Infrared Receiver Control Receiver Module IRM-36xxM series Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies Min burst length: 6 cycles Min gap length: 10 cycles Suitable for continuous code Low operating voltage and low power consumption Optimized immunity against TFT backlight interferences High immunity against ambient light Long reception range High sensitivity Pb free and RoHS compliant 1 2 3 Description The IRM-36xxM series devices are miniature type infrared receivers which have been developed and designed by using the latest IC technology, specially optimized to suppress interferences from TFT backlight. The photo diode and preamplifier are assembled onto a lead frame and molded into an epoxy package which operates as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. Pin Configuration 1. OUT 2. GND 3. VCC Applications * AV equipment such as TV, VCR, DVD, CD, MD, etc. * Short pause time protocols * Toy applications * CATV set top boxes * Multi-media Equipment * Other devices using IR remote control Application Circuit Block Diagram The RC Filter must be connected as close as possible to Vcc and GND pins. Everlight Electronics Co., Ltd. Document No: DMO-0000128 1 Rev.1 http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Parts Table Model No. Carrier Frequency IRM-3636M 36 kHz IRM-3638M 38 kHz IRM-3640M 40 kHz Package Dimensions (Dimensions in mm) Notes: Tolerance unless otherwise mentioned 0.3mm Everlight Electronics Co., Ltd. Document No: DMO-0000128 2 Rev.1 http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating Unit Supply Voltage Vcc 6 V Operating Temperature Topr -20 ~ +80 Storage Temperature Tstg -40 ~ +85 Soldering Temperature *1 Tsol 260 *1 4mm from mold body for less than 10 seconds Electro-Optical Characteristics (Ta=25, Vcc=3V) Parameter Symbol MIN. TYP. MAX. Unit Condition Current consumption Icc --- 0.4 0.6 mA No input signal Supply voltage VCC 2.7 - 5.5 V p --- 940 --- nm L0 14 --- --- L45 6 --- --- Half angle(horizontal) h --- 35 --- deg Half angle(vertical) v --- 35 --- deg High level pulse width TH 450 --- 700 s Low level pulse width TL 500 --- 750 s Test signal according to figure 1 High level output voltage VOH Vcc-0.4 --- --- V ISOURCE1A Low level output voltage VOL --- 0.2 0.5 V ISINK2mA Internal pull up resistor RPU 85 100 115 k Peak wavelength Reception range Everlight Electronics Co., Ltd. Document No: DMO-0000128 3 Rev.1 m See chapter Test method' http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Test method The specified electro-optical characteristics are valid under the following conditions. 1. Measurement environment A place without extreme light reflections. 2. External light The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev10Lux). 3. Standard transmitter The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the transmitter is adjusted until Vo=400mVp-p. Both, the test transmitter and the photo diode, have a peak wavelength of 940nm. The photo diode for calibration is PD438B (p=940nm, Vr=5V). 4. The measurement system is shown in Fig.-3 Fig.-1 Transmitter Wave Form D.U.T output Pulse Fig.-2 standard transmitter calibration Everlight Electronics Co., Ltd. Document No: DMO-0000128 Fig.-3 4 Rev.1 Measuring System http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Typical Electro-Optical Characteristic Curves Everlight Electronics Co., Ltd. Document No: DMO-0000128 5 Rev.1 http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Code information Protocol Suitable Protocol Suitable JVC Yes RCA Yes Matsushita Yes Sharp Yes Mitsubishi Yes Sony 12 Bit Yes NEC Yes Sony 15 Bit No RC5 Yes Sony 20Bit No RC6 Yes Toshiba Yes RCMM Yes Zenith Yes RCS-80 Yes Continuous Code Yes Device Marking Notes 1 denotes Year code 2 denotes Month code 3 denotes Device number 4 denotes Carrier frequency (2: 36KHz, 4: 38KHz and 5: 40KHz) Everlight Electronics Co., Ltd. Document No: DMO-0000128 6 Rev.1 http://www.everlight.com February 8, 2010 Infrared Receiver Control Receiver Module IRM-36xxM series Packing Quantity 1500 pcs / Box 10 Boxes / Carton DISCLAIMER 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. Everlight Electronics Co., Ltd. Document No: DMO-0000128 7 Rev.1 http://www.everlight.com February 8, 2010