TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 FEATURES * * * * * * * Offers Bandwidth Allocation of PCI ExpressTM Signal Using Two-Lane 1:2 Multiplexer/Demultiplexer Vcc Operating Range From 1.7 V to 1.9 V Supports Data Rates of 2.5 Gbps Port-Port Crosstalk (-39 dB at 1.25 GHz) OFF Port Isolation (-38 dB at 1.25 GHz) Low ON-State Resistance (10 Typ) Low Input/Output Capacitance (3.5 pF Typ) * * * Excellent Differential Skew (5 ps Max) Minimal Propagation Delay ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) DESCRIPTION/ORDERING INFORMATION The TS2PCIE2212 can be used to muxltiplex/demultiplex two PCI ExpressTM lanes, each representing differential pairs of receive (RX) and transmit (TX) signals. The switch operates at the PCI Express bandwidth standard of 2.5-Gbps signal-processing speed. The device is composed of two banks, with each bank accommodating two sources (source A and source B) and two destinations (destination A and destination B). When a logic-level low is applied to the control (CTRL) pin, source A is connected to destination A and source B is connected to destination B. When a logic-level high is applied to CTRL, source A is connected to destination B, while source B and destination A are open. ORDERING INFORMATION TA PACKAGE 0C to 85C BGA - ZAH ORDERABLE PART NUMBER Tape and reel TOP-SIDE MARKING TS2PCIE2212ZAHR ZAH PACKAGE (BOTTOM VIEW) 5 mm J H G F E D C B A 5 mm 12 3 4 5 6 7 8 9 TERMINAL ASSIGNMENTS 1 2 A CTRL0 TxSB:0P B RxSA:0P C GND 3 TxSB:0N 4 5 6 TxSA:0P GND TxDA:0P TxSA:0N VDD TxDA:0N 7 TxDB:0N 8 9 TxDB:0P NC GND RxDA:0P RxSA:0N RxDA:0N D RxSB:0P RxSB:0N RxDB:0N E GND VDD VDD GND F TxSA:1P TxSA:1N TxDA:1N TxDA:1P G TxSB:1N H TxSB:1P GND J NC RxSA:1P RxDB:0P TxDB:1N RxSA:1N RxSB:1N VDD RxDB:1N RXSB:1P GND RXDB:1P RxDA:1N GND TxDB:1P RxDA:1P CTRL1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PCI Express is a trademark of PCI-SIG. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006, Texas Instruments Incorporated TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 PIN DESCRIPTION NAME FUNCTION TxSA:nP, TxSA:nN Source A transmit pair RxSA:nP, RxSA:nN Source A receive pair TxSB:nP, TxSB:nN Source B transmit pair RxSB:nP, RxSB:nN Source B receive pair TxDA:nP, TxDA:nN Destination A transmit pair RxDA:nP, RxDA:nN Destination A receive pair TxDB:nP, TxDB:nN Destination B transmit pair RxDB:nP, RxDB:nN Destination B receive pair CTRL0 Control signal for bank 0 CTRL1 Control signal for bank 1 VDD Positive supply voltage GND Ground (0 V) NC No internal connection LOGIC DIAGRAM CTRL0 TxSA:0 2 2 2 2 TxSB:0 TxDB:0 2 2 RxDA:0 RxSA:0 2 2 RxDB:0 RxSB:0 TxSA:1 2 2 TxDA:1 2 2 TxSB:1 TxDB:1 2 2 RxSA:1 RxSB:1 RxDA:1 2 2 RxDB:1 CTRL1 2 TxDA:0 Submit Documentation Feedback TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 FUNCTION TABLE CTRLn FUNCTION L SA:n = DA:n, SB:n = DB:n H SA:n = DB:n, DA:n = open, SBin = open Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VDD Supply voltage range -0.5 2.5 UNIT V VIN Control input voltage range (2) (3) -0.5 2.5 V VI/O Switch I/O voltage range (2) (3) (4) -0.5 2.5 V IIK Control input clamp current VIN < 0 and VI/O < 0 50 mA II/OK I/O port clamp current VIN < 0 and VI/O < 0 50 mA II/O ON-state switch current (5) 100 mA Continuous current through VDD or GND 100 mA JA Package thermal impedance (6) TBD C/W Tstg Storage temperature range 150 C (1) (2) (3) (4) (5) (6) -65 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. VI and VO are used to denote specific conditions for VI/O. II and IO are used to denote specific conditions for II/O. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions MIN TYP MAX 1.7 1.8 1.9 UNIT VDD Supply voltage VIH High-level control input voltage CTRL VIL Low-level control input voltage CTRL VIO Data input/output voltage 0 VDD V TA Operating free-air temperature 0 85 C Submit Documentation Feedback 0.65 VDD V V 0.35 VDD V 3 TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TA = 0C to 85C TEST CONDITIONS MIN VIK Control inputs VDD = 1.7 V, IIN = -18 mA IIN Control inputs VDD = 1.9 V, VIN = VDD or GND IOZ VDD = 1.9 V, VO = 0 to 1.9 V, VI = 0, Switch OFF ICC VDD = 1.9 V, VIN = VDD or GND, II/O = 0, Switch ON or OFF Cin Control inputs TYP UNIT MAX -1.8 V 1 A 5 A 160 300 A VDD = 1.9 V, VIN = VDD or GND 0.5 1.0 pF CIO(OFF) SB or DA port VI/O = 0 V, Switch OFF 1.4 1.5 pF CIO(ON) VI/O = 0 V, Switch ON 3.5 4 pF VDD = 1.7 V, VI = 0 V, IO = 10 mA 10 14 VDD = 1.7 V, VI = 1.5 V, IO = -10 mA 12 17 VDD = 1.7 V, IO = 10 mA, VI = 1.5 V 0.4 V 2.5 5 ron ron(flat) Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS DR Data rate per TX or RX pair tpd Propagation delay, Sx to Dx See Figure 7 tsk TA = 0C to 85C MIN TYP MAX UNIT 2.5 Gbps 250 ps Intra-pair skew f =1.25 GHz, See Figure 7 5 ps ten (tPZL, tPZH) Switch turn-on delay, CTRL to DA See Figure 6 5 ns tdis (tPLZ, tPHZ) Switch turn-off delay, CTRL to DA See Figure 6 2.5 ns ILOSS Differential insertion loss f =1.25 GHz, RLOAD = 50 , See Figure 1 -3.2 dB RLOSS Differential return loss f =1.25 GHz, RLOAD = 50 , See Figure 2 Common-mode insertion loss f =1.25 GHz, RLOAD = 50 , See Figure 3 Differential OFF isolation f =1.25 GHz, RLOAD = 50 , See Figure 4 Differential crosstalk f =1.25 GHz, RLOAD = 50 , See Figure 5 ILOSS(CM) OIFF XTALK 4 DESCRIPTION Submit Documentation Feedback -2.5 -7.2 -9.5 dB -2 dB -33 -38 dB -33 -39 dB TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 OPERATING CHARACTERISTICS 0 0 -5 -2 Decibel (dB) Decibel (dB) -1 -3 -4 -10 -15 -20 -5 -6 0.01 0.10 1.00 -25 0.01 10.00 0.10 Frequency (GHz) 1.00 10.00 Frequency (GHz) Figure 1. Differential Insertion Loss vs Frequency Figure 2. Differential Return Loss vs Frequency 0 0 -2 Decibel (dB) -6 -8 -40 -60 -10 -12 0.01 0.10 1.00 -80 0.01 10.00 0.10 Frequency (GHz) 1.00 10.00 Frequency (GHz) Figure 3. Common-Mode Insertion Loss vs Frequency Figure 4. Differential OFF Isolation vs Frequency 0 -20 Decibel (dB) Decibel (dB) -20 -4 -40 -60 -80 0.01 0.10 1.00 10.00 Frequency (GHz) Figure 5. Differential Crosstalk vs Frequency Submit Documentation Feedback 5 TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) VDD Input Generator VIN 50 CTRL 50 VG1 TEST CIRCUIT DUT 2 x VDD Input Generator VI 50 RL VO SA S1 VG2 CL (see Note A) RL TEST VCC S1 RL VI CL V tPLZ/tPZL 1.8 V 0.1 V 2 x VDD 100 GND No Load 0.3 V tPHZ/tPZH 1.8 V 0.1 V GND 100 VDD No Load 0.3 V Output Control (VIN) VDD VDD/2 Output Waveform 1 S1 at 2 y VDD tPZL (see Note B) VDD/2 0V tPLZ VOH VDD/2 tPZH Output Waveform 2 S1 at GND (see Note B) Open GND VOL + 0.3 V VOL tPHZ VDD/2 VOH - 0.3 V VOH VOL VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. Figure 6. Test Circuit and Voltage Waveforms 6 Submit Documentation Feedback TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 PARAMETER MEASUREMENT INFORMATION VDD TS2PCIE2212 T1(1) A1 Sx:nP Input Generator CTRL0 GND Dx:nP VI VO Sx:nN VDD 100 Dx:nN TEST PATH T1(1) SA:n = DA:n, SB:n = DB:n GND SA:n = DB:n, DA:n = open VDD (1) T1 is an external terminal. VCOM + 400 mV Input Waveform VCOM VCOM VCOM - 400 mV tPLH tPHL VOH Output Waveform VCRS VCRS VOL VCOM = 1.5 V VCRS is the cross point of the differential signal. tsk = |tPLHn - tPHLn| Figure 7. Test Circuit for Propagation Delay and Intra-Pair Skew Submit Documentation Feedback 7 TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 PARAMETER MEASUREMENT INFORMATION (continued) VDD TS2PCIE2212 A1 VDD CTRL0 SA:nP DA:nP SA:nN DA:nN GND 50 50 Network Analyzer SB:nP DB:nP SB:nN DB:nN 50 50 TEST VNA MEASUREMENT Differential insertion loss S21 Differential return loss S11 Common-mode insertion loss S21 Figure 8. Differential Insertion Loss, Differential Return Loss, and Common-Mode Insertion Loss Test Circuit 8 Submit Documentation Feedback TS2PCIE2212 PCI ExpressTM SIGNAL SWITCH www.ti.com SCDS209 - JUNE 2006 PARAMETER MEASUREMENT INFORMATION (continued) VDD TS2PCIE2212 A1 TxSA:0P TxSA:0N A4 A6 CTRL0 VDD GND TxDA:0P 50 TxDA:0N B4 B6 A2 A8 TxDB:0P B3 B7 50 Network Analyzer TxSB:0P T1(1) 50 TxSB:0N TxDB:0N 50 TEST T1(1) Differential crosstalk GND Differential OFF isolation VDD (1) T1 is an external terminal. Figure 9. Differential Crosstalk and OFF Isolation Test Circuit Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 25-Nov-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TS2PCIE2212ZAHR ACTIVE NFBGA ZAH 48 3000 TS2PCIE2212ZAHRG1 ACTIVE NFBGA ZAH 48 3000 Green (RoHS & no Sb/Br) Pb-Free (RoHS) Lead/Ball Finish MSL Peak Temp (3) SNAGCU Level-3-260C-168 HR SNAGCU Level-3-260C-168 HR (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated