Notes:
(1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
Symbols HER
101G
HER
102G
HER
103G
HER
104G
HER
105G
HER
106G
HER
107G
HER
108G Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 210 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 300 400 600 800 1000 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=50 I(AV) 1.0 Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM 30.0 Amps
Maximum instantaneous forward voltage at 1.0A DC VF1.0 1.3 1.5 1.7 Volts
Maximum full load reverse current average, full cycle
0.375" (9.5mm) lead length at TL=55 IR(AV) 100.0 A
Maximum DC reverse current TA=25
at rated DC blocking voltage IR5.0 A
Typical reverse recovery time (Note 1) Trr 50.0 75.0 nS
Typical junction capacitance (Note 2) CJ15 12 F
Operating and storage temperature range TJ, TSTG -65 to +150
Features
Mechanical Data
HER101G THRU HER108G
HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Low power loss, high efficiency
Low leakage
Low forward voltage
High current capability
High speed switching
High surge capability
High reliability
Case: Molded plastic
Epoxy: UL94V-0 rate flame retardant
Lead: MIL-STD-202E method 208C guaranteed
Mounting Position: Any
Weight: 0.012 ounce, 0.335 gram
Maximum Ratings and Electrical Characteristics
1
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.165 0.205 4.2 5.2
B 0.079 0.106 2.0 2.7
C 0.028 0.034 0.71 0.86
D 1.000 - 25.40 -
RATINGS AND CHARACTERISTIC CURVES
2
