MIL-DTL-38999 Series III threaded coupling connectors, and RJF
544 within ECTA push-pull plastic shell coupling.
Other Amphenol Miniature Cylindrical
Connectors
Geophysical
Miniature Cylindricals
MIL-C-26482
Series 2
RJ Field Bayonet
MIL-C-26482 Cylindricals